A fine video sir, and you really did the Taurus 856 justice. I love mine. Some people may think that wheel guns are antiquated, but I beg to differ. The 856 is simple, economical, reliable, concealable, and you’d have plenty of fire power when you’d need it. Honestly, I gave up trying to justify my guns long ago, but the way I see it, if you’re an adult, you shouldn’t have to justify anything. Just wanting something and being able to acquire it legally should be reason enough.
Yes you have a transfer bar and would carry all 6 rounds. You kept an empty round on old single action guns and a few antique revolvers with double action. Today you carry all chambers.
25 yards one handed with a snubbie, is pretty hard day my friend. You did good. I have the model 85, same gun (5 shot) but stainless. Always shoots, never had a problem.
Great video after being through several semi autos have found this revolver to be a good carry. Reliable,accurate and well able to (if needed) stop any aggression.
This revolver has a safety transfer bar so it wont go off if dropped. The bar rides up to pin when you pull trigger. It is safe to carry with 6 rounds. The older revolvers with the pin on hammer are the ones where you have to be careful.
I understand that, but if the manufacturer says in the manual that it can go off if dropped, it'd be wise to consider that 1 in million possiblity. Just like a safety, mechanical.device can fail.
@@capulinamix2 impossible to shoot by way of the hammer dropping as long as the transfer bar doesn't fail, however the firing pin can still float independent of the hammer.
@@ThatDudeSirraj You'd have to drop it from some stupid height on its muzzle to even consider the remote possibility of it going off. If the transfer bar fails, NOTHING HAPPENS. The gun just won't fire at all, but it will not change the fact that it's drop safe. Taurus just like most manufacturers puts those warnings in all their guns for legal, not technical, reasons.
Enjoyed your review. Good shooting. I've had the Taurus model 856 since it was introduced and the model 85 before that. They have served me well. BTW, I have no issues with revolver weight. I'll take extra weight over recoil any day.
Stainless 856 w/black rubber grip. Fantastic accurate revolver. Purchased it a good month ago w/two HKS 10 speed loaders. I've had several Taurus revolvers and semi autos (also have the G2C 9mm at present) throughout the last 30 years and EVERY ONE of them was a superior firearm...... Subscribed :)
'A while' is an understatement lol. Sometimes I want to kick my self for not producing content for so long but life's calls and there's only 24 hours in a day right. Thanks for tuning in! It's good for the soul to make things others enjoy and learn from.
That was fun. I'm right there with you on the 442. I have one, and it works great, but I like the 856 more. The heavier versions of the 856 are available with the black finish, but also an all-stainless model.
The nice thing about that revolver and many modern revolvers is the replacement of the firing pin fixed on the hammer, with a hammer bar safety mechanism. So in the event the gun is dropped the hammer will not make contact with the firing pin unless there is a physical trigger pull. Meaning you can carry on a full cylinder. Great video and very well done! Highlights a great budget revolver that many may not even consider when looking for a gun. I like Taurus revolvers, their semi autos not so much but to each their own.
Well detailed and thoughtful review. Thank you for taking the time to show each detail and function of this product with great presentation. Done like a true pro!
If your revolver uses a transfer bar you can carry all six rounds in the firearm. Carrying 5 rounds in the gun came from the old single actions when the firing pin was situated on the hammer.
I understand that and clearly at least 6 others have stated the same thing in the comments, however there are folks that aren’t comfortable with carrying a round in the chamber of a striker fired pistol either. It’s a matter of choice and comfort more so than function. I mention it because some choose to carry that way until they are more comfortable. But unlike having an empty chamber in a striker, there’s no delay in getting that first round off since the cylinder rotates before firing. They’re just down a round. So then the 856 has 442 capacity. Ah well. If capacity was the issue, the revolver probably wouldn’t be the carry choice anyway. That’s why I don’t carry one. But that’s my choice based on the information I have. I’m just giving people information so they can make their own decisions.
@@ThatDudeSirraj - Your job as an educator is to teach people fully and completely. You need to be letting people know that their fears are unfounded, given how a modern firearm works, and that in the case of a revolver, it won't fire until either the trigger is pulled, or the hammer cocked. ( Both of these actions move the chamber to one side of the barrel under the hammer anyway, and this is when an ND is likely to occur. ) Leaving people to irrational fear due to ignorance is just unacceptable. Lastly... people who are afraid to carry a fully loaded gun either need to be carrying one they are completely familiar with and understand, or simply not carrying one at all. And yes, I have worked as a firearms instructor from time to time, so I know how difficult this can be to convey at times. ( I've been both a soldier and a cop, a lot of years back. ) People often get some really dumb ideas in their heads that can be damn near impossible to dislodge. But you have to work with what you get, not what you want.
@@goodoleme747 - Then that's a first, because I've owned a few Taurus revolvers over the years, and none of their manuals mentioned that. In fact, they listed all the safeties the gun had, including the transfer bar and the lock in the hammer. One way or the other, a gun with a transfer bar will not go off unless the trigger is pulled all the way to the rear.
I dont own one personally, my Snubnose revolvers are Smith's, but if I ever buy one I'll be sure to read the manual, I just figured like most modern revolvers it would have a drop safety or rebound hammer safety.
Enjoyed the informative video very much. Liked the safety tip about keeping an empty cylinder at 12 o'clock high when carrying the gun, also, learned what the 6 is for in Model 856 (holds six rounds). Liked your easy style of delivery and explanation. Keep up the good work.
Keeping the empty cylinder is completely stupid, this gun has a transfer bar mechanism and will NOT fire if dropped. That's just bullshit. Just lose 1/6 capacity for no reason because some youtube fake expert told you so
I had the 5 shot ultra lite M85 a few years back but it was poppy and snappy with the +p loads. I came back because I loved the look of the 856, which I now have this exact model shown in the video hear. Much better for 38 plus p. Great review on a great gun. Thanks!!!
I have a Taurus 856 snubbie love it handles great yes I am not that big and do have small hands the recoil is not that bad plus having great instructors is a big plus .one of my instructors is a retired Leo yes he did carry a revolver for backup taught me a lot yes I am a new hand gun owner
Excellent video. First time listener, and I subscribed at about 1/2 through. I have a Smith and Wesson 442, a Rock Island Armory m 206, and a Taurus 856 Ultra-Lite. If there's a difference in quality between the 442 and the 856, it's beyond my abilities of discernment. And, as you pointed out, in some ways the 856 is actually superior to the 442. The only complaint I have is the gorrila-hand grips. I obtained a set of wood Taurus grips, and a friend of mine who does wood working as a hobby, cut them down for me to open out the area between the trigger guard and the grip. Now I enjoy the gun even more, and the felt recoil is no worse than with the rubber grips.
Hey Matthew! Good deal, can't go wrong with a set of custom grips that fit your hands. I'd like to get a new set for the 442 but I like the gorrila grips lol. They fit pretty well for me and so far my students haven't taken issue with them.
Good video, helped me verify that Taurus is making a pretty good small thirty-eight. Also, it’s perfectly safe to carry a modern revolver w/all six chambers loaded. The gun will NOT fire if dropped on the hammer b/c of the built in safety features in modern revolvers (this has not been true since the old single action cowboy revolvers of the 1800s). I’ve been carrying a revolver since my 1968 rookie year and continue to carry a small J Frame S&W in retirement. BTW, don’t beat yourself up, you’re a pretty good shot @ the distances here w/a little revolver.
Great review. I have the UL model. Love it. Replaced the stock grips with an older set of Uncle Mike’s for a Taurus model 85. As good as those factory grips are, the replacements allow a fuller grip with all fingers. Hogues are probably similar. Also, speedloaders for a K-frame S&W work with the 856.
I have a question, what exactly does +P ammunition stand for, This is my first gun, haven't been out to practise yet. The manuel states it's okay to use for the Tauraus 856. Just curious to know what it really means. Thanks!
Basically it's over pressured ammunition compared to standard ammunition which the +P results in higher velocity and stopping power than standard (non +P) ammo. Keep in mind the +P ammo will have more recoil than standard ammo. The 856 is rated for +P so you should be fine. Hope this helps. Stay safe
I have the the Taurus 605 .357 model. I liked it so much I bought this 856 which has 6-shots not 5 like the 605. I wanted the Ruger SP101 but dam at just under $800 bucks. No thanks! The Taurus is a no brainer.
I also have had the 605 for a while and do want a 6-shot carry revolver. I've looked at the SP101 but that's only 5 shot and also the Kimber K6s which is 6-shot but I don't feel like taking out a 2nd mortgage to buy them (kimber is around $900). For the price and for what I need the Taurus 856 is a no brainer.
We've had one on back-order for my wife in blue since late April and can not even get an estimated date on how long they are on back order from Taurus. Anyone have any experience on current back-order times?
I use the sayin' minute of deer all the time. I like the minute of man statement. 👍 Good shooting I need to run mine more I Just got it and ammo is not easy to come by or pay for.
Any problems with it? Planning to buy it soon but I heard some people say the screw under the cylinder on the right side keeps falling out after a few rounds. I don’t know if that only happens in the ultralight or both the UL and stainless. I do want to have this but some experiences with other owners are scaring me away. Let me know how it has worked out for you, thanks!
Sorry about the delayed response. I have had no issues out of this one. about 350 rounds down the pipe, nothing extravagant but if anything it's smoothed out but nothing has come loose. Hope that helps!
I have the stainless model. Great firearm. Don't beat yourself up about the yards you were shooting from. Typically a snubnose revolver is what I call a "belly" gun, or a get the f*** off me gun. Try shooting from 10 feet instead of yards and see how ya do. Stay safe
Opinions vary on this. If a small double action revolvers main purpose is self protection. Then an exposed hammer causes the shooter to develop a bad habit while shooting. Thumb cocking is not self defense practical. Taurus makes some double action only concealed hammer models which I believe are much more suited to that purpose.
Since they,Taurus has have the ceo for awhile, Taurus firearms have been getting better made. There are some that aren't but, the revolvers I have,617 stainless steel, 85same as 617 stainless and the 856s, 2 and 3 inch both with night sight up front shoot real well for me. I even have a Taurus M65 in .357,.38 and,it runs real well also. Wish the made a 65 stainless in 3 inch also. I only own revolvers no SEMI automatic. Revolvers for me never have jammed
I watch many gun videos on TH-cam and this is the first of your videos i have seen. Two words, Great Video!!! I just found online and bought the exact 856 38 revolver in the 22 ounce weight. Thank you.
I agree with Mr Andrews, today's revolvers all have transfer bar safety's I would like the 856 in an ultra-lite enclosed hammer double action only model I am picking up my stainless 856 nov 3rd VOTE PRESIDENT TRUMP
Your not going to be shooting at anything at 17 yards away from you with a 2 inch revolver. Reality distances of 2,3,5, and 10 feet are more reality based.
Lol....all modern day double action revolvers have have a transfer bar and are perfectly safe to carry 6 rounds....you should always practice shooting double action....video was OK otherwise.
@Rick Rude I let people have their opinions but you will NOT misquote anything that I say. Between minutes 10 and 11 I explain that some people leave a round out, not that o recommend it. It’s the same as how many new carriers will not have a chambered round when they first begin to carry a striker fired pistol. That’s their choice. Never my recommendation. If you have an issue with the OEM stating in THIER MANUAL that they don’t consider the firearm 100% drop safe, why would I say that it is. I didn’t design, engineer, manufacture or sell it. Take it up with TAURUS not me. Because if I say otherwise, there’s gonna be some random that’s going to pop up and say “but the manufacturer said...” And lastly.... you’re really giving me flak about shooting in SA more than DA?? Lol. How about you walk out to YOUR range and shoot YOUR revolver in YOUR video so everyone can enjoy YOUR double action shooting while munching on some apple pie... Then let us know what YOUR students think when they are taking YOUR classes. #WhoDaThunkIt
@@Icarianbrother When I click on your name your page still says "This channel doesn't have any content". I'm flattered that after an entire year you decided to return to the conversation but everything in my previous reply still stands.
Brutally honest. A snub nose revolver is hard to master. I watched a vidio with Dave Mundelin shoot a 10 inch balloon at 200 yards with a 38. Practice practice practice and you should be able to achieve compact 9mm equivalent results without the worries of stove piping or failure to feed the next round.
Indeed. However, read the manual. When the manufacturer says there's a chance of it going off if dropped, they recognize there is always a change of something failing, pin block included.
@@ThatDudeSirraj They have been doing that since the revolver was invented because there were no firing pin blocks or transfer bars....look up hickok45 and single actions
A fine video sir, and you really did the Taurus 856 justice. I love mine. Some people may think that wheel guns are antiquated, but I beg to differ. The 856 is simple, economical, reliable, concealable, and you’d have plenty of fire power when you’d need it. Honestly, I gave up trying to justify my guns long ago, but the way I see it, if you’re an adult, you shouldn’t have to justify anything. Just wanting something and being able to acquire it legally should be reason enough.
Yes you have a transfer bar and would carry all 6 rounds. You kept an empty round on old single action guns and a few antique revolvers with double action. Today you carry all chambers.
i still keep one empty. Because i know that next shot means flesh wound.
I have the same 856 with bobbed hammer. Stays with me at all times where possible. I love it.
25 yards one handed with a snubbie, is pretty hard day my friend.
You did good.
I have the model 85, same gun (5 shot) but stainless. Always shoots, never had a problem.
That was before current internal trigger bar that keep the hammer from contacting the firing pin. Old tech brah.
Great video after being through several semi autos have found this revolver to be a good carry. Reliable,accurate and well able to (if needed) stop any aggression.
This revolver has a safety transfer bar so it wont go off if dropped. The bar rides up to pin when you pull trigger. It is safe to carry with 6 rounds. The older revolvers with the pin on hammer are the ones where you have to be careful.
I understand that, but if the manufacturer says in the manual that it can go off if dropped, it'd be wise to consider that 1 in million possiblity. Just like a safety, mechanical.device can fail.
@@ThatDudeSirraj I was surprised when I read that warning in the owner's manual, but then figured it was a lawyer's cya.
@@ThatDudeSirraj the safety transfer bar makes it imposible to shoot unless the trigger is fully pressed
@@capulinamix2 impossible to shoot by way of the hammer dropping as long as the transfer bar doesn't fail, however the firing pin can still float independent of the hammer.
@@ThatDudeSirraj You'd have to drop it from some stupid height on its muzzle to even consider the remote possibility of it going off. If the transfer bar fails, NOTHING HAPPENS. The gun just won't fire at all, but it will not change the fact that it's drop safe.
Taurus just like most manufacturers puts those warnings in all their guns for legal, not technical, reasons.
Enjoyed your review. Good shooting. I've had the Taurus model 856 since it was introduced and the model 85 before that. They have served me well.
BTW, I have no issues with revolver weight. I'll take extra weight over recoil any day.
Stainless 856 w/black rubber grip. Fantastic accurate revolver. Purchased it a good month ago w/two HKS 10 speed loaders. I've had several Taurus revolvers and semi autos (also have the G2C 9mm at present) throughout the last 30 years and EVERY ONE of them was a superior firearm...... Subscribed :)
Hey Jesse! Great feedback. Thanks for the Sub!
Haven't seen you around in around in while. Can't believe i just happened to catch you on my subscription feed. Good video!
'A while' is an understatement lol. Sometimes I want to kick my self for not producing content for so long but life's calls and there's only 24 hours in a day right. Thanks for tuning in! It's good for the soul to make things others enjoy and learn from.
Good video man! I love my 856
That was fun. I'm right there with you on the 442. I have one, and it works great, but I like the 856 more. The heavier versions of the 856 are available with the black finish, but also an all-stainless model.
Magnificent. Best value in its class. The 856 defender also looks like a winner. Agreed- no ultralight for me. 🙏
This gun has a transfer bar hammer safety, so there is no way dropping it can make it fire.
The nice thing about that revolver and many modern revolvers is the replacement of the firing pin fixed on the hammer, with a hammer bar safety mechanism. So in the event the gun is dropped the hammer will not make contact with the firing pin unless there is a physical trigger pull. Meaning you can carry on a full cylinder. Great video and very well done! Highlights a great budget revolver that many may not even consider when looking for a gun. I like Taurus revolvers, their semi autos not so much but to each their own.
Hey thanks! I agree, I'm not a huge fan of their Semi-Autos in comparison to other reputable brands but their revolvers definitely meet the mark.
Well detailed and thoughtful review. Thank you for taking the time to show each detail and function of this product with great presentation. Done like a true pro!
If your revolver uses a transfer bar you can carry all six rounds in the firearm. Carrying 5 rounds in the gun came from the old single actions when the firing pin was situated on the hammer.
I understand that and clearly at least 6 others have stated the same thing in the comments, however there are folks that aren’t comfortable with carrying a round in the chamber of a striker fired pistol either. It’s a matter of choice and comfort more so than function. I mention it because some choose to carry that way until they are more comfortable. But unlike having an empty chamber in a striker, there’s no delay in getting that first round off since the cylinder rotates before firing. They’re just down a round. So then the 856 has 442 capacity. Ah well. If capacity was the issue, the revolver probably wouldn’t be the carry choice anyway. That’s why I don’t carry one. But that’s my choice based on the information I have. I’m just giving people information so they can make their own decisions.
@@ThatDudeSirraj - Your job as an educator is to teach people fully and completely.
You need to be letting people know that their fears are unfounded, given how a modern firearm works, and that in the case of a revolver, it won't fire until either the trigger is pulled, or the hammer cocked. ( Both of these actions move the chamber to one side of the barrel under the hammer anyway, and this is when an ND is likely to occur. )
Leaving people to irrational fear due to ignorance is just unacceptable.
Lastly... people who are afraid to carry a fully loaded gun either need to be carrying one they are completely familiar with and understand, or simply not carrying one at all.
And yes, I have worked as a firearms instructor from time to time, so I know how difficult this can be to convey at times. ( I've been both a soldier and a cop, a lot of years back. )
People often get some really dumb ideas in their heads that can be damn near impossible to dislodge. But you have to work with what you get, not what you want.
@@guarddog318 In his defense, it does say in the manual that, Taurus believe's this revolver should be carried with an empty chamber under the hammer.
@@goodoleme747 - Then that's a first, because I've owned a few Taurus revolvers over the years, and none of their manuals mentioned that.
In fact, they listed all the safeties the gun had, including the transfer bar and the lock in the hammer.
One way or the other, a gun with a transfer bar will not go off unless the trigger is pulled all the way to the rear.
Great presentation, very good and pertinent details, thank you!
Thank you for watching and letting me know what you thought!
All modern day revolvers have an internal safety, most use a transfer bar, so you can carry fully loaded. Since the mid 70s.
Thanks
The 856 is solid. 6 shots of a good caliber. Perfect for most people. Nice video. Thanks.
I dont own one personally, my Snubnose revolvers are Smith's, but if I ever buy one I'll be sure to read the manual, I just figured like most modern revolvers it would have a drop safety or rebound hammer safety.
Vids are informative. Great job and keep shootin wheelguns !!!
Enjoyed the informative video very much. Liked the safety tip about keeping an empty cylinder at 12 o'clock high when carrying the gun, also, learned what the 6 is for in Model 856 (holds six rounds). Liked your easy style of delivery and explanation. Keep up the good work.
Keeping the empty cylinder is completely stupid, this gun has a transfer bar mechanism and will NOT fire if dropped. That's just bullshit. Just lose 1/6 capacity for no reason because some youtube fake expert told you so
I had the 5 shot ultra lite M85 a few years back but it was poppy and snappy with the +p loads. I came back because I loved the look of the 856, which I now have this exact model shown in the video hear. Much better for 38 plus p. Great review on a great gun. Thanks!!!
Good review. I would like to get one with the 3" barrel and hi viz sights for my wife. I already have the 605 in 357. 9mm would be nice too.
Appreciate it! Yes, 9mm would be nice.
The 856 Defender in 3 “ barrel will be nice. Looking to get one
I have a Taurus 856 snubbie love it handles great yes I am not that big and do have small hands the recoil is not that bad plus having great instructors is a big plus .one of my instructors is a retired Leo yes he did carry a revolver for backup taught me a lot yes I am a new hand gun owner
That's a nice revolver
Excellent video. First time listener, and I subscribed at about 1/2 through. I have a Smith and Wesson 442, a Rock Island Armory m 206, and a Taurus 856 Ultra-Lite. If there's a difference in quality between the 442 and the 856, it's beyond my abilities of discernment. And, as you pointed out, in some ways the 856 is actually superior to the 442. The only complaint I have is the gorrila-hand grips. I obtained a set of wood Taurus grips, and a friend of mine who does wood working as a hobby, cut them down for me to open out the area between the trigger guard and the grip. Now I enjoy the gun even more, and the felt recoil is no worse than with the rubber grips.
Hey Matthew! Good deal, can't go wrong with a set of custom grips that fit your hands. I'd like to get a new set for the 442 but I like the gorrila grips lol. They fit pretty well for me and so far my students haven't taken issue with them.
Good video, helped me verify that Taurus is making a pretty good small thirty-eight. Also, it’s perfectly safe to carry a modern revolver w/all six chambers loaded. The gun will NOT fire if dropped on the hammer b/c of the built in safety features in modern revolvers (this has not been true since the old single action cowboy revolvers of the 1800s). I’ve been carrying a revolver since my 1968 rookie year and continue to carry a small J Frame S&W in retirement. BTW, don’t beat yourself up, you’re a pretty good shot @ the distances here w/a little revolver.
Great review. I have the UL model. Love it. Replaced the stock grips with an older set of Uncle Mike’s for a Taurus model 85. As good as those factory grips are, the replacements allow a fuller grip with all fingers. Hogues are probably similar.
Also, speedloaders for a K-frame S&W work with the 856.
I use rubber strip clips that way they lay flat in the pocket, with no cylinder type bulge.
Then whats the transfer bar supposed to do if not protect against unintended discharges?
I have a question, what exactly does +P ammunition stand for, This is my first gun, haven't been out to practise yet. The manuel states it's okay to use for the Tauraus 856. Just curious to know what it really means. Thanks!
Basically it's over pressured ammunition compared to standard ammunition which the +P results in higher velocity and stopping power than standard (non +P) ammo. Keep in mind the +P ammo will have more recoil than standard ammo. The 856 is rated for +P so you should be fine. Hope this helps. Stay safe
I have the the Taurus 605 .357 model. I liked it so much I bought this 856 which has 6-shots not 5 like the 605. I wanted the Ruger SP101 but dam at just under $800 bucks. No thanks! The Taurus is a no brainer.
Very Cool! Just found out my step-dad has an SP101... Going to be getting that review in for sure!!
I also have had the 605 for a while and do want a 6-shot carry revolver. I've looked at the SP101 but that's only 5 shot and also the Kimber K6s which is 6-shot but I don't feel like taking out a 2nd mortgage to buy them (kimber is around $900). For the price and for what I need the Taurus 856 is a no brainer.
We've had one on back-order for my wife in blue since late April and can not even get an estimated date on how long they are on back order from Taurus. Anyone have any experience on current back-order times?
Nice video. Good information and presentation Thanks!
I have the heritage roscoe 38spl made by taurus and its a really nice gun it has the old school style to it
I use the sayin' minute of deer all the time. I like the minute of man statement. 👍 Good shooting I need to run mine more I Just got it and ammo is not easy to come by or pay for.
Excelent revolver
I have the model 605 in 357 stainless version, mainly because I have a smith 686 4 inch.
Any problems with it? Planning to buy it soon but I heard some people say the screw under the cylinder on the right side keeps falling out after a few rounds. I don’t know if that only happens in the ultralight or both the UL and stainless. I do want to have this but some experiences with other owners are scaring me away. Let me know how it has worked out for you, thanks!
Sorry about the delayed response. I have had no issues out of this one. about 350 rounds down the pipe, nothing extravagant but if anything it's smoothed out but nothing has come loose. Hope that helps!
Great review, thank you!
I have the stainless model. Great firearm. Don't beat yourself up about the yards you were shooting from. Typically a snubnose revolver is what I call a "belly" gun, or a get the f*** off me gun. Try shooting from 10 feet instead of yards and see how ya do. Stay safe
Opinions vary on this. If a small double action revolvers main purpose is self protection. Then an exposed hammer causes the shooter to develop a bad habit while shooting. Thumb cocking is not self defense practical. Taurus makes some double action only concealed hammer models which I believe are much more suited to that purpose.
The 856 is a double action pistol.🍻
Great review, I like your approach, subbed
I tried to find some more of your videos and couldn't do it. ???
Hey. I'm not sure. All of my content is under my ThatDudeSirraj channel.
Since they,Taurus has have the ceo for awhile, Taurus firearms have been getting better made. There are some that aren't but, the revolvers I have,617 stainless steel, 85same as 617 stainless and the 856s, 2 and 3 inch both with night sight up front shoot real well for me. I even have a Taurus M65 in .357,.38 and,it runs real well also. Wish the made a 65 stainless in 3 inch also. I only own revolvers no SEMI automatic. Revolvers for me never have jammed
I watch many gun videos on TH-cam and this is the first of your videos i have seen. Two words, Great Video!!!
I just found online and bought the exact 856 38 revolver in the 22 ounce weight.
Thank you.
Hey Appreciate that! Glad I could be of service! Happy Shootin'!!
25 yards long way for a snubby. Nice video
I agree with Mr Andrews, today's revolvers all have transfer bar safety's
I would like the 856 in an ultra-lite enclosed hammer double action only model
I am picking up my stainless 856 nov 3rd VOTE PRESIDENT TRUMP
✊🏾✊🏾✊🏾
Love the shirt bro! Just got this firearm.
It's been a few months, how do you like it?
Love Mine EDC 3" Ultra Lite and my back Up 2"
Great video nice shooting
Can this same model work with fmj 125 and 130 grain fmj ? Just ordered some but it doesn’t say +p wondering if it will still work ?
The manual States that the weapon is +P capable.
I read it's ok to snoot +P but in limited quantity. I practice with standard and carry with +P.
I'm really starting to like this gun.
Indeed. I still think it's good overall.
Nice revolver, I have one.
Thumbs up just for the shirt!
Ha, Thanks! I have a few more of those.
Your not going to be shooting at anything at 17 yards away from you with a 2 inch revolver. Reality distances of 2,3,5, and 10 feet are more reality based.
Lol....all modern day double action revolvers have have a transfer bar and are perfectly safe to carry 6 rounds....you should always practice shooting double action....video was OK otherwise.
In a real shtf situation you're adrenaline pumpin you aren't gonna think twice to cock the hammer yer just gonna pull the trigger
@Rick Rude I let people have their opinions but you will NOT misquote anything that I say. Between minutes 10 and 11 I explain that some people leave a round out, not that o recommend it. It’s the same as how many new carriers will not have a chambered round when they first begin to carry a striker fired pistol. That’s their choice. Never my recommendation. If you have an issue with the OEM stating in THIER MANUAL that they don’t consider the firearm 100% drop safe, why would I say that it is. I didn’t design, engineer, manufacture or sell it. Take it up with TAURUS not me. Because if I say otherwise, there’s gonna be some random that’s going to pop up and say “but the manufacturer said...”
And lastly.... you’re really giving me flak about shooting in SA more than DA?? Lol. How about you walk out to YOUR range and shoot YOUR revolver in YOUR video so everyone can enjoy YOUR double action shooting while munching on some apple pie... Then let us know what YOUR students think when they are taking YOUR classes. #WhoDaThunkIt
Well said!!!
@@Icarianbrother When I click on your name your page still says "This channel doesn't have any content". I'm flattered that after an entire year you decided to return to the conversation but everything in my previous reply still stands.
Good video!
Bro you can carry six shots in a six shoot modern revolver that’s only for the old school single action revolvers
Brutally honest. A snub nose revolver is hard to master. I watched a vidio with Dave Mundelin shoot a 10 inch balloon at 200 yards with a 38. Practice practice practice and you should be able to achieve compact 9mm equivalent results without the worries of stove piping or failure to feed the next round.
Indeed! Appreciate that feedback James.
Check out Hickok 45 if u want to see someone who has mastered shooting a revolver
It should have a firing pin block safety in it incase its dropped.
Indeed. However, read the manual. When the manufacturer says there's a chance of it going off if dropped, they recognize there is always a change of something failing, pin block included.
smiths with firing pins on the hammer use a hammer block and a rebound slide safety
Good tip on the empty cylinder.
Indeed. When I first heard it, I thought dang welp thats simple enough. Why didn't I think of that?🤔
@@ThatDudeSirraj They have been doing that since the revolver was invented because there were no firing pin blocks or transfer bars....look up hickok45 and single actions
Good review; I subbed!