Simple DIY: Repairing Galvanized Sheet Metal

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 มิ.ย. 2024
  • Joy of Welding Series: Join Austin for some good old-fashioned galvanized steel welding as he repairs a deer feeder.
    Have a question, or want feedback on your welds? Join the WELD App beta.weld.com
    Sign up to compete in Clash Of The Grinders www.weld.com/clashofthegrinders
    Watch This Next: Galvanized Steel Welding - How to safely weld and blend • Galvanized Steel Weldi...
    Check Out The Great Gear From Our Trusted Partners
    Learn more about the ESAB Rebel 285ic foxly.link/tw3ite
    Save 10% on Outlaw Leather Gear with WELD10 foxly.link/bwqtJG
    Caiman Welding Gloves - foxly.link/frIVPh
    Subscribe to our Podcast
    Apple Podcasts podcasts.apple.com/us/podcast...
    Spotify
    open.spotify.com/show/4qWd24Y...
    Ways to Work with Us
    Share your work in the Weld App to let us know what you want to see beta.weld.com/
    Want to make a video with us www.weld.com/partnership
    Connect with us!
    🧰 Web: weld.com
    📣 Instagram: / welddotcom
    📲 beta.weld.com/
    🎥 TikTok: / welddotcom
    Question - What do you need to do to safely weld galvanized steel?
    Disclaimer: Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
    ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK.
    EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.
    Time Codes
    00:00 Introduction
    00:48 Assessing The Damage
    02:14 Cutting Down The Sides
    04:01 Pulling Measurements
    06:46 Laying Out Cuts
    08:05 Cutting Galvanized Sheet
    09:50 DeBurring & Prepping The Edges
    10:20 Bending Sheet Metal Without A Break
    11:44 Fixing A Happy Little Accident
    13:18 Prepping Galvanized For Welding
    14:03 ESAB Rebel EMP 285ic Settings
    14:43 Tacking Side
    16:08 MIG Welding Seams
    17:30 Results
    18:08 Applying Cold Galv
    #galvanizedsteelwelding #welding #repair #deerfeeder #fabrication #welding #welddotcom
    About:
    Welcome to our Channel! We're passionate about providing a comprehensive space where welding enthusiasts of all levels can gather and learn.

ความคิดเห็น • 67

  • @vladorlovsky6623
    @vladorlovsky6623 2 หลายเดือนก่อน +18

    “I’ve bent the wrong side.” Been there my brother. More times than I choose to admit. 🙃

    • @TYSuggested
      @TYSuggested 2 หลายเดือนก่อน +2

      But hey, we don't make mistakes, we have happy little accidents :)

    • @austinhargett5792
      @austinhargett5792 2 หลายเดือนก่อน

      Haha it suuuucked lots of hammer that was cut. 😅

  • @kwaaaa
    @kwaaaa 2 หลายเดือนก่อน +24

    "I bent the wrong side" -- I can relate to this down to my soul. No matter how big or small of a project, I will manage to find something that should've been a 10 minute job turned into an hour correction.

    • @earlyriser8998
      @earlyriser8998 2 หลายเดือนก่อน +2

      The joke in our house is a '5 min job'

    • @buildaboiworkshop
      @buildaboiworkshop 2 หลายเดือนก่อน +1

      The last bolt is always the most cursed

    • @tinkering123
      @tinkering123 2 หลายเดือนก่อน +1

      That "Little" job would certainly take me all day.

    • @melgross
      @melgross 2 หลายเดือนก่อน +2

      Just yesterday, I put several countersinks for screw holes on the wrong side of the part. Fortunately, I was able to spot weld them closed, drill through the other side where the hole was still open and countersink the correct side. It just takes a small amount of lack in concentration.

    • @buildaboiworkshop
      @buildaboiworkshop 2 หลายเดือนก่อน +1

      @@melgross aren't countersinks supposed to happen after the hole is drilled?

  • @user-pl1pj2ms1v
    @user-pl1pj2ms1v 2 หลายเดือนก่อน +3

    Well done ! You made a not so fun project into an entertaining and informative show ! And made welding that too thin galvanized look easy !

    • @austinhargett5792
      @austinhargett5792 2 หลายเดือนก่อน

      Haha 😂glad you appreciate some dry humor and my mistakes 😅

  • @harrycaul2494
    @harrycaul2494 2 หลายเดือนก่อน

    You are to welding what Bob Ross was to painting - and i mean that in the most complimentary way. Great video. Better than most TV that is on here this week

  • @phillipchambers8487
    @phillipchambers8487 2 หลายเดือนก่อน +2

    Man, I Love these Videos! You really have got the Laid Back Hippy Bob Ross Mannerism, and the way he talked down to a Science. I should know, because back in my younger days me and a few of my Friends used to always watch his Show “The Joy of Painting” while partaking in a little Smoking session if you know what I mean. lol (That was in my younger days though) I am a responsible Adult now.
    When you said “that just really pissed me right off”in your Bob Ross voice, I was rolling on the Floor Laughing.
    Who said Welding Videos can’t be Fun? Not me, because these are Hilarious, and they are also very Educational at the same time.
    Keep up the Great Work, Bob Jr.

    • @austinhargett5792
      @austinhargett5792 2 หลายเดือนก่อน

      Means more than you know! Thank you

  • @randywells742
    @randywells742 2 หลายเดือนก่อน

    I'm just learning to weld as a hobby and to be able to be more useful around the house. This is the first episode I've seen of this series and it has certainly made my hole day! I do a lot of those types of goofs on just about every project I do.

  • @JonDingle
    @JonDingle 2 หลายเดือนก่อน +1

    Having welded a lot of galv stuff and made gates from galv tube, all you have to do is grind off as much as you can but be aware, grinding friction creates heat which smears the galv. You willnever get all the galv off unless you disolve the galv with vinegar. Also, galv steel welding spits and fires back at you, keep your head out of the smoke and crack on. Generally I use Mig but have used 7018 successfully.

  • @sohnwehseler9327
    @sohnwehseler9327 2 หลายเดือนก่อน

    Freggen hilarious! I busted out laughing, this was the best and exactly what I needed. My favorite episode so far.
    So nice to see a real life project with mistakes and level 10 humor.
    Love it!

  • @mememe5231
    @mememe5231 2 หลายเดือนก่อน +2

    Great video! But, no fluffy clouds in the paint job 😂

    • @austinhargett5792
      @austinhargett5792 2 หลายเดือนก่อน

      Haha 😂 missed opportunity there

  • @akawireguy1197
    @akawireguy1197 2 หลายเดือนก่อน +1

    Lightly score the line with your cutting wheel. It will bend nicely on that line with a bit of encouragement. Learned that from someone else on YT and it does work.

  • @WeldingForJesus
    @WeldingForJesus 2 หลายเดือนก่อน +1

    I welded galv with 6013 and 7018, the latter worked better for me. Problem I had was that it was a hollow structure on the goods, so couldn't get the galv on the inside off. Did that once without a half mask and never again! Man that stuff makes you sick swiftly!

  • @hobbyhermit66
    @hobbyhermit66 2 หลายเดือนก่อน +1

    Lol. Been there done that.
    I've found that sandwiching the metal to be bent between two 2x4s helps get a little sharper bend.

    • @austinhargett5792
      @austinhargett5792 2 หลายเดือนก่อน

      Thanks for the tip! I hope to never have to do it this way again 😂

  • @mixpick138
    @mixpick138 2 หลายเดือนก่อน +2

    Too much fun! Love these vids... 🙂

  • @DavidHiscox-fo2ur
    @DavidHiscox-fo2ur 2 หลายเดือนก่อน +3

    Weld galvanized with 308-16 stainless rod ; use straight polarity : penetration is low but use high enough voltage as required; you can even make a second pass ! No grinding; the straight polarity pushes the zinc away from the weld similar to aluminum welding with AC has a surface cleaning effect: the 308-16 with straight polarity pushes the zinc aside continously allowing the ss to reach the steel and bond.
    No cleanup necessary; over time the zinc moves to weld, no rust results , no paint required. Try It !

    • @austinhargett5792
      @austinhargett5792 2 หลายเดือนก่อน

      Even on sheet metal with stick?

  • @joemurray8902
    @joemurray8902 2 หลายเดือนก่อน +1

    There are no mistakes, only happy little corners

    • @austinhargett5792
      @austinhargett5792 2 หลายเดือนก่อน +1

      That was a sad corner and I was not happy 😂

  • @tinkering123
    @tinkering123 2 หลายเดือนก่อน +1

    Nice job.
    Much better than I could do.

  • @russianguy6469
    @russianguy6469 2 หลายเดือนก่อน

    I love those videos. Excellent

  • @appmath
    @appmath 2 หลายเดือนก่อน +3

    Flux core for galvanized I prefer.

  • @buildaboiworkshop
    @buildaboiworkshop 2 หลายเดือนก่อน +1

    I love this series so so much;
    THANK YOU
    13:00
    😂😂😂😂😂😂😂😂😂😂

  • @thezucc2478
    @thezucc2478 2 หลายเดือนก่อน

    Bob ross of welding

  • @andrewshedron425
    @andrewshedron425 2 หลายเดือนก่อน

    Next time try putting the metal in between two boards. Keeps everything rigid and easier to get a decent bend.

  • @melgross
    @melgross 2 หลายเดือนก่อน +1

    I’d love to try some Cubitron 3 products, but either you have to buy 25 disks at around $7 apiece, or a large number of belts. One belt for my 6 x 48 is close to $100 from MSC. These prices are just too much to just try a product. I would buy a pack of 5 disks.

    • @austinhargett5792
      @austinhargett5792 2 หลายเดือนก่อน

      I’ll send it up the chain.. lol literally though I’d like to see that too!

  • @dshopkins
    @dshopkins 2 หลายเดือนก่อน +1

    Got a link to buy one of those “Support Your Local Welder” caps?

  • @bleurose2102
    @bleurose2102 4 ชั่วโมงที่ผ่านมา

    Incredible

  • @mememe5231
    @mememe5231 2 หลายเดือนก่อน +1

    Can’t break character!😅

  • @sucre9995
    @sucre9995 2 หลายเดือนก่อน

    All welders in World 🌍🧑‍🏭 love so much Welding galvenized Steel 🥰
    🤮😭 Hâte that !!!! 🤬

  • @NikeaTiber
    @NikeaTiber 2 หลายเดือนก่อน

    In my old shop I could always tell when someone had been welding galvanized since the air inside would look like a hot tub some people got "frisky" in.
    🤮

  • @michaelgonzalez8863
    @michaelgonzalez8863 2 หลายเดือนก่อน +1

    Nice

  • @markdeitchman8938
    @markdeitchman8938 2 หลายเดือนก่อน +1

    I can't tell if you were kidding, or being serious at 15:00. is it okay to put a 30 amp breaker on a 120 volt circuit? I am thinking of doing this so my 140 amp 120 volt mig welder won't keep popping the breaker when I am welding at the top end of around 130 to 140 amps. any feedback is appreciated.

    • @matthufham
      @matthufham 2 หลายเดือนก่อน

      dedicated welding circuit, 120v 30 Amp, non gfci is ok with NEC code.

    • @matthufham
      @matthufham 2 หลายเดือนก่อน

      also 120 volt 30 Amp rv/camper outlet. Add an adapter for your cord's plug.

  • @keithsargent6963
    @keithsargent6963 2 หลายเดือนก่อน

    My shop teacher must have said a thousand times that welding galvanized metal was deadly because of the fumes.

    • @Welddotcom
      @Welddotcom  2 หลายเดือนก่อน

      it can make you sick in short term exposure, long term it can cause cancer and nerve damage. not gonna fall out, but youll get really sick.

  • @Chris-vx5kp
    @Chris-vx5kp 2 หลายเดือนก่อน +1

    That white smoke from welding the galvanized made me feel nauseated just by looking at it.

  • @user-uh9xk7bm7h
    @user-uh9xk7bm7h 2 หลายเดือนก่อน

    Never cared for aluminum if you’re welded a fall right through gets too hot

    • @CertifiedSkank
      @CertifiedSkank 2 หลายเดือนก่อน +1

      Those fumes really got to ya, eh?

  • @77zrod46
    @77zrod46 2 หลายเดือนก่อน +2

    Please don't assume being outside and keeping your nose and face out of galvanized welding gas as ok. It should be done outside under a tarp after as much coating removal as possible, then welded with proper ventilation and P.P.E...

    • @sleyeborgrobot6843
      @sleyeborgrobot6843 2 หลายเดือนก่อน

      you have to leave the coating on and burn it off under the tarp like a sweat lodge.

  • @jamesbrandon8520
    @jamesbrandon8520 2 หลายเดือนก่อน

    I don’t care how much you grind on hot dipped galvanized on I beams and heavier metal it’ll still pull up out of the metal and run bad the entire time

  • @roberthoy9922
    @roberthoy9922 2 หลายเดือนก่อน +3

    I have gotten zinc fume poisoning before. That really sucks thank goodness for milk.

    • @buildaboiworkshop
      @buildaboiworkshop 2 หลายเดือนก่อน +2

      Metal fume fever 🤮🤮🤮

  • @roberthoy9922
    @roberthoy9922 2 หลายเดือนก่อน

    211 flux core. I’ve used
    211
    232
    Core shield 8
    And stick.
    I prefer the 211 .068 or .072
    What kind of tradesmen am I?