Master Your 5F Welding Techniques Using 7018 Welding Rods
ฝัง
- เผยแพร่เมื่อ 26 มิ.ย. 2024
- Austin teaches you the proper welding techniques to pass your 5F weld test using 3/32 & 1/8 7018.
Have a question, or want feedback on your welds? Join the WELD App foxly.link/fRUvUg
Special thanks to the William Robert Marshall Center For Advanced Careers for having us!
Watch This Next: 5G 7018 Fill and Cap: 2in Sch 80 Pipe • 5G 7018 Fill and Cap: ...
Check Out The Great Gear From Our Trusted Partners
Learn more about the Lincoln Electric PowerWave - foxly.link/v07ysI
Save 10% with WELD10 on Outlaw Leather Products - foxly.link/bwqtJG
Caiman Welding Gloves - foxly.link/frIVPh
Subscribe to our Podcast
Apple Podcasts - foxly.link/VYv2iJ
Spotify - foxly.link/sgPEGB
Ways to Work with Us
Share your work in the Weld App to let us know what you want to see beta.weld.com/
Want to make a video with us www.weld.com/partnership
Connect with us!
🧰 Web: weld.com
📣 Instagram: / welddotcom
📲 beta.weld.com/
🎥 TikTok: / welddotcom
Question - Which size rod do you prefer for a 5F weld, ⅛ or 3/32 7018?
Disclaimer: Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK.
EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.
Time Codes
00:00 Introduction
00:58 Setting Up Your Welding Machine
02:28 Arc Force & Hot Start
03:13 5F Position With 3/32 7018
04:47 Rod Angle For 5F
05:37 Lighting Up Side 1 3/32 Rod
06:28 Preventing Undercut
08:02 Second Rod Side 1 3/32
10:09 How To Prevent Cold Starts
11:18 Third Rod Side 1 3/32
13:48 Getting A Good Tie In On The Bottom Side 2
17:02 Second Rod Side 2 3/32
18:34 Cleaning Up Your Weld With A File
20:38 Switching To 1/8 7018
22:08 First Rod Side 1 1/8
23:42 How To Wet The Toes Of Your Weld
24:29 Second Rod Side 1 1/8
25:35 Grinding Bottom Tie In
28:37 Outro
#weldingtest #7018 #stickwelding #smaw #weldingschool
About: Welcome to our Channel! We're passionate about providing a comprehensive space where welding enthusiasts of all levels can gather and learn. Whether you are a welding student, hobbyist, welding enthusiast, or a seasoned professional, we try to have a mix of content to help everyone learn more about this amazing trade skill.
The is an exceptionally good video; excellent dialogue during and after the weld. As well, the machine set up was on point. Arc force in not necessary unless you are up on the cold steel of a Highrise construction project.
Thank you Kindly -Austin
These students are lucky to have such good tuition in such a well appointed college
This was a Highschool for the Trades! theyre getting exposed EARLY these days
Well done ! good lesson and no bull !
Thank you glad you enjoyed it!
Nice weld bro😁
Thanks!!
Hell yeah how you liking that Fein grinder? I daily the 6” with a deadman’s switch and it’s fantastic
In Thailand working welder Florida
Hi from INDIA
Hi from the USA!
5/32 6010 on 1/8'' base metal and a 3/16'' gap vertical down fills in 1 pass, 1/8 sheet is very cheap for root tests?
Not sure what your question is, Id blow a hole with that set up personally-Austin
"Damn...I'm out!" love it.
🤣
🔥🔥🔥🔥
Thanks for the flames friend!
No it ain't you turn that dig down you turn that amperage up the machine I was with daily I read 7018 vertical up on really thin stuff and it's quick it ain't slow how do you get your kilojoules per millimeter down you turn the Dig Down you turn the amperage up and you go faster that's how it works
Idk what you wrote looks very messy. Turn dig up for 6010 root no dig needed for 7018 if any 10% that's all.
you made my head hurt trying to read that 🤣 thanks for the pointers okie doke
on a scale of planned parenthood to joe biden - how much did you like these kids ?
They were very respectful and good listeners, they pretty much laid down the same weld after the demonstration. -Austin
@@Welddotcom so almost as much as joe biden - thanks - some random internet troll