You should really recommend having wobble socket adapters if that is what you are going to use. Your average DIYer doesn't know about tools... and wobble joints are not something that comes in most tool kits.
Is that the number six spark plug you replaced. They say ford mercury marquis number there cylinder different than other automotive companies. I have a misfire on number six .
I'm dreading doing this so bad,and i dont want to get overcharged by the shop. my 2005 GM is at 140k miles and i dont know if the sark plugs were ever changed and if they were it was before 30k miles. so i know i need them regardless
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Excellent information and presentation! I’ve been wondering about that fuel rail for a while. Thank you! 😁
Straight forward practical demonstration. Thank you.
Good idea before installing new spark plug is to check that the proper gap is set on the electrode.
Thanks. I'm kinda dumb with the newer models after 95. I had a 91 and 93 before, but they used plug wires. This was very helpful. Thank you again.
You should really recommend having wobble socket adapters if that is what you are going to use. Your average DIYer doesn't know about tools... and wobble joints are not something that comes in most tool kits.
Is that the number six spark plug you replaced. They say ford mercury marquis number there cylinder different than other automotive companies. I have a misfire on number six .
i really like the way you record it was very helpful
Everyone argues on how much torque is needed for the Spark Plugs. What should I torque them to?
How do you clean the mass airflow sensor on the electronic throttle body?
I'm dreading doing this so bad,and i dont want to get overcharged by the shop. my 2005 GM is at 140k miles and i dont know if the sark plugs were ever changed and if they were it was before 30k miles. so i know i need them regardless
For anyone wondering All Data states the spark plug toque is 11 ft/lb
about how much is it for that job?
Very convenient (for your video) that you didn't do the passenger side. You can't do the first one on the passenger side this way.
I have two breather tubes going to my inlet tube
It's not necessary but I start the engine after each plug is replaced.
159 ft pounds of torque sounds like a lot. Is that reliable
Cylinder #7 is a real bitc.
Give it a little wiggle!
You removed like two things
First
great video everything i needed to know nut i have to disagree i feel it was harder to do the passenger side lol