Thank you for your excellent videos, I have 2 registers connected and working but the text is only visible in full screen, when the screen is divided into cameras it does not work and I cannot see the text on the phone either, that is, in the application
Bench testing this on the DS-7308HUHI-K4 system using a DS-2CD2H86G2-IZS camera. Followed all the instructions on the video but still unable to see pos data from the NetAssist software on the screen. Is there something specific I need to do with the software to push through the data? Any help will be much appreciated. Thanks
Hi Matthew, with the net assist did you set the DVR IP address in there , and the port used matches the port in the POS setup? As well as the IP of the PC running net assist ?
Hello Daitech, You seem to have a good command of Hikvision equipment. I would be grateful if you could advise me how to overlay data onto the ANPR nvr screen from the serial output or usb output from my radar speed reading using POS I suppose?
yes technically you could output it as POS and then overlay this on the ANPR image , that should be simple enough to achieve providing you can get the output into TCP/IP from the radar?
Great video well done! I am a surveillance installer and have used several interfaces like VSI Pro and Gulfcoast software for capturing POS info on NVR. Do you know the specific settings needed to be entered on the HIK DS-7616NI-12/16P for an Aloha POS through its "spy port"? I have done one of these with Gulf Cost and it was over the network with multiple terminals. I will try the Epson setting and the rest as described in your video. Let me know if you of any additional info that would be helpful i have several of these to do for a restaurant chain.
Hi David and thanks for the kind words, I haven’t tried that POS setup actually so its hard to comment without taking a look , is there a emulator available for this setup?
Is there any way to change the font size and colour of the POS overlay "Transaction Information" as it is called in IVMS 4200? It is so tiny and you cannot see anything rendering it useless for remote viewing....
Great video. Is there a workaround IP solution if the tills are on a seperate network to the Nvr , for example the tills are often on a network used and controlled by the shops wholesale supplier.
Thank you for your excellent videos, I have 2 registers connected and working but the text is only visible in full screen, when the screen is divided into cameras it does not work and I cannot see the text on the phone either, that is, in the application
Hi, Do you know if the DS-7608NXI-K1 / 8P supports POS Overlay?
Hi on the parameter setting ip address is the till ip and what does the port number need to be ? System is setup but having trouble connecting pos
Great video Dave! Will the DS-7716NI-K4/16P do this? and are the transactions viewable over Hik-connect?
Hi and thanks , only I series or 73HUHI turbo and above currently mate , HIK-Connect App doesn’t yet support this mechanism
Bench testing this on the DS-7308HUHI-K4 system using a DS-2CD2H86G2-IZS camera. Followed all the instructions on the video but still unable to see pos data from the NetAssist software on the screen. Is there something specific I need to do with the software to push through the data? Any help will be much appreciated. Thanks
Hi Matthew, with the net assist did you set the DVR IP address in there , and the port used matches the port in the POS setup? As well as the IP of the PC running net assist ?
Hello Daitech, You seem to have a good command of Hikvision equipment. I would be grateful if you could advise me how to overlay data onto the ANPR nvr screen from the serial output or usb output from my radar speed reading using POS I suppose?
yes technically you could output it as POS and then overlay this on the ANPR image , that should be simple enough to achieve providing you can get the output into TCP/IP from the radar?
Great tutorial! One question how can i get the nvr to show the pos transaction when my client is viewing remotely on nvms7000!
Hi! Perfect review!
But what about the web interface for a playback? Can you do it? Or in the HCP CC playback?
for playback use 4200 or HIK-central , VS player can also show the info if needed 😊
Great video well done! I am a surveillance installer and have used several interfaces like VSI Pro and Gulfcoast software for capturing POS info on NVR. Do you know the specific settings needed to be entered on the HIK DS-7616NI-12/16P for an Aloha POS through its "spy port"? I have done one of these with Gulf Cost and it was over the network with multiple terminals. I will try the Epson setting and the rest as described in your video. Let me know if you of any additional info that would be helpful i have several of these to do for a restaurant chain.
Hi David and thanks for the kind words, I haven’t tried that POS setup actually so its hard to comment without taking a look , is there a emulator available for this setup?
Hi David, have you get the solution for the Aloha POS through it "spy port"? Peter
All the hikvision dvr have that option POS? I m using DS-7216HUHI-K2 i dont see the POS option how to enable it?
the 73 HUHI has this
Is there any way to change the font size and colour of the POS overlay "Transaction Information" as it is called in IVMS 4200? It is so tiny and you cannot see anything rendering it useless for remote viewing....
Great video.
Is there a workaround IP solution if the tills are on a seperate network to the Nvr , for example the tills are often on a network
used and controlled by the shops wholesale supplier.
we could use a 9000 series with 2 LAN ports , 1 for CCTV and 1 for Epos network , that is one way
If I want to run 3 tills on the till scan does the port stay the same on the 3 tills
Thanks
Kyle
Another great video by the master
Thanks for watching :)
Great g
I m from india bro
@@k.s.thiyaharajanrajan6458 we love both T-Series and Pewdiepie here - so you are in a good place :D
thanks Dave very helpful A++++
Thank you for the feedback 😀
What is the name of the software used as POS simulator?
Which Dvr model supports POS?
Hello, may I know what's the meaning of the Timeout option? How it works?
Quick Question what firmware are you running?
nshirani@hotmail.co.uk
DS-9632NI-I8 this is the model of the NVR
How Can i Check the printer Port??
Ringtone how embarrassing 🤣