I managed to update from V1, save a scene and edit a text file to make a scene that loaded like one of the six factory presets and didn't wipe the layer I'd recorded. What a wonderful update and excellent instuoctional videos. Thank you very much!
Just updated using Balena Etcher to burn the SSD, easy and exactly as described. Haven't even looked at the V2 manual or new overview video yet, but OMG, the engine sounds so smooth. Super excited to dig into this, V2 on Lubadh was orders of magnitude beyond anything I expected, so I'm prepared to have my mind blown yet again.
I was wondering if the USB Expension of the Lubadh can be used with the Arbhar? At this time there's no Arbhar Expension pack available on store, so I was thinking buying the Ludadh instead...
Amazing!! Thank you for all the hard work. Can't wait to try it. Just ordered my second arbhar too!! Is it possible to go back to V1 after going to V2 using the same method ? Really want to try V2 but I've a few live shows coming up and want to able to jump back just in case.
Thank you very much sir. Can you link this tutorial video on the website support page? It took me a while to find it, and I was expecting to find the instructions elsewhere. I first searched the manual, then the website, and I dug for a while across the website before I finally thought to try TH-cam.
When I go to the site and click "arbhar Firmware 2.0.2 (Latest Version) - For USB" I get a .gz file which balenaEtcher does not recognize. It says "missing partition table. It looks like this is not a bootable image." What's the correct way to get the firmware into Etcher?
Ahh, it seems like you can just click Continue and it will ignore that error. I haven't booted the module to see if it took, but Etcher didn't have any other problems. I thought about deleting my original reply, but figure someone else might run into the same issue.
Exciting! Arbhar is my favorite module. Where can I get the expansion pack? Do I have to buy a Lubadh v2 expansion pack? Or will there be Arbhar specific ones at dealers soon? Thanks!
Stock went to distribution weeks ago to ensure everything would be in stock in time for today :) Embargo officially lifted at 4:30PM (UK). In in doubt, send your preferred retailer a message and ask if they have it in and available.
great video! I followed all steps. copied the 2.0.2 onto the micro sd card and upated with belaetcher on osx. now when I plug in the card, the module keeps to stay in a mode where the leds are rotating endless and when I plug it back to the computer, my mac says it cant read the micro sd card anymore and I need to format 😞any ideas?
Only the 2.0.0 upgrade file is for the uSD card. All subsequent updates are done via USB. If you send us and email at info@instruomodular.com the support team will be happy to help :)
There is indeed! We only learned of the quirk on Tuesday. A patch has been getting tested and will be rolling out any day now. Be sure to email the support crew so you get a copy/instructions. info@instruomodular.com
Can we download the sound pack library somewhere for the V1 user and push into the original USB for free ? Or do we have to buy the expansion pack to have the USB library ? Thanks
We're doing the same thing as we did with the Lubadh expander. The sample library is a short term exclusive with the expansion pack and will then be published online for download. The expander is an entirely optional extra! But like the Lubadh expander, its sales are helping the creators as a short term boost. An incredible amount of work has gone into this update :)
From your preferred retailer. Embargo officially lifted at 4:30 PM (UK) but stores may or may not be on the ball with pushing pages live. Distribution of production stock started weeks ago to ensure they'd be in stores in plenty of time :) www.instruomodular.com/dealers/
It doesn’t exist yet. (I reference in the video that it’s an update for future viewers) I was being preemptive and covering the future procedure so I don’t need to remake this video down the line! :)
I successfully updated to v2.0 with the uSD card and balenaEtcher but the sample folders are empty on the USB drive. I have the Arbhar_v2_2-000_ExpansionPack.img file. Where does it go ? Thanks to you all for this amazing update !
@@instruo Yes. I followed the tutorial and it is in version v2.0. but the sample folders are empty on the USB drive. I see below that others have this same problem.
@@RobertCharlesMann what is your upgrade situation? Have you updated from V1 to V2 from the download? Or did you purchase an expansion pack? The sample library is only available with the expansion pack as a short term exclusive. It will be published in the future but at the moment it is a perk with the expansion pack purchase. The firmware update itself is completely free to all Arbhar users though!
No, they’ll be via the USB. The expander is an entirely optional extra, all it does is makes the USB port longer! Firmware is completely free to download and install from the website :)
@@instruo Cheers Jason, I'm gonna buy it anyway as you guys deserve a thank you for this update! Working my way through the video and all I can say is "thanks!!!" The Granular Delay mode is incredible. Cheers!!
It does not exist yet! The video demonstrating it is for humans of the future 🚀 I used CGI for the video to show the process as it will be for all updates following the V2.0.0 That section can be ignored at this time :)
@@instruo Yeah sorry, I bought the expansion pack and the firmware didn't update from the USB key so I was going to try and do it this way. What I just found out though is that in the box there's also a new SD card you have to install too with the firmware already flashed to it. It's all working now. Maybe there should be a note about that in the box :)
@@billB101 This video is the dedicated note :) In it I aimed to show what comes in the expansion packs as well as the situations and methods of updating. Glad you're up and running! If you have any suggestions for how this video could have been better curated, feedback is always appreciated.
Hi i tried updating from my v1 module. I made the procedure in the correct way (i think) but now is booting up for 15 minutes at least. is it normal? turning it off and restart during boot could damage the module in any way? thanks for the help and for this updates!
I’m not sure I understand what you’re describing. If you reach out through the website contact form, or directly to info@instruomodular.com the support team will be happy to help.
I also successfully updated to v2.0 but the sample folders are empty. I have the Arbhar_v2_2-000_ExpansionPack.img file. Where does it go ? Thanks to you all for this amazing update !
Love the professionalism and attention to detail with all the updates and videos, everything oozes 'Platinum Standards'.
I managed to update from V1, save a scene and edit a text file to make a scene that loaded like one of the six factory presets and didn't wipe the layer I'd recorded. What a wonderful update and excellent instuoctional videos. Thank you very much!
works perfect, thank you very much for the detailed and well explained video, much appreciated.
Thanks for this update, Arbhar is a great module!!
Just updated using Balena Etcher to burn the SSD, easy and exactly as described. Haven't even looked at the V2 manual or new overview video yet, but OMG, the engine sounds so smooth. Super excited to dig into this, V2 on Lubadh was orders of magnitude beyond anything I expected, so I'm prepared to have my mind blown yet again.
Thanks. I'm excited to try out the new features on V2.
I was wondering if the USB Expension of the Lubadh can be used with the Arbhar? At this time there's no Arbhar Expension pack available on store, so I was thinking buying the Ludadh instead...
Amazing!! Thank you for all the hard work. Can't wait to try it. Just ordered my second arbhar too!! Is it possible to go back to V1 after going to V2 using the same method ?
Really want to try V2 but I've a few live shows coming up and want to able to jump back just in case.
If you use a second uSD card you can swap them out and immediately go between V1 and V2 :)
Awesome, will do that, thanks @@instruo
Hello! thanks a lot for the support! should we keep the sd card after upgrading to last version on usb? grreeat modulleee!!
Thank you very much sir. Can you link this tutorial video on the website support page? It took me a while to find it, and I was expecting to find the instructions elsewhere. I first searched the manual, then the website, and I dug for a while across the website before I finally thought to try TH-cam.
Will do!
When I go to the site and click "arbhar Firmware 2.0.2 (Latest Version) - For USB" I get a .gz file which balenaEtcher does not recognize. It says "missing partition table. It looks like this is not a bootable image."
What's the correct way to get the firmware into Etcher?
Ahh, it seems like you can just click Continue and it will ignore that error. I haven't booted the module to see if it took, but Etcher didn't have any other problems.
I thought about deleting my original reply, but figure someone else might run into the same issue.
Is the factory sample libary live to download somewhere now? :-)
Exciting! Arbhar is my favorite module. Where can I get the expansion pack? Do I have to buy a Lubadh v2 expansion pack? Or will there be Arbhar specific ones at dealers soon? Thanks!
Stock went to distribution weeks ago to ensure everything would be in stock in time for today :)
Embargo officially lifted at 4:30PM (UK).
In in doubt, send your preferred retailer a message and ask if they have it in and available.
@@instruo Thanks! I'll have to follow up with the dealers I use.
great video! I followed all steps. copied the 2.0.2 onto the micro sd card and upated with belaetcher on osx. now when I plug in the card, the module keeps to stay in a mode where the leds are rotating endless and when I plug it back to the computer, my mac says it cant read the micro sd card anymore and I need to format 😞any ideas?
Only the 2.0.0 upgrade file is for the uSD card.
All subsequent updates are done via USB.
If you send us and email at info@instruomodular.com the support team will be happy to help :)
@@instruo ah thanks! I updated with 2.0 and it worked. thanks! I ll get the usb thingy from a friend.
@@faruambient Any USB drive can be used.
The modules ship with a black 4GB drive which will work for applying the update.
any new updates for those who had 1.5 arbhar units. is there a new up coming firmware fix?
There is indeed!
We only learned of the quirk on Tuesday. A patch has been getting tested and will be rolling out any day now.
Be sure to email the support crew so you get a copy/instructions.
info@instruomodular.com
Can we download the sound pack library somewhere for the V1 user and push into the original USB for free ? Or do we have to buy the expansion pack to have the USB library ?
Thanks
We're doing the same thing as we did with the Lubadh expander.
The sample library is a short term exclusive with the expansion pack and will then be published online for download.
The expander is an entirely optional extra!
But like the Lubadh expander, its sales are helping the creators as a short term boost.
An incredible amount of work has gone into this update :)
@@instruothanks for clarifying 🙏 and massive thanks for this huge update
Please describe where to buy the update pack
From your preferred retailer.
Embargo officially lifted at 4:30 PM (UK) but stores may or may not be on the ball with pushing pages live.
Distribution of production stock started weeks ago to ensure they'd be in stores in plenty of time :)
www.instruomodular.com/dealers/
I cant find the updater 2-0-1 on your webpage
It doesn’t exist yet. (I reference in the video that it’s an update for future viewers)
I was being preemptive and covering the future procedure so I don’t need to remake this video down the line! :)
Makes perfect sence, I got my 6 lights on so Im ready to granulate ! @@instruo
I successfully updated to v2.0 with the uSD card and balenaEtcher but the sample folders are empty on the USB drive. I have the Arbhar_v2_2-000_ExpansionPack.img file. Where does it go ? Thanks to you all for this amazing update !
Did you burn the .img file to the uSD card?
Our tech support crew will be happy to help!
info@instruomodular.com
@@instruo Yes. I followed the tutorial and it is in version v2.0. but the sample folders are empty on the USB drive. I see below that others have this same problem.
@@RobertCharlesMann what is your upgrade situation? Have you updated from V1 to V2 from the download? Or did you purchase an expansion pack?
The sample library is only available with the expansion pack as a short term exclusive.
It will be published in the future but at the moment it is a perk with the expansion pack purchase.
The firmware update itself is completely free to all Arbhar users though!
@@instruo Yes, understood. Thanks !!!
@@instruo I guess the file name including "ExpansionPack" is misleading.
Sorry if I misunderstood but did you say all future updates will only be via the expander?
No, they’ll be via the USB.
The expander is an entirely optional extra, all it does is makes the USB port longer!
Firmware is completely free to download and install from the website :)
@@instruo Cheers Jason, I'm gonna buy it anyway as you guys deserve a thank you for this update! Working my way through the video and all I can say is "thanks!!!" The Granular Delay mode is incredible. Cheers!!
@@james_44 thanks so much!! ❤️
There is no Arbhar USB firmware update 2.01 option on your site, has it been removed??
It does not exist yet!
The video demonstrating it is for humans of the future 🚀
I used CGI for the video to show the process as it will be for all updates following the V2.0.0
That section can be ignored at this time :)
@@instruo Yeah sorry, I bought the expansion pack and the firmware didn't update from the USB key so I was going to try and do it this way. What I just found out though is that in the box there's also a new SD card you have to install too with the firmware already flashed to it. It's all working now. Maybe there should be a note about that in the box :)
@@billB101 This video is the dedicated note :)
In it I aimed to show what comes in the expansion packs as well as the situations and methods of updating.
Glad you're up and running!
If you have any suggestions for how this video could have been better curated, feedback is always appreciated.
Hi i tried updating from my v1 module. I made the procedure in the correct way (i think) but now is booting up for 15 minutes at least. is it normal? turning it off and restart during boot could damage the module in any way? thanks for the help and for this updates!
Please feel free to send us a message through the website or at info@instruomodular.com
The tech support crew will be happy to help!
Im having a similar issue - sent an email through to Instruo
Flashing the sd card using the method on the video worked. All working now
Why won't my computer read the SD-card? I'm on a mac
I don’t know :)
Could be many factors.
Faulty card reader?
My Arbhar only went up to y when I pressed cap/shift. Has that got something to do with it? I've tried several readers
@@instruo
I’m not sure I understand what you’re describing.
If you reach out through the website contact form, or directly to info@instruomodular.com the support team will be happy to help.
Think the SD card broke at some point. Tried a new one, and it works like a charm @@instruo
From the v1 to v2 shall we just update the sd card and not the usb with the new firmware or shall update both?
Situation 2 is what you want.
There is only an SD card update (V2.0.0) I shot the video detailing the future method preemptively.
I updated the sd card and followed the process. But I checked the usb and saw at all the samples files are empty. Shall I redo the procedure ? Thanks
I also successfully updated to v2.0 but the sample folders are empty. I have the Arbhar_v2_2-000_ExpansionPack.img file. Where does it go ? Thanks to you all for this amazing update !
I suppose the firmware image is incorrectly named ExpansionPack but it's actually just the firmware?@@RobertCharlesMann
@@lucafrancinimusic You're very right.