Pioneer DMH-241EX - What's in the Box?
ฝัง
- เผยแพร่เมื่อ 22 มิ.ย. 2024
- In this Unboxing video, you'll learn about the Pioneer DMH-241EX AM/FM in-dash digital media receiver with built-in Bluetooth. What’s on the back panel and what’s in the box?
DMH-241EX
Contents of this video
0:00 Introduction
0:35 Unboxing Detail
2:17 Side View
2:33 Front Panel Detail
3:03 Back Panel Detail
4:00 Output Wire Harness Detail
4:36 Closing
You can find more videos about the Pioneer DMH-241EX in this You Tube playlist: • DMH-241EX
For more information about the Pioneer DMH-241EX check out: www.pioneerelectronics.com/PU...
You can find the Owner's Manual for Pioneer DMH-241EX here: www.pioneerelectronics.com/St...
Follow Pioneer on facebook / pioneernorthamerica
Join the conversation with Pioneer on Twitter / pioneerusa - ยานยนต์และพาหนะ
Works great
You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
Let’s say I have this DMH, no external amp, and a powered sub, like the TS-WX130DA or similar..
I adapt the RCAs from sub to the single sub connector as stated here in the video..
Now, will this DMH power 4 speakers still? Typically Pioneers are marketed to only do 2 fronts + whatever you chose rears (rear speakers, or sub)
This unit has the mono sub connector. Is this signal only, or does this also “power” the sub?
The Pioneer DMH-241EX has a built-in amplifier designed to operate up to 4 speakers in your vehicle. Typically this is 2 front speakers and 2 rear speakers. The DMH-241EX can be used to operate 4 speakers and use the RCA outputs to operate external amplifiers at the same time. No worries.
The connection used for the speakers is the bare wire pairs on the receiver wire harness, white, gray, purple, and green.
You can learn more about wiring your Pioneer receiver in this How To video from Pioneer: th-cam.com/video/-bF3uzzaT30/w-d-xo.html
The DMH-241EX also has RCA outputs. These are typically pairs of red and white jacks on the back of the receiver. You can see them here: th-cam.com/video/wNY7ydo1shs/w-d-xo.html RCA outputs are used to send an audio signal to an external amplifier like the one in the TS-WX130DA or another external amplifier with RCA inputs.
In a typical installation, an RCA cable of 10 to 15 feet length is used to connect the in-dash receiver RCA output to the external amplifier RCA input. This cable is typically a male to male RCA cable. The length of the cable may very depending upon your installation.
On the DMH-241EX, the subwoofer RCA output is a mono cable. And the TS-WX130DA has both Red and White RCA input connections. I recommend to use an RCA splitter or "Y" cable to make the audio connection to the TS-WX130DA simple.
Keep in mind you'll need a cable with a male connection at the in-dash receiver, and a male connection at the external amplifier.
The TS-WX130DA will require power and ground to operate. The TS-WX130DA is fused at only 10 Amps at the amplifier. Depending upon your installation, you may be able to directly connect the amplifier's power wire to your vehicle's fuse box for enough power to operate this amplifier.
If you can't connect the power wire to an open 10 amp circuit in the vehicle, you'll need to connect the amplifier power wire directly to the vehicle's battery.
You may have a long run from the battery to the amplifier.
A 12 gauge amplifier wire kit will work fine.
Be sure to properly fuse the amplifier power wire within 12 inches of the battery.
Be sure to make a proper solder and insulation or, other joining and insulation method with a clean connection between the amp kit wires and the Power and Ground wires at the amplifier. The system uses a Class D amplifier. This is a very power efficient design and is fused at only 10 amps at the amplifier. You can find more videos on Pioneer amplifiers here: th-cam.com/video/99Hfmc8QxVc/w-d-xo.html You can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
@@pioneerelectronics Thank you for the awesome and detailed reply
Is there a subwoofer output level adjustment in the settings? I can’t seem to find it :(
The Pioneer DMH-241EX does not have a subwoofer output level adjustment. There is a Bass Boost output control. If you set the subwoofer crossover LPF control to 80HZ only frequencies below 80 HZ will be played back by the subwoofer. The bass boost control frequencies below 80HZ.
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
What adapter do I need to integrate with my steering wheel controls? It’s a Hyundai Tucson IX35 2011
Many steering wheel control adapters are available. Here is one possibility: www.metraonline.com/part/AXSWC
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Can I use my existing backup camera with a RCA plug that is already ran to the front including a reverse gear trigger wire?
In most cases, a backup camera with a male RCA connection will work plugged into the Brown RCA Backup camera input on the in-dash receiver. You can see it here: th-cam.com/video/IQSjZcPDU6A/w-d-xo.html It's possible an adapter may be required.
The Violet/White wire on the Pioneer wire harness is the reverse gear trigger. You can learn more about wiring your Pioneer receiver in this How To video from Pioneer: th-cam.com/video/-bF3uzzaT30/w-d-xo.html
Here is a How to video about backup camera setup on Pioneer receivers: th-cam.com/video/tWi_kVPg2M4/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
Quick question if i want to run 3 amplifiers using this radio is there enough rca inputs to run all 3 plus the back up camera or that isn’t possible?
The Pioneer DMH-241EX has 3 RCA outputs for operating external amplifiers. Red and White for the Front. Red and White for the Rear. And a single black Subwoofer output. Please note: The Subwoofer output is a mono output. You can see it here: th-cam.com/video/wNY7ydo1shs/w-d-xo.html
I recommend getting a Y splitter for the Black subwoofer mono output. Many are available. Here is one possibility: www.crutchfield.com/p_703M22F/AudioQuest-FLX-X-RCA-Y-Adapter.html
The backup camera input is separate from the RCA outputs for the amplifiers. It's a brown RCA output. I recommend using the Pioneer ND-BC8 backup camera. You can see the unboxing video here: th-cam.com/video/kg0IaGC3JbE/w-d-xo.html You can buy one here: www.pioneerelectronics.com/PUSA/Car/Accessories/Rear-View-Cameras/ND-BC8
thank you so much 👍
i used a y splitter to adapt an external amp to the DMH-24ex single subwoofer output, but the subwoofer does not work. if i use the rear speaker RCA output to the external amp, the subwoofer works but not at its full potential. any advice would be great appreciated. (side note; Subwoofer/amp combo works fine with a different receiver in the same vehicle.)
Did you switch ON the subwoofer output in the Audio Menu?
Go to Setting>Audio Setting>Cutoff>Subwoofer LPF and switch it on to 80Hz.
You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
@@pioneerelectronics thank you!! worked like a charm. sounds great. thanks for your help.
I'll like it
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Does it show navigation once I plug in my iphone?
This isn't a simple yes, or no answer to your question. Please keep reading for the complete answer. The Pioneer DMH-241EX works with Weblink. And, when using Weblink, there are a few different navigation apps that are available for your phone that will show up on the in-dash receiver's display. You can get full turn by turn instruction from your phone through the in-dash receiver.
If you are referring to navigation with Apple CarPlay, or navigation with Android Auto, the answer is no, the DMH-241EX does not work with Apple CarPlay or Android Auto.
If you are looing to use Apple CarPlay or Android Auto navigation functions, please consider the Pioneer DMH-W4660NEX seen here: th-cam.com/video/B2TTfJUD-es/w-d-xo.html or the Pioneer DMH-WT8600NEX seen here: th-cam.com/video/QrvNkGgRo7E/w-d-xo.html
You can learn more about using Apple CarPlay on a Pioneer in-dash receiver here: th-cam.com/video/MkWffv3vB6Q/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Where is the radio bracket that slides on for dash install????
As you can see in the unboxing video, there is no metal sleeve included with the Pioneer DMH-241EX. This is because most modern vehicles don't require a metal install sleeve. Most modern vehicle's will use dash installation kit designed to fit the vehicle perfectly and also hold the new in-dash receiver. If your vehicle requires a metal install sleeve you can purchase one from Pioneer directly here: www.pioneerelectronics.com/PUSA/Car/Accessories/AV-Components/ADT-VA133
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Which back up camera can i use for this radio
I recommend the Pioneer ND-BC8 backup camera. You can see it here: th-cam.com/video/kg0IaGC3JbE/w-d-xo.html
You can buy one here: www.pioneerelectronics.com/PUSA/Car/Accessories/Rear-View-Cameras/ND-BC8
You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
Can I connect my android so that I can use Google maps (navigation)
I recommend to use Weblink for navigation on Pioneer DMH-241EX. You'll need to get the "Weblink Host" app on your phone. It's a free app. You can find it here: play.google.com/store/apps/details?id=com.abaltatech.wlhostapp&hl=en_US&gl=US
You can learn more about using Weblink Host in this How To video from Pioneer: th-cam.com/video/SQNnFQvqKoY/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
How can i put a photo from my phone to the radio as a wallpaper
The Pioneer DMH-241EX has a few factory wall paper options to choose from. I'm not aware of a way to put a custom background image onto this receiver. Pioneer makes many receivers that can have a custom background image. Please consider the Pioneer DMH-W4660NEX seen here: th-cam.com/video/B2TTfJUD-es/w-d-xo.html or the Pioneer DMH-WT7600NEX seen here: th-cam.com/video/O9yXjfuZPtM/w-d-xo.html and many others.
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Hooked mine all up and getting Audio through the door speakers but no sub output, it worked before I changed the radio and nothing has changed but I’m not getting any sub volume
What is the model number of your Pioneer in-dash receiver? Do you have RCA cables running from the in-dash receiver to your subwoofer amplifier?
Did you switch ON the receiver's subwoofer output?
If you have Pioneer DMH-241EX or similar,
From the home screen touch the gears for settings > and then the speaker for the audio settings. In the Audio Settings scroll down to "Cutoff" In the Cutoff Settings choose "Subwoofer LPF" Under Subwoofer LPF I recommend the 80 setting as a good starting point.
You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
@@pioneerelectronics yeah it’s this one the dmh-241ex and okay yeah I’ll give that a shot hopefully it work
@@pioneerelectronics nope that didn’t work
@@zacharyklingerman3429
Just to be clear, there is no subwoofer output unless you switch it on in the receiver's Cutoff settings.
Is your amplifier switching on with the receiver? How do you know? Is there a power LED?
Are your RCA cables good? I recommend to try new cables just to be sure. Cables sometimes fail.
Are you using one or two subwoofer RCA cables from the receiver to the amplifier?
Do you have the Blue/white wire from the receiver connected to the amplifier?
Please take a look at this video for wiring your Pioneer receiver: th-cam.com/video/-bF3uzzaT30/w-d-xo.html
I recommend to press the microprocessor reset button on the receiver. You'll find it beside the USB port.
@@pioneerelectronics yeah thats what I found weird cause my DMH-5500 has an on off but hey it works, yeah I got it all figured out thanks you guys, yeah amps all on and everything I just forgot to unplug the factory bass knob so I had two of them fighting each other
Does this have Apple CarPlay? Or can u install Apple carplay
The Pioneer DMH-241EX does not support Apple CarPlay. I'm not aware of a way to install Apple CarPlay on the Pioneer DMH-241EX.
Pioneer makes many different receivers that work with Apple CarPlay. Please consider the Pioneer DMH-W2770NEX seen here: th-cam.com/video/EO9U5vJ-NpY/w-d-xo.html
Or the Pioneer DMH-1500NEX seen here: th-cam.com/video/I1XFyRiTZKc/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Do you have to buy the back up camera separate?
The Pioneer DMH-241EX in-dash receiver is designed to work with the Pioneer ND-BC8 backup camera. The Pioneer ND-BC8 back up camera is sold separately. You can see an unboxing video for the Pioneer ND-BC8 camera here: th-cam.com/video/kg0IaGC3JbE/w-d-xo.html You can buy one here: www.pioneerelectronics.com/PUSA/Car/Accessories/Rear-View-Cameras/ND-BC8
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
How do you get this to play movies?
What is the model number of your Pioneer in-dash receiver?
If you have the Pioneer DMH-241EX, you can play videos while using the Web-Link app on your phone, or you can put your videos on a USB flash drive to play videos.
Search your app store for the Weblink Host app. Download and install the Weblink Host app on your phone. Connect your phone to the in-dash receiver with a USB cable.
You must have the parking brake engaged to watch video.
You’ll need to engage the vehicle’s Parking Brake in an ON-OFF-ON operation in order to access the video screen. This might also be known as the Hand Brake or the Emergency Brake. If you engage the vehicle’s Parking Brake and still can’t access the video screen, the in-dash receiver’s Green Parking Brake Wire may have an incorrect connection to vehicle.
You can see this on a similar receiver here: th-cam.com/video/7LU2GxhRGrQ/w-d-xo.html You can learn more about the Green Parking Brake Wire in this Pioneer How To video: th-cam.com/video/-bF3uzzaT30/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
What's the cost price 🤔
The Pioneer DMH-241EX is available from many Authorized Pioneer Dealers in the US. Here is one possibility: www.cartoys.com/pioneer-dmh-241ex
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Made in County??????
As of 2022 May, the Pioneer DMH-241EX is made in Thailand. This is clearly labeled on the product box and on the product chassis label, though may also be made in other regions at other times.
You can find a full playlist of How To videos from Pioneer about similar receivers here: th-cam.com/video/-bF3uzzaT30/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
By the way, the ?????? on your keyboard appears to be sticking.
@@pioneerelectronics thanks
@@pioneerelectronics "By the way, the ?????? on your keyboard appears to be sticking." HILARIOUS!
Is this good for subs that need 3000 watts RMS?
Please be more specific with your question.
You can't connect a subwoofer directly to the Pioneer DMH-241EX. Subwoofers connect to external amplifiers. Please consider the Pioneer GM-D9701 seen here: th-cam.com/video/6h3b_c3Yxnk/w-d-xo.html
The Amplifier gets it's signal from an in-dash receiver like the DMH-241EX.
Can you use the Pioneer DMH-241EX as the headunit in a system like this? Yes. And it will work well. However there may be better options like the DMH-W4660NEX seen here: th-cam.com/video/B2TTfJUD-es/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
@@pioneerelectronics awesome you answered my question. Just wanted to see if this unit will pair well with an amp pushing 3000w.