I had a client at one time said the computer would not work on the desk. So they set it on the floor. So when they called the asked for a longer power cord. I asked if the was something in the center of the cord. They said yes come to find out it was still tywrapped to gether in its origial packing. Had them cut the the tywrap and the said oh it now off the floor on able to place it on the desk. Thank you for your videos its helped a great deal.
I have question regarding to my machine. I have 3axis router machine as you have told very beautiful in your video how it works but as I switched x axis motion my rotary stepper motor pulse is not mach my x axis pulse rate so here is the problem that my x axis 1pulse =1mm but my rotary 1pulse is not equal to 1mm so in this case how I work for design.
So I have a question if this is possible with everything based on x axis could it be possible to do the same thing w the y axis because I have a shapeoko 3 so and unfortunately I'd be limited in the x axis but not in my y
Hi Roger, why I can't get to generate G-code in ArtCam with Y, Z & A axis?, ArtCam just generate X, Z & A axis although I wrap it in X or Y, it always generate X, Z & A, could you help me on this matter?, Do you have a vídeo regarding this matter?, Tks a lot in advance.
My dear @@rogerwebb9600, I am really happy for your reply. I am searching for local distributor for ArtCAM licence but did not found anyone. Please could you help me? I will be grateful to you.
In the name of the video you say "ArtCAM is NOT dead" but unfortunately AutoDesk published the news a week after you published this video that ArtCAM is indeed "DEAD". - Ouch!!! Now that news raises a few "ticklish" points: 1) AutoDesk looks like it has *very little loyalty toward their customers* who rely on specifically ArtCAM and they have simply dumped them "out in the cold" as it were. The headline on the official page reads "On February 7, 2018, Autodesk discontinued the sale of new subscriptions of Autodesk ArtCAM® software." It also says "Customers with an active subscription or maintenance plan can continue to get ArtCAM technical support from Autodesk until November 1, 2018." 2) One heck of a lot of your videos are now actually no longer all that helpful because you have been a great ambassador of AutoDesk and the ArtCAM package which is simply no longer available to anyone who is a "first time buyer". Yes, the people who already have ArtCam will probably still be able to carry on until the current license expires but then what? And what about the people who have not yet got the ArtCAM product? So what package are you and Pacific Tooling going to be suggesting that the people that purchase one of the Pacific Tooling machines to use in place of ArtCAM? But I suppose that the *Plus Point* is that we can look forward to a whole new series of videos from you about how to use whatever software you and Pacific Tooling are going to recommend now. I for one am going to be keeping an eye on this channel to find out what the replacement is going to be and how to use it. All the best and thanks for a great channel.
I had a client at one time said the computer would not work on the desk. So they set it on the floor. So when they called the asked for a longer power cord. I asked if the was something in the center of the cord. They said yes come to find out it was still tywrapped to gether in its origial packing. Had them cut the the tywrap and the said oh it now off the floor on able to place it on the desk. Thank you for your videos its helped a great deal.
Good work Roger!! Cheers from Uruguay.
Nice presentation
Good explanation , I liked the video ,waiting the next video to see the file working on a axis
my teacher, god bless you
Great, thanks.
I have question regarding to my machine. I have 3axis router machine as you have told very beautiful in your video how it works but as I switched x axis motion my rotary stepper motor pulse is not mach my x axis pulse rate so here is the problem that my x axis 1pulse =1mm but my rotary 1pulse is not equal to 1mm so in this case how I work for design.
Hi Shamit, have a look at my videos 225 and 227
Ok sir good one and really helpful 👌. But I have question regarding to my machine.
Yes, sure
So I have a question if this is possible with everything based on x axis could it be possible to do the same thing w the y axis because I have a shapeoko 3 so and unfortunately I'd be limited in the x axis but not in my y
Good work
long live roger sir
Hi Roger, why I can't get to generate G-code in ArtCam with Y, Z & A axis?, ArtCam just generate X, Z & A axis although I wrap it in X or Y, it always generate X, Z & A, could you help me on this matter?, Do you have a vídeo regarding this matter?, Tks a lot in advance.
Hi, you can use the X or the Y for the A 4th axis, you don't need A output to use the 4th axis.
@@rogerwebb9600 I will, tks a lot again.
Have you every thought about trying to cnc 3D images into concrete or plaster
Hello sir
How to save rotary/ring model in artcam 9
Thank you, for watching, Please like, subscribe and forward the video on to a friend, Roger Clyde Webb
roger.. can i do this in the maker
4 axis can only done at premium artcam?
Thank you, for watching,
Please like, subscribe and forward the video on to a friend, Roger Clyde Webb
is there any alternative for that software that is able to work with Mac ? artcam only works with windows :(
The simple answer is, go purchase a used /second-hand win 7 or 8 PC for $100 TO $200, this is what I do myself, problem solved
My manufacturer told me to take that much size of page for design I do and it mix up not giving good results.
Hallo guten Tag
Wie geht es innen , ergen wie vermiss man ihre videos.....
Grüße...
sir . I have only 3 relief clipart library in my artcam soft.
why ?
Go back to your distributor of ArtCAM, it should have 600+ unless it is a pirate copy
My dear @@rogerwebb9600, I am really happy for your reply. I am searching for local distributor for ArtCAM licence but did not found anyone. Please could you help me? I will be grateful to you.
bayım size minnetlerimi sunarım. Bize bilgi vermek için zaman ayırdığınız için teşekkürler
If I rotate my chuck then my controller shows 537.21mm for one revolution.
Hi Shamit, have a look at my videos 225 and 227.
I don't want to change my controller pulse every time.
I have 12 inch chuck diameter
Too Bad I cannot buy artcam 2018 :(
In the name of the video you say "ArtCAM is NOT dead" but unfortunately AutoDesk published the news a week after you published this video that ArtCAM is indeed "DEAD". - Ouch!!!
Now that news raises a few "ticklish" points:
1) AutoDesk looks like it has *very little loyalty toward their customers* who rely on specifically ArtCAM and they have simply dumped them "out in the cold" as it were.
The headline on the official page reads "On February 7, 2018, Autodesk discontinued the sale of new subscriptions of Autodesk ArtCAM® software."
It also says "Customers with an active subscription or maintenance plan can continue to get ArtCAM technical support from Autodesk until November 1, 2018."
2) One heck of a lot of your videos are now actually no longer all that helpful because you have been a great ambassador of AutoDesk and the ArtCAM package which is simply no longer available to anyone who is a "first time buyer".
Yes, the people who already have ArtCam will probably still be able to carry on until the current license expires but then what?
And what about the people who have not yet got the ArtCAM product?
So what package are you and Pacific Tooling going to be suggesting that the people that purchase one of the Pacific Tooling machines to use in place of ArtCAM?
But I suppose that the *Plus Point* is that we can look forward to a whole new series of videos from you about how to use whatever software you and Pacific Tooling are going to recommend now.
I for one am going to be keeping an eye on this channel to find out what the replacement is going to be and how to use it.
All the best and thanks for a great channel.
I"ll be back in OZ soon, see you then !!!???;-))
Australian Inventor Roger Clyde Webb