We Found a Unimog Minivan Swap! And Put it to the Test!
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2022
- Enter the ArcDriod CNC Plasma Cutter Giveaway www.grindhardplumbingco.com/ We found a Unimog we could afford! Ethan has been talking about buying this off road master forever and we finally did it! A 1960's Unimog with a Mazda minivan body and a propane swapped Ford engine.
In this video we monstertruck over a car, hooky-bob, do a top speed run and more!
Second Channel @Sent and Bent
Fan contact info
PO Box 2370
Sandpoint, ID 83864
USA
grindhardyewww[AT]gmail.com
For business or merch inquiries please contact products@grindhardplumbingco.com
Other inquiries grindhardplumbingco[AT]gmail.com - ยานยนต์และพาหนะ
ArcDroid CNC 🤖 giveaway here www.grindhardplumbingco.com
You should pin that ! 👍
Burning graphite under water with a Tig welder creates a gas that when captured and compressed like air can be stored like propane. It bonds the oxygen and hydrogen molecules together with the carbon. The inventor who tried to bring it to market back in the 90's in Florida even tried to sell the idea to NASA according to the videos I have seen. It was called Aquafuel by this guy and claimed it was ZERO point energy when setup properly. The gas that was created with electric till it was enough to run the generator and compressor then ran the gasoline powered generator putting out enough AC power to run BOTH and still made enough gas to fill the propane tanks. I don't know where to find this on Internet anymore. However Larry Rise from Missouri Renewable Energy Channel use to sell the videos at his energy fair's. May be able to get one still if any are still available. It shows the whole process. Easily replicated if you are able to get one of these videos. I don't know what happened to the inverter and where or why it never made it to market Other than it was SO easily replicated. He drove a mustang on the gas. And claimed that the only thing that exited the exhaust pipe was water. A truly green gas. The only reason I can think of that why the government didn't allow it was there is no way to meter or tax the gas created. Because again it's so easily replicated and no way to monitor the use. Inverter even explained how to make the gas from sewage water and claimed that all that was removed from the process was turned into carbon and could have more graphite made from the waste. ????? DEFINITELY worth looking into if you guys were to be witty enough to tackle such a task. Show us ALL how easy it is done... Be the change...
It use to be on TH-cam
Y’all should so use the old truck with the two piece windshield and step side and put it on that frame that would be so cool to see
Porsche Unimog....... Overlander...... Webasto heat inside...LPG powered.....
Yea, I just don't see a Porsche Unimog overlander on TH-cam anywhere........
What a sweet Mini-Monster.I think the Jag shell will remove most of the top heaviness,plus look way cooler.
I agree!
@@GrindHardPlumbingCo just make sure to slam that jag body real low on that frame! I trust your cutting skillz! :D
Hell yes! Jag by 4
@@GrindHardPlumbingCo Unleash the Jag-o-War!!
It's the mogster truck.
I think building a custom cab over would be the way to go. Three bucket seats wide, right up front and sitting high. Then the back could be another flatbed hauler or could be swapped out.
yes please
Agreed.
In other words make it a unimog? What’s unique about that…
@@DarcemanCRF300L well with the Grind Hard attention to detail it would come out looking amazing like their pickup they rebuilt and caged. And I counter what’s sooo amazing about a minivan or Jaguar body being on top? To me personally it’s cool for a minute but then my brain takes over and it’s just, meh. I’m more impressed by something more custom. Like Gingium’s adaptation of WRX driveline into a Miata. It wasn’t just empty the shell of the Miata and find a way to graft it onto a cut down WRX, he cut frame rails and built a tubular section to be able to mount the front subframe to. Just my 2 cents.
I though that as soon as I saw the combi sitting there.
I had a huge smile on my face watching you towing the BMW, but I have got to remind you lads that Unimogs are inherently dangerous. You need to think in terms of not falling through a side window when the Unimog rolls onto its side, so a proper roll cage (which will unfortunately make it even more top heavy) and four point harness. Probably best to accept that it won't go round corners fast. Several NZ Defense Force soldiers have been killed in Unimog accidents, and dozens injured. This is just in New Zealand! We love to see Ethan sending it, but we need him, and all of you, to stay safe.
Wider tires?
Jag up the Vanimog, that sounds like a wonderful idea, continue the legacy of the off road Jag. Some of the coolest vehicles out there are basically sports cars made to climb almost anything off road :P
That little red Jeep pickup would sure look sick on the Unimog, just saying. I like the Jag idea too, can't wait!!
That is awesome! I was going to suggest to cut channels in the body to drop it lower on the frame until I saw the idea with the Jag. That is going to be sweet. The lower you can keep the center of gravity the better!
The Vanimog needs a rollbar. I'm thinking the frame will crush the poor little van body on a roll. lol
have you seen the original body!? The van is probably safer, but stlll dangerous
@@lancerutherford3933 You're right, its a toss up. Haha
Yay save the jag that would be so cool. The jag also would be able to do off road stuff again. The legacy is too great to let die.
Agreed 100%
I have one of the newer FLU419 unimogs. like the one the neighbor had who had raced you, except mine is still fully outfited with the backhoe and front loader. The things these trucks will do without tipping over is INSANE. Ive done things fully built jeeps wouldn't do. these trucks are so amazing.
So hilarious when they were being pulled.... steering the wheel at first like they could steer where they were going.🤣🤣
Ya know, seeing the shot of the axle under the van, someone could build a badass off-road rig by taking the front axles from a compact tractor. My Mahindra 2310 has portal axles and hydraulic steering on the front axle. With two of those axles you would have 4 wheel steering and portals for a small vehicle
Its been done, at least for the front axle, low gearing and they steer really tight too.
What an awesome machine !! I would almost go with the VW bus since it has the same cab forward design as a unibog , probably be less fab work , but I know what ever y'all do will turn out awesome
The vw bus was rear engined
@@sean6992 thought the unibog was rear engine ? Looked like it would of been easier as far as the pedal set up as well though,
I've noticed the progress on the GC coupe happening in the background of the videos. Saw it had paint in this video, nice work, who ever is working on that thing.
Thanks man that really means a lot:) I just finished STI swapping it!
-Will
The one, and "only" mini van I would ever drive or be seen in. I look forward to the ensuing chaos!
There is no place a Mog can't go to. 😁
Drove these 404s in my Army days in the late eighties when they still were on active duty. They aren't the fastest but they can go literally everywhere. I can't wait to see what you guys will do with it.
Thats my old Unimog. Glad to see you putting it to fun use. You will find a remote to the stereo in the compartment below the stereo.
straight up livin the dream fellas!
Please create the JagMog!!! Although top heavy, that MazdaMog is quite amazing for the initial rides shown! Can't wait to see what it will become.
I love the video quality you guys are coming up with now congratulations!
That frame is literally just like my rc crawler! Portal axles,the steer links,everything! Thats bad ass!!
Man, I was cracking up when you were hauling the BMW shell all over the place. You guys have the best fun. Should have kept it for the fall fair and charged $25/ride LOL. Course the insurance would probably kill ya LOL.
I'd love to see a different body on that mog.....like a s10 cab-forward and a custom flat bed..sick with it records type shit
When it comes to having fun you guys definitely know how to do it, and that thing is one hell of a find! Can’t wait to see what you do with it but I know it’ll be good
Whatever it is ! great video guys!👍🏼🤩💪🏼
This is going to be amazing! The Jag body is going to be perfect! Go full Mad Max with it: matte black, nose down stance, huge tires, exhaust stacks with propane routed to the tips with spark plugs...
It lives, it dies, IT LIVES AGAIN!
Unreal. Looks like it has portal axles under it… Probably gear reduction in each hub… Can’t wait to see what y’all do with it! 👍
This could end up being one of the coolest builds you guys have done!
It needs a cab and bed that are split so they can flex with the frame. When you have a solid body you lose a significant amount of suspension articulation because the body is keeping the X frame from twisting like it is designed to do.
With some of agricultural tires that are as wide as they are tall, this thing would be pretty unstoppable. I think it's just too easy to tip and digs a little to easy when hung up on rocks
Yes, it would be unstoppable until the wheel bearings and portal hub bearings gave up prematurely, and without power steering, which these unimog 404's never had, it would also be unsteerable at low speeds.
@@fintan9705 you can't add hydraulic assist steering? It doesn't need to be street able. They rebuild the axles on monster trucks every show and these guys have replaced the ball joints in their tacoma more times than they'd like to remember
@@16driver16 yes there's always hydro assist, but rebuilding those portal hubs ain't cheap, if you're doin regular rebuilds you're gonna need deep pockets, for bearings and seals alone you're talking the best part of 500 bucks a hub.
Jaguar Uni-Mog is my vote. Even making up for the wheel base difference with the necessary fender clearance cut.
Brilliant idea definitely where I hope it goes. Plus there's a good chance Ethan's pedal box adaption won't just be holes in the firewall with pushrods, and that's a pretty exciting idea by itself.
Love to see you guys have some fun. You work so hard
Best content yall have had in awhile! Looks like I need to start watching the classifieds up north. IUda made the 8 hr drive ni a heartbeat if I'd seen that for sale.
it's trippy watching the van body go through the woods without seeing the chassi
That van-i-mog is WICKED cool and you guys can make it WAY better! Hopefully drop the body around the frame!
Always surprise me with the finds ..can't wait for this build n flip
I think using the jag for the body is a great idea; I love seeing an old build repurposed. But I was also eying that VW bus in the background and thinking that might also be a good candidate. It's already pretty beat up and I just think it would look awesome!
Love the builds, keep up the good work.
As a unimog ethusiast.... this is HERESY!!!! and yet so awesome
You guys never seem to have problems finding sweet deals. 👍
Most of you guys probably know this, but the weird drums on the front wheels are actually like makeshift winches when you get stuck. You put a rope through the holes and then just pull yourself out when the rope rolls up on the drum.
You guy's have way too much fun, love it!
You gotta build tracks for it. You'd be able to drive straight up a snowy mountain with that thing.
Sweet there's a guy near me with a wood grain sided 80's Chrysler mini van on a 78 bronco chassis with a 460 and 35 inch boggers you can't help but smile when you see it running around
Very cool rig, can’t wait to watch it become a Jag LOL!
That old ford truck in the background when you were looking at the jag would be perfect!
Wow
2 tanks !
That's is some real plumbing!
Nice work yall
Thats so funny i saw this on facebook marketplace. It even came with a trailer! glad you guys got it.
You guys should lower the jag so the body fits almost flush with the unimog wheels. So excited for this build!
The Mini-Mog !!! Craig is one of my best friends, I worked on that before, lol
Man, that thing works way better than it looks. I'm pleasantly surprised! The thing is siick!!!!
Just go bodiless. Put some seats and a roll cage on it and call it good. Maybe some sheet metal to protect the driver and passenger a bit and a window. If you did anything put some powerful lights a winch front and back.
This is the second time I tried to buy something only to get told it just sold.... Aaaaannnnndd then see it pop up on your channel 😂
Awesome addition to the fleet guys lol love it
Definitely a fan boys!! Glad you’re going with the jag body!
I'm 4 minutes in and this thing seems so, so badass. Most capable minivan I've ever seen.
I'm totally hyped for the "UNI-Jag" ... Lezzz go. 😝😝😝
Brownies looked exquisite 🔥🤣
See you guys at SEMA, that’s a winner for sure! Killer vid - thanks!
Are you going to be there
@@GrindHardPlumbingCo No, but I’d damn sure figure it out if you went!
That was a lot of fun to watch!
EARLY GANG!
Yes sir 🙏
New minivan is awesome dudes!!🤘🤘🤘👍👍👍
Been watching for over a year love you guys, you help me with bad days. Much love
If only it was a honda Odyssey body.
I want this weird ass thing, but the state forestry service would hate me 😆
Maybe keep the BMW to grade the driveway with?
You know your channel has made the big time on yt stats when you start getting the porn spammers. Next level up you get Madam Odwabae the love guru, and after that is "Elon Musk" "giving away" bitcoin for a small trade.
Looking forward to your mods on the Unimog.
That looks like a blast to drive, gotta love the wilderness of Idaho!
Loved the logic in removing the windscreen, then getting towed behind the monster mog!😂
I would love to see the "Mog-juar"👍 can't wait for it
Hell yeah I love those unimogs several years ago this guy wanted to trade one he had for my boat I said no at the time but I have wished I traded him more than once since.
Definitely the jag body, definitely have Josh out there to collaborate on this project🤘🤘
Yes to the jag! And the BMW body makes a nice road grader
Idk about the whole jag body swap but I see a red truck in the background!! That could be a cool swap and you guy's would grindhard the heck out of it to make it super cool. Food for thought...
That Mini Mog is great! 👌
i am literally in LOVE right now
DAMN that thing is sick. Love your guys work
This is the kinda content I live for👌
Propane Engine = Much cleaner emissions, cleaner oil/fewer oil changes, engine lifespan 2 to 3X longer due to much cleaner burning fuel source. Reminds me of those Russian UAZ 4x4 vans, I think they look cool sorta like a 4x4 VW bus. I'd add either a high top roof kit or maybe a pop up roof since it's already so tall & make an awesome 4x4 campervan.
Seeing cameras get yeeted off vehicles always makes me smile for some reason.
I always loved seeing that thing as I drove by, wanted it so bad
It is. Ery cool!
Another vote for the Jag here! I own a 404 too... Don't be afraid to Rev that M180... they like the R-pums ;)
By far that is the coolest vehicle you guys have ever bought can't wait to see what you guys do to it great show
this was a fun video to watch
9:34 that A-pillar though!!!!!!!!
can not wait for the jagg body!
Amazing video !!
How appropriate to have a MAZDA MPV Body mounted to a UNIMOG!
How about a late 1980's Extended Cab MAZDA B2300?
That would probably look better (with a Canopy), and be more "Utilitarian" depending on what you plan to do with it!
Just keep the MPV Body on it, it suits VERY WELL!
Now to see if y'all can get wider Wheels & Tires...
I just have one word-COOL!!!
Always exited for a new video!!
You guys are crazy, that was awesome getting pulled around in the BM'er. Lol
So much to love in this video.
Im excited to see more on this
That is crazy, you had me holding my breath twice when it almost rolled .
Heck yes, Jag rebody please! Such a cool build
I saw this for sale and I am so glad you guys bought it
i saw this on marketplace im not surprised you guys bought it
That Uni-Jag would be sick!
That thing is sweet and still say that you all are the ones having the most fun on TH-cam and I'd love to do what I love like you all and get paid for it.
Been waiting for this one after the livestream!
This thing needs wider wheels! I love the whole thing though!
an Exo Cage would look sick to ! Great find guy`s
Put that old orangeish truck on it! That'll be perfect :)