OOOOOOHHHHHHHHH my god you saved my day (2 days to be exact). I bought a air 2s for $500 on offer up and the gimbal was freaking out causing the drone to respond with several delays and the gimbal itself was just way off. I went through the entire downloading process a half dozen times+ over the past 2 days getting this error code on your youtube repeatdly. Needless to say i have about 8 hours left to start the return process on offer up, but because of your video it works perfectly. Thank you immensly!!!👍
the command 'py' is an alias. You can most probably run the command line properly by using 'python' in stead of 'py'. Since 'python --version' worked, this is your solution. No complex things about switching off things. Worked like a charm for me.
Thank You so much. In Polish language I had only info "Ni mo" and no sentences more. I have tried your recomendation and it is finally fixed. Thank You so so much. I would give you a beer if I would have the opportunity xDD God bless you :)
hi i’m having trouble with og service tool dji says wm231 not find some versions don’t have wm231 mavic air2 i have same drone you.did gimbal swap after crash camera not on yet it was on after crash we sure leads in ok had renew leads .im trying to follow youtube guy get correct dji firmware version for wm231 could you send link one you used please .🙏 😊
The issue I run into is that My gimbal moved a little to left and right and then started giving different line about "Progress Received 32 (And other numbered) Reports and then calibration time exceeded. Calibration must have ended. UNSURE.. That's what it said in CMD Prompt. Mine was for a SPARK Drone WM100..
@@sentosa_K Now I try almost 2 days for solutions, but still cannot. I try with many PC but cannot find any com ports, even I add legacy hardware from driver.
Im not sure If it is listed it should work. If not it will probably not work. I am simply showing what you should do if the python program will not work on your computer
I was unable to find Python in my app execution aliases to turn off as instructed in the video so I did what you said to change py to Python and it worked...Thanks!!
YOU ARE THE MAN!!!!!!!
DAYS of hoping I hadn't screwed something up and BOOM, I come across your video. Oh man, I CANNOT thank you enough 👍👍👍
OOOOOOHHHHHHHHH my god you saved my day (2 days to be exact). I bought a air 2s for $500 on offer up and the gimbal was freaking out causing the drone to respond with several delays and the gimbal itself was just way off. I went through the entire downloading process a half dozen times+ over the past 2 days getting this error code on your youtube repeatdly. Needless to say i have about 8 hours left to start the return process on offer up, but because of your video it works perfectly. Thank you immensly!!!👍
finally...omgshh, 3 days, uninstalled,re-installed everything, created new folder and still nothing!!! until you, my hero. Thanx sooo much man!!!!!
the command 'py' is an alias. You can most probably run the command line properly by using 'python' in stead of 'py'. Since 'python --version' worked, this is your solution. No complex things about switching off things. Worked like a charm for me.
Wow you the man!!!!!!! ... I was at this thing for 3 days and was about to threw the drone away and here you are saved the day THANK YOU
Thank You so much. In Polish language I had only info "Ni mo" and no sentences more. I have tried your recomendation and it is finally fixed. Thank You so so much. I would give you a beer if I would have the opportunity xDD God bless you :)
Awesome!! Thx a lot!! Anybody knows what is the code for mavic mini pro 3?
Мужик, тебе огромный ЛАЙК!!!
Take love and pray from my heart. My loard will bless you. I finding this solution what you provide in this video..🥰🥰🥰
Ola , sou do Brasil, é possível calibrar o sensor inferior após a troca? Obrigado Mavic 3
hi i’m having trouble with og service tool dji says wm231 not find some versions don’t have wm231 mavic air2 i have same drone you.did gimbal swap after crash camera not on yet it was on after crash we sure leads in ok had renew leads .im trying to follow youtube guy get correct dji firmware version for wm231 could you send link one you used please .🙏 😊
Thank you !❤❤❤
The issue I run into is that My gimbal moved a little to left and right and then started giving different line about "Progress Received 32 (And other numbered) Reports and then calibration time exceeded. Calibration must have ended. UNSURE.. That's what it said in CMD Prompt. Mine was for a SPARK Drone WM100..
are you running as administrator?
yes you must run as administrator
My mini 3 usb is detected as libusb-win32, there isnt com connection. Any ideas how to run the python without knowing the usb com?
Same problem, I did't see any com port, I try many way to get com port for mini 3 pro. you got solution?
@@nyanlone no i didnt find any :(
@@sentosa_K Now I try almost 2 days for solutions, but still cannot. I try with many PC but cannot find any com ports, even I add legacy hardware from driver.
❤❤❤
Does this work for mini 3 pro?
Im not sure If it is listed it should work. If not it will probably not work. I am simply showing what you should do if the python program will not work on your computer
Hey, I can't understand what path you exatly telling me to paste their. Please explain it to brief Dude.
Hola cómo puedo solucionar me sale todo bien pero me dice que no reconoce la solicitud al comando de calibración
mini 3 pro solution please !!!!!!!
You got solution? same here
Hello, I can do it remotely @@nyanlone
Just type Python instead of py. Thats it.
I was unable to find Python in my app execution aliases to turn off as instructed in the video so I did what you said to change py to Python and it worked...Thanks!!
@@shube3103 glad I could be of assistance!
WTF? "python" is installed, why are you trying to start "py" ? Change your command starting with py to python then all is good
Bro, you made a 1 minute video 10 minutes long. 😵