That’s awesome!! Well done. If you block the front suspension and use a few more pulleys you’ll get better lift and it will be more stable. Love the build!! 😃👍🏻
Love that Build! Nicely done! Improvement suggestion: Make the upper supports adjustable so you can tilt back (or froward) the fork tongues a bit so the heavy load is better supported, does not slip down or can pick up stuff on uneven ground?
Thanks so much for this video! I'm needing something like this for my pallet business. It's small enough to take up minimal space on my flatbed truck and trailer.
O veículo transformado em uma empilhadeira ficou dez gostaria de dar uma sugestão para está empilhadeira elevar uma carga de maior peso poderia por uma estrutura pesada na traseira do veículo para dar mais equilíbrio valeu
Obrigado pelo comentário, para pesos maiores seria necessário fortalecer toda a construção do veículo, o que demandaria muito tempo e dinheiro. Aproveitar!
I just ran across your demo video and you gave this link!! I've been needing to do something like this for my ATV. I don't need to lift/move anything that is really heavy! This would be such a great addition! How hard is it to attach/detach? (haven't watched the whole video yet)!
amigo so do brazil gostei de mais do seu trabalho meu sonho e ter uma empilhadeira trabalho com reciclagem quero comprar uma empilhadeira mais não tenho comdiçoes gostaria de montar uma com quadriciclo tam bem mais não tenho quadriciclo sei que er deficio americanos nos ajudar mais não custa tentar voce poderia me ajudar com um quadriciclo para eu trnas formar ele em uma empilhadeira
예수는 십자가에 피흘려 죽으시고 부활하셔서 그대의 죄와 사탄과 지옥 문제를 해결하셨습니다. 예수가 그대의 운명과 재앙과 미래 문제를 해결하셨습니다. 그대가 예수를 믿으면 마귀의 권세에서 벗어나 하나님의 자녀가 되며 천국의 모든 축복을 받아 누리게 됩니다. 예수를 믿고 영접하세요.
That’s awesome!! Well done. If you block the front suspension and use a few more pulleys you’ll get better lift and it will be more stable. Love the build!! 😃👍🏻
Great inspiration - going to attempt to build one for my Kawasaki Mule to move empty water tanks around. Thanks for posting
You're welcome! Go for it! 😉
Love that Build! Nicely done!
Improvement suggestion: Make the upper supports adjustable so you can tilt back (or froward) the fork tongues a bit so the heavy load is better supported, does not slip down or can pick up stuff on uneven ground?
Thanks so much for this video! I'm needing something like this for my pallet business. It's small enough to take up minimal space on my flatbed truck and trailer.
The idea is there, go for realization. Cheers! 😀😀
That's absolutely what I've looked for so long. Thank you very much!!! :)
You're welcome! 😉
Such a detailed video. Thank you so much, it will be a great help for my project work.
Einfach nur sau geil!!! 😂 Richtig gut gemacht! 👍
Nice idea. Try turning your heat up on your welder
Awesome build!!! Could I get the materials list from you..?
Hot damm I got to build me one of those for my four wheeler great videos
Of course, go for it! 👍👍
This is really cool! keep it up man!
GREAT JOB!!
Thank you! 👋
Merry Christmas to You & Your Family! I hope you have a Happy, Healthy, Safe and Prosperous New Year!!
Thank you too! I wish you all the best! 🖐
There really should be a standard for forks on these smaller machines.
I was wondering if you would have to do anything with the suspension..!?? And you did! The new shocks don't even sag when you tested it!!
It was an option for a harder suspension, or eliminate it, and fix the metal bar. 😀
Have you done any tests with how much counterbalance is needed when you raise it... obviously more is needed with heavier weights! I LOVE this!
I used a 70kg (154 pounds) counterweight, and I successfully lifted 220kg (485 pounds). 😀
Sehr gut gelungen👍
Danke! 🖐
@@project_basement6178 🖐
O veículo transformado em uma empilhadeira ficou dez gostaria de dar uma sugestão para está empilhadeira elevar uma carga de maior peso poderia por uma estrutura pesada na traseira do veículo para dar mais equilíbrio valeu
Obrigado pelo comentário, para pesos maiores seria necessário fortalecer toda a construção do veículo, o que demandaria muito tempo e dinheiro. Aproveitar!
How much have you been able to lift with it? Have you added any weigh to back to balance?
Grande 💪💪💪💪🤟🏻
Отличная штука это погрузчик но не для этого же велосипеда😮 хотя бы на минитрактор на заднюю навеску для наклонов 😅
Muito bom parabéns 👍🙏👏
What are the individual measurements of the pieces?
Approximately 2m (6.5 feet) high and 90cm (35.5 inches) wide. 👍
I noticed your forks slide on and off...great design... wish I could see them closer!??
The video was shot for inspiration, I don't have a draft and dimensions of a forklift either. 😆😆
I wonder if you would of put a FULL FRAME instead just the front
It would cost me too much, but it would definitely give me more lift weight. 😀
I just ran across your demo video and you gave this link!! I've been needing to do something like this for my ATV. I don't need to lift/move anything that is really heavy! This would be such a great addition! How hard is it to attach/detach? (haven't watched the whole video yet)!
It is very easy to attach, one main bolt on under site, and 2 bolts on upper site of frame. 👍
Put a pallet on the forks and you can safely clean your gutters with no ladder!!
I will definitely give it a try. 😉
👏🏻👏🏻👏🏻👏🏻
I'd like one to lift one ton (1000 kilo) about 4 feet high (1 meter). To load and unload stuff from a pickup or trailer.
25:05 more zetor
You can hire me to be cameramen
A tripod is the best option for now. 😂
how many kilos can he lift without problems
I could care less about that jazz info. Post what size of winch being used. Video didn't show it even being hooked up.
A standard winch, 12V 1380kg (3000 pounds) missed that part. 🤨😊
Off road forklift it's very expensive 😃
But also very useful ! 😀
@@project_basement6178 😁😁ofcourse, alot place normal forklift cant go
amigo so do brazil gostei de mais do seu trabalho meu sonho e ter uma empilhadeira trabalho com reciclagem quero comprar uma empilhadeira mais não tenho comdiçoes gostaria de montar uma com quadriciclo tam bem mais não tenho quadriciclo sei que er deficio americanos nos ajudar mais não custa tentar voce poderia me ajudar com um quadriciclo para eu trnas formar ele em uma empilhadeira
Is just lift when something like this man 70kg + is meter of lifting and drive.
예수는 십자가에 피흘려 죽으시고 부활하셔서 그대의 죄와 사탄과 지옥 문제를 해결하셨습니다. 예수가 그대의 운명과 재앙과 미래
문제를 해결하셨습니다. 그대가 예수를 믿으면 마귀의 권세에서 벗어나 하나님의 자녀가 되며 천국의 모든 축복을 받아 누리게 됩니다. 예수를 믿고 영접하세요.
What's with the poofy gloves?