Lemax The Spinning Snow Flake Repair

Lemax The Spinning Snow Flake Repair, a long repair, but it is functional now. Almost all the issues were caused by the gear in the base breaking the alignment stud.
Paid links:
28 Gauge 2 Strand Wire - amzn.to/3RFTm3l
11400 RPM Motor - amzn.to/3XGa3eH
Gorilla Spray Adhesive - amzn.to/45ogis5
www.RandomJunkChannel.com
Facebook:
/ randomjchannel
Gmail:
[e-mail]
Thirsty? Try Coffee Brand Coffee
coffeebrandcof...
TH-cam:
• 2020 Halloween House G...
Tik-Tok:
tiktok.com/@randomjchannel
Etsy:
www.etsy.com/s...
Tee Spring:
teespring.com/...
Twitter:
/ channel_junk

[@rosanna7481]

Yes, yes I did stay for the whole thing. Learned a lot. Plan to watch again before giving this a try. Thank you.

[@windyacresway]

For the price,these rides break easily in my opinion.Great detailed video.

[@RandomJunkChannel]

They do.

[@davidscott3647]

This helped me fix a disconnected power wire in the base. Great video, although long, very thorough.

[@RandomJunkChannel]

It is long, it was a very long repair. I am happy to here it helped you

[@rogerdonnelly8327]

wow - that was some project!

[@clarencereed7423]

Awesome on the repair . this piece on my want list once I find decent price

[@lexygirl4925]

If u can get too city lights , a Christmas store in San Diego. They have two in the as -is section each for 25$. Add this video , your good to go. If your really lucky sometimes the box is messed up, and that’s it, for 25 bucks. No warrenty

[@EDP1]

nice job .

[@Dug2010]

Great video. Helped get everything working here except the optical sensor. Any words of wisdom on resetting it?

[@RandomJunkChannel]

Set everything to the neutral or start position. Place the optical plate in the center where it aligns with the mounts and it should reset. What is it doing?

[@Dug2010]

I'll try that. It is quickly turning off with the switch and not resetting to center. I put a volt meter on the sensor and am getting power when the bar crosses between the poles.

[@RandomJunkChannel]

Start at center and you should have no voltage. Are the gear mounts broken like this one?

[@Dug2010]

The mount was broken and repaired like you showed in the video. Having some board problems not getting power to some of the lights also. Voltage on the green/black wires from the sensor is zero when set to middle.

[@RandomJunkChannel]

You probably have sheared wires in the arm causing light failure.
Zero volts is correct at its starting position.

[@markgruber2257]

I just purchased a roll of 2 strand magnet wire that would have been perfect here and I was thinking super glue also

[@jcarr1289]

I have a lemax vickis cattery. The sound doesnt work (which i am OK with) but it doesnt do its flashing lightening effect. Most of the static purple and orange lights work but one or two are out. Do you have a recommendation what I should do to get the lights working?

[@RandomJunkChannel]

Sounds like the board has failed. If it is repairable, broken wires, bad component, etc., a custom circuit could be made that would allow the lighting to work as close to OEM as possible

[@jayhuskey2280]

Hey! Do take repair jobs? I've got a Wheel of Horror that just kind of died on me last year.

[@RandomJunkChannel]

Yes, email [e-mail] with any info on what happened or what it does, if anything, when you turn it on.