Cromwell publishing will reprint old reloading manuals and 6000 other hunting books and publications, 5 on P.O.Ackley. I had them Reprint and old Lyman manual from 1970. I was needing 9mm 158 grain for subsonic loads.
Thanks Wade for all you do brother, Its cold up here in North Carolina too but I put together some of these 10 pellet loads in MG 42 wads and snuck out to try them out awesome performance thanks again👍👍
Thank You for your insight and information. I have old 2000 Alliant powder catolog that has 3" load data, 1 5/8 0z load that I use for turkey. Speed and load weigh are perfect for this job with #4 shot. And I can't say enough about your 1-8 buck and ball load for hog hunting.
Thank You Wade! Really enjoy your work! You bet I’ve tried some of those “Wade Recommended” loads ! Dang if they didn’t shoot wonderful out of my 870’s! Wow ! Keep them coming , never get tired of them !
I'm sure glad you showed your data book. I have the exact book. First thing I bought as a new shotshell loader. Sure wish I lived closer to you I'd love to meet you shake your hand and attend the b.r.o school of shotshell for a day. I'm in south Alabama its been colder than normal here as well.
@BubbaRountreeOutdoors bo I tell ya what I'm lovin it. All December long I was complaining about it being hot and BAM! outta no where we got slammed with 8 inches of snow 😁.
The 10 X 00-Buck with CB-1138, buffer, and LS is an excellent general purpose load. Could you make it better in your gun, or make an overall better load by fiddling around with stuff??? Absolutely you can. But, if you're new, or just don't want to fiddle with stuff, It's an excellent go-to load.
I just put together a few of your buckshot loads using those wads and Blue Dot. But due to the hellish climate out here on the eastern edge of 'Deadliest Catch' land, I haven't had a decent day for testing yet.
The currently available wads that are available are having fit issues with some of the newer available powders. The powder companies are dropping the ball with flat spherical powders for shotgun loads. It was already tried up to 60 years ago, hence majority of shotgun powders were flake powder. Its sad the new ideas new people have they don't do the history first.
Hey Wade, Great channel! I just subscribed to your channel. I am curious if you or any of your club members have found a great 50+ yd load for coyotes using a 950 Ultimag? I'm thinking something with relatively tight dense pattern but open to your suggestions. Thanks!
Hey Wade!
The rocksalt load worked out great.
Thanks for the help, brother.
@@76_138 awesome!!
Great stuff, I have been following you for years. Have loaded many of your recipes.
Been saying this a long time now.
Thanks for making this vid.
Cromwell publishing will reprint old reloading manuals and 6000 other hunting books and publications, 5 on P.O.Ackley. I had them Reprint and old Lyman manual from 1970. I was needing 9mm 158 grain for subsonic loads.
👍
Awesome video I look forward to watching your videos very useful information
Thanks Wade for all you do brother, Its cold up here in North Carolina too but I put together some of these 10 pellet loads in MG 42 wads and snuck out to try them out awesome performance thanks again👍👍
Nice video thanks for your knowledge of hand loading
Thank You for your insight and information. I have old 2000 Alliant powder catolog that has 3" load data, 1 5/8 0z load that I use for turkey. Speed and load weigh are perfect for this job with #4 shot. And I can't say enough about your 1-8 buck and ball load for hog hunting.
Hey, do you think there is a chance you can post that recipe for the #4 turkey load? I’m trying to get one together for my spring season coming up.
Thank you Wade !
Thank You Wade! Really enjoy your work! You bet I’ve tried some of those “Wade Recommended” loads ! Dang if they didn’t shoot wonderful out of my 870’s! Wow ! Keep them coming , never get tired of them !
I'm sure glad you showed your data book. I have the exact book. First thing I bought as a new shotshell loader. Sure wish I lived closer to you I'd love to meet you shake your hand and attend the b.r.o school of shotshell for a day. I'm in south Alabama its been colder than normal here as well.
@@charlesfields7908 lol! 😂 yessir! It's way too cold here in the south ain't it?
@BubbaRountreeOutdoors bo I tell ya what I'm lovin it. All December long I was complaining about it being hot and BAM! outta no where we got slammed with 8 inches of snow 😁.
The 10 X 00-Buck with CB-1138, buffer, and LS is an excellent general purpose load. Could you make it better in your gun, or make an overall better load by fiddling around with stuff??? Absolutely you can. But, if you're new, or just don't want to fiddle with stuff, It's an excellent go-to load.
@@joearledge that's a fact!
@@BubbaRountreeOutdoors We have YOU to thank for it, so Thank You Sir.
I just put together a few of your buckshot loads using those wads and Blue Dot. But due to the hellish climate out here on the eastern edge of 'Deadliest Catch' land, I haven't had a decent day for testing yet.
if you could only have one gaep roll crimper for finishing fold crimps and roll crimping which would you choose?
@@barbarareese2745 if I had to have 1 Gaep to do it all, I would say the BN3. if that 1 wasn't available, it would be the OTP.
MEC has a good Manual to especially if you have an Old Antique with a 2 inch chamber .
The currently available wads that are available are having fit issues with some of the newer available powders. The powder companies are dropping the ball with flat spherical powders for shotgun loads. It was already tried up to 60 years ago, hence majority of shotgun powders were flake powder. Its sad the new ideas new people have they don't do the history first.
Is there any other HULL data I can use for the Remington slugger hulls, aka 2.75” aka Remington plastic hunting cases w 1/4” base was?
@@pugamusmaximus yes. The Remington Gun Club data should work!
Are Gary's pushers magnetic
@@JeremyMcCreary-ib7wo yessir!
Hey Wade, Great channel! I just subscribed to your channel. I am curious if you or any of your club members have found a great 50+ yd load for coyotes using a 950 Ultimag? I'm thinking something with relatively tight dense pattern but open to your suggestions. Thanks!
@@johnnybarbar7435 yessir! Go to the channel and search out Coyote loads.
hey wade, can you tell me what would be a good factory buckshot 3in load for a 20 ga.
@@OldGreyCountryboy rt now it would be any that you can find! Some of the best performers that I've tested are the Federal 3" 18 pellet #2 buck.
@@BubbaRountreeOutdoors got some #3 and #4 and can get more but are only 2 3/4 cant find 3 in
@OldGreyCountryboy yeah, that's the biggest problem. Can't find the stuff!