How to change rear brake discs and brake pads on FORD FOCUS 2 [TUTORIAL AUTODOC]

How to change rear brake discs / brake rotors and brake pads / brake pad set on FORD FOCUS 2 Hatchback 07.2004-09.2012 [TUTORIAL AUTODOC]
🔝 Top brands that produce brake discs and brake pads: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co...
Brake discs: www.autodoc.co...
Brake discs for FORD FOCUS 2: www.autodoc.co...
Brake pads: www.autodoc.co...
Brake pads for FORD FOCUS 2: www.autodoc.co...
All video and pdf tutorials on FORD FOCUS 2 parts replacement: download and watch at AUTODOC CLUB - club.autodoc.c...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ www.youtube.co...
0:51 - Use a simple screwdriver to take brake caliper spring out
1:20 - Use an end bit №7
2:32 - Use a socket №13
3:36 - Treat the brake disc seat with a special copper grease
4:56 - Using a special tool press in the brake caliper piston
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► FORD car repair tutorial - • FORD car repair tutori...
► FORD FOCUS 2 car repair tutorial - • FORD FOCUS MK2 car rep...
► How to replace rear springs / rear coil springs on FORD FOCUS 2 (DA) - • How to change rear spr...
► How to replace rear suspension arm / rear control arm on FORD FOCUS 2 (DA) - • How to change rear sus...
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
TH-cam: / autodocuk
Instagram: / autodoc_autoparts
Snapchat: / autodoc.uk
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2019 AUTODOC GmbH All rights reserved

[@нищонищов]

One of the best car tutorials on youtube, hands down. Simple and down to the point. Very well done!

[@autodocuk]

Thank you for your feedback!
We are glad to know this tutorial was useful to you.
Stay tuned for more! Best regards, Autodoc team!

[@Impetuss]

In the Haynes book it recommends to clamp the brake line and open the bleed nipple when pushing the piston back

[@Golo1949]

I noticed that, and didnt torque the bolts.

[@jim-stacy]

I just bled the nipple and topped up the reservoir. The biggest thing is don't buy a cheap piston wording tool! Bendy

[@skaaningdk1987]

Nice video! What are torque setting for the two bolts holding the calliper arm?

[@skaaningdk1987]

Or maybe it’s called calliper holder, sorry for bad english…

[@enij7723]

70 Nm for de caliper arm bolts. 35 Nm for de guide pins. Source: Workshop Manual Ford Focus 2008.

[@stuartdavis2789]

Great simple video, thanks.

[@autodocuk]

Thank you for your feedback!
We are glad to know this tutorial was useful to you.
Stay tuned for more!
Best regards,
Autodoc team!

[@FordForTheWin]

Oh look how clean those carrier bolts are lol mine are round with rust damn it lol

[@nikowest9459]

Nice job, can you tell me the name of the silicone paste? please.

[@autodocuk]

In this case, we used 7607 A.B.S.
AUTODOC

[@danielbates3624]

What a brilliant video,so clearly to see how the work is done,,can you change mine for me please,he he, fantastic job,,

[@autodocuk]

Thanks for your positive comment! Stay with us!
AUTODOC

[@hankpb1]

what size is end bit number 7? ..I've tried 7mm too big on mine.. thanks

[@autodocuk]

You can find this information in your vehicle's repair manual.

[@SuperTAmbro]

Is this procedure the same for a 2010 Ford Focus XR-5?

[@autodocuk]

In general, the replacement will be similar, the only thing that may be slightly different is the design features of your car. More accurate information can be obtained in the technical documentation for the car or by contacting the service
AUTODOC

[@asifkhattak100]

Do you have a workshop in east london ?

[@autodocuk]

We are based in Germany in Berlin.
Please find all information about us by the link:
www.autodoc.co.uk/services/company
AUTODOC

[@johnd149]

Could you do rear drum brakes ?? Thanks

[@autodocuk]

Thank you for your comment.
Stay tuned for updates on our channel, the video you are interested in will definitely appear.
Best Regards,
Autodoc team

[@kamilcisu5333]

thanks

[@UKbydrone]

Ok so no lubrication on the ears of the pads, carrier not cleaned and neither the carrier or caliper have been torqued to any specification.

[@981moro]

Give it two ooga boogas and when it cracks wind it a bit back xD

[@terry.chootiyaa]

*WHEN IS COMPETITION TIME ? 👍*

[@autodocuk]

Thank you for your comment.
Please stay tuned with our channel and follow our news and videos coming soon.
Best Regards,
Autodoc team

[@yesorno8967]

sher toll