Hello just finally got it today !! After few days of no working ,Even if i followed every step of this video, i just Forgot to Twist the two little cable of the original switch start/stop of the tone arm that we cut … just twist cables or put a crimp if you have that … and it finally works !!!! And this is cool because i didn’t find my mistake since One week ……. !! 🛟🥺🥺😅😅
Hello master, I have a pt01 scratch it doesn't turn on. It could be the jack input that is loose from the Board, for that reason it does not turn on. I'll try soldering it loose... Greetings from Chile
I bought your arcade button kit with the relay, followed all the steps in the videos, and it worked a few times, but not at all anymore..? what can I possibly have done wrong, and what can I do to make it work properly? because it works some times, and then it stops working... then I lift up one side of the Numark so it's almost tilted over, and then it works a few times... then doesn't work again. it's kinda frustrating.. plz reply.
What’s the difference between the analog and digital button? And do both start and stop button without moving the tonearm? Asking because this would be a good mod for the Phase DJ.
I had the same problem and it was because I had forgotten to crimp/twist together the wires from the OG tone arm switch. Once I did that it started working :)
That's Sids hands 🤙
Lucas Maynes haha omg good eye that totally is
That must kill tatoo
Right on man nailed it.. now to take that step drill bit back to the Home Cheapo $45!!!!
I know I am kinda off topic but do anybody know of a good site to stream new tv shows online?
@Jeffrey Onyx i use Flixzone. You can find it on google :)
@Jeffrey Onyx I watch on FlixZone. You can find it on google =)
Hello just finally got it today !! After few days of no working ,Even if i followed every step of this video, i just Forgot to Twist the two little cable of the original switch start/stop of the tone arm that we cut … just twist cables or put a crimp if you have that … and it finally works !!!! And this is cool because i didn’t find my mistake since One week ……. !! 🛟🥺🥺😅😅
I need one of those dope upgrade awesome video
why the open hole at the fader in the cover at 0:54
Hello master, I have a pt01 scratch it doesn't turn on. It could be the jack input that is loose from the Board, for that reason it does not turn on. I'll try soldering it loose... Greetings from Chile
I bought your arcade button kit with the relay, followed all the steps in the videos, and it worked a few times, but not at all anymore..? what can I possibly have done wrong, and what can I do to make it work properly? because it works some times, and then it stops working... then I lift up one side of the Numark so it's almost tilted over, and then it works a few times... then doesn't work again. it's kinda frustrating.. plz reply.
In the same boat man, looking for some FAQ's about the chip/button failing
Me too , the motor it’s on and the button don’t do nothing any support please
Will I still be able to play 12 in. Records? Thanks in advance, just got the jdd contactless fader.
What’s the difference between the analog and digital button?
And do both start and stop button without moving the tonearm? Asking because this would be a good mod for the Phase DJ.
Would this mod work with the ion iPT01 as well?
I lost my smash crimp conektor 😩 what to do?
I did the same hahaha I'm gonna see if I can't suss a replacement somewhere
Nice . Is there a way to add a pitch?
I installed exactly as described and my button is not working
you must remove the original start/stop, the little black plastic piece under the arm ;)
I had the same problem and it was because I had forgotten to crimp/twist together the wires from the OG tone arm switch. Once I did that it started working :)
What about the ground install for the JDDDSSB V2 ? It doesnt show that step . Unless it’s the same as V1 ?
Same grounding procedure as the V1
How can you tell which version turntable you have
can i disconnect the fader switch and replace it with JDD start/stop button???
Damn dog! Yall need to include a lil tool kit with every purchase 🤦♂️
Definition of frustrating! 🤬
I dunno, man - if you don't get that this is kinda DIY stuff it might not be your cup of tea.