Beautiful attention to detail. The fillet on the corners gives the whole thing a more continuous flow and I like the inset stone piece in the top instead of just putting it on top of the frame.
Thank you for this video, you are the only one on youtube which given dimensions for making this cube table, it's also nice that with animation art, you are the best brother, thanks again. 👍👍👍
Buddy if you are going to build same size with 40 mm square pipe only then it's going to useful. I suggest you to first make a bend on scrap piece of pipe that will give you much better clear vision about this joint.
It’s beautiful and contemporary, it would be equally at home at a high end restaurant or bar as in any home. You do a great job of presenting the videos and explaining everything. One day I going to make a 'river table' with a live edge and epoxy top, I was going to go for industrial legs but I’ve now changed my mind. I know it’s almost an impossible question to ask as there are many variables but is this a good weight bearing design please? I’m also a keen bird watcher though I don’t get out much these days, was that a member of the starling family? Another great video, you are a very talented man.
Thanks Mark, as far as the weight bearing capacity is concerned there are two points in this table where you can use blocks and increase its weight bearing capacity. During the starting of this build I wanted to be kept it a show piece, but simillar design can be use to bear a weight of 100 -130kg if you install support blocks onto those two positions. You can use acrylic blocks if you don't want them visible. I saw a video in which the maker uses acrylic rod to prevent the whole wooden cube from collapsing.
Great torurial Still have 2 questions 1. Does somebody know how much a table like this can approximately hold. 2. Does the table react like a kind of spring when you put a heavy object onto it?
Thanks, there is an area in this table where if you add a transparent acrylic than weight carring capacity increase around 100-120 kg which I tested, without that around 20kg without any deflection and upto 30 deflect downward about ⅛". So if you want to bear heavy stuff just add some transparent acrylic in that way it's contain it's theme and still seems clean in look.
@@ambroscustom whoah, thanks for the quick reaction. Just to be sure: I am assuming the acrylic is between the top and the pipes just below it, and between the buttom pipes and the pipes just above that, correct?
Infinity Cube Table I am in high school first year. I'm curious to know how long this would take.I am very interested in this and I want to build one myself. If possible I would like to know the exact size of it. How long all the pipes would need to be and also what are the measurements of what was 3D printed? I know this looks will probly not be replied to but I really like this stuff
Normally you can put 20kg on the table. If you add a member underneath the overhanging side then it's as strong as normal table. It's better to use acrylic piece as a supporting member. For normal coffee table you don't need any support
Hahahahaha..........thanks pal for the generous words and offer. My current goal was something else rather than doing a business but if I have to do business then surely think about your offer in nearby future. Thanks for being here:)
@@ambroscustom how long did this take? My metal class period is only time I can work on it and it starts at 955 and ends at 1045. So I have feeling this will take a while for me
@@ambroscustom my teacher needs me to draw the top front and right sides of the infinity cube table and he also needs dimensions of it is there any way you could help me with that?
@@thedarknight471 this is a complex project, if you go with continuous pipe method like I did ,its going to take long time and have different dimensions and if you go with miter joint with sharp edges it's going to take less time. I don't remember the exact dimensions but fusion file you can do that.
Dear you can check the description there is fusion file link, you can get much better idea for the dimensions from that 3d model. Although the dimensions are planned for 18" cube table.
There is a design file of fusion 360 you can download that and check by yourself because it's too complex to explain. Although the lenght of one side is 500 mm, but it kept varying, so it's good to check the 3d file for better understanding.
Beautiful attention to detail. The fillet on the corners gives the whole thing a more continuous flow and I like the inset stone piece in the top instead of just putting it on top of the frame.
Thanks Dave. Appreciate your words brother:)
Its really awesome to see a square tube turned out in a beautiful table. Nice tips as well
Éxitos y bendiciones!!
Me encantaría que pudieras subtitular al español este y todos tus vídeos!!!!
Came out good! I built one of these out of 1in square tubing but mine required about 100 more cuts than yours. I like those radius corners!
Thanks brother appreciate that, definitely a bit more difficult table than normal construction
*Здорово👍тоже обязательно сделаю такой же чуть позже и залью на канал*
Nice work
you did an awesome job. I hope I can someday make something as beautiful. Thank you.
Yes, you can build
All the best.
You are incredible!
Awesome! I want one!
Fantastic work.👍
Well done good job
Thank you
awesome dive into details man! Love it.
Thank you brother 🙏
One look at this and I knew I wanted to make one with my everlast welder this weekend. That is so unique.
Thanks Alex.
Good work
Thank you for this video, you are the only one on youtube which given dimensions for making this cube table, it's also nice that with animation art, you are the best brother, thanks again.
👍👍👍
My pleasure dear, I glad I make it easy to understand :)
@@ambroscustom helo from Kleiven in Norway.
Can you pleace send me drawing at my Mail? Tore.Kleiven @outlook.com
Thanks in advance.
@@torekleiven5091 buddy 3d fusion file already been provided in the description you can check there. If needed any help feel free to ask.
Gret job! beauyiful but I'd like to know the sizes of the peaces prease. I am brasilian sorry!
Great work, I designed one as well in Solidworks. I will now try to re-create your design as a challenge, thanks! Hope to see more.
Thanks Austin. Sure you will see more contemporary furniture in near future.
awesome bro, great video
Great video. Very mice work.
Thanks pal:)
Can you do another video of you showing where you cut in so many inches. Before you bend it or weld it.
Buddy if you are going to build same size with 40 mm square pipe only then it's going to useful. I suggest you to first make a bend on scrap piece of pipe that will give you much better clear vision about this joint.
@@ambroscustom Ok I'll try with the same mm pipe.
It’s beautiful and contemporary, it would be equally at home at a high end restaurant or bar as in any home. You do a great job of presenting the videos and explaining everything. One day I going to make a 'river table' with a live edge and epoxy top, I was going to go for industrial legs but I’ve now changed my mind. I know it’s almost an impossible question to ask as there are many variables but is this a good weight bearing design please?
I’m also a keen bird watcher though I don’t get out much these days, was that a member of the starling family?
Another great video, you are a very talented man.
Thanks Mark, as far as the weight bearing capacity is concerned there are two points in this table where you can use blocks and increase its weight bearing capacity. During the starting of this build I wanted to be kept it a show piece, but simillar design can be use to bear a weight of 100 -130kg if you install support blocks onto those two positions. You can use acrylic blocks if you don't want them visible. I saw a video in which the maker uses acrylic rod to prevent the whole wooden cube from collapsing.
That's a hummingbird, seen after a long time in my area, might be because of lockdown and clean weather.
Good my friend
Thank you:)
Awesome!!! Hello from Canada
Hi mate :) thanks
Olá! Tem como passar as medidas dessa obra de arte? Eu quero fabricar um.
amigo, eu forneci um arquivo 3d do fusion 360 abaixo na descrição você pode verificar isso, o comprimento é difícil de dizer no momento.
Love your videos love India
Thanks man
Nice table , where to get that weldbright !
Check on IndiaMART
Pretty amazing concept of the build!👍
Well informed this infinity cube table 👌 &
What will be infinity cube table market price?
Thanks mate, I usually don't do this selling stuff, but for a six days of work and the complexity it took 10-12k.
Cus
ನೀವು ಕರ್ನಾಟಕದಲ್ಲಿ ವಾಸಿಸುತ್ತಿದ್ದೀರಾ?
What Amp you used for the welding
I use 80-90 amp for stainless Steel
Hey are you from India?
Respect! Salu2 desde España!
hermano muy apreciado
It is so beautifull 😘
Aree wahaa sir u are really great......
Great torurial
Still have 2 questions
1. Does somebody know how much a table like this can approximately hold. 2. Does the table react like a kind of spring when you put a heavy object onto it?
Thanks, there is an area in this table where if you add a transparent acrylic than weight carring capacity increase around 100-120 kg which I tested, without that around 20kg without any deflection and upto 30 deflect downward about ⅛". So if you want to bear heavy stuff just add some transparent acrylic in that way it's contain it's theme and still seems clean in look.
@@ambroscustom whoah, thanks for the quick reaction. Just to be sure: I am assuming the acrylic is between the top and the pipes just below it, and between the buttom pipes and the pipes just above that, correct?
Yeah, absolutely correct mate.
Infinity Cube Table
I am in high school first year. I'm curious to know how long this would take.I am very interested in this and I want to build one myself. If possible I would like to know the exact size of it. How long all the pipes would need to be and also what are the measurements of what was 3D printed? I know this looks will probly not be replied to but I really like this stuff
Buddy there is an instructables blog post link in the description all the files you need are already over there, you can check that.
@@ambroscustom thanks and keep up all the good crafts they blow my mind
Where can I find that template?
How much for table
Please good job what app/ software you used
I use fusion 360 software
Nice vodeo dude
Thanks mate
Please let me know about. Software name
@@MuhammadAwais-nn4xb it's fusion 360
Qro faser um desse
Sir i wish to meet you sir
What software do you use?
It's fusion 360 my friend.
@@ambroscustom Thank you
👍👍👍🌹
how about strength that table
Normally you can put 20kg on the table. If you add a member underneath the overhanging side then it's as strong as normal table. It's better to use acrylic piece as a supporting member. For normal coffee table you don't need any support
Qual aplicativo eu posso abrir o arquivo
é o software de fusão 360 meu amigo. é um software cad grátis.
You did grat job, bro. I hope if yo able to join withus in iraq. There is big business waiting you. Thx
Hahahahaha..........thanks pal for the generous words and offer. My current goal was something else rather than doing a business but if I have to do business then surely think about your offer in nearby future. Thanks for being here:)
PRICE BRO
I’m in my metals class does any other metal work because we don’t have stainless steel
You can use mild steel box section, those are excellent material, stainless is difficult to work with, go with mild steel pipes
@@ambroscustom how long did this take? My metal class period is only time I can work on it and it starts at 955 and ends at 1045. So I have feeling this will take a while for me
@@ambroscustom my teacher needs me to draw the top front and right sides of the infinity cube table and he also needs dimensions of it is there any way you could help me with that?
@@thedarknight471 this is a complex project, if you go with continuous pipe method like I did ,its going to take long time and have different dimensions and if you go with miter joint with sharp edges it's going to take less time. I don't remember the exact dimensions but fusion file you can do that.
I need a help
What was the size and length of the metal
Dear you can check the description there is fusion file link, you can get much better idea for the dimensions from that 3d model. Although the dimensions are planned for 18" cube table.
Please ...send the measurement....like hight...width ..length
There is a design file of fusion 360 you can download that and check by yourself because it's too complex to explain. Although the lenght of one side is 500 mm, but it kept varying, so it's good to check the 3d file for better understanding.
Manda as medidas do projeto
verifique a descrição do vídeo
how to contact you sir
Facebook, Instagram
Minta link aslinya dong mas???
tautan mana yang Anda butuhkan. saya tidak bisa mengerti.
Link asli video di atas Mas.
Really awesome😍😍😍good job...
Thanks Sakshi..