As long as the cells are capable of high current such as those from tool batteries. Standard laptop type cells can barely put out 2 amps before dropping voltage drastically. Using very low power for propulsion is another option.
@@Andy-df5fj Maybe, it's better to match your battery and max ampere of your motor did not exceed the maximum discharge current of your battery to avoid overheating and damage the battery. You can use Vape Cells Original Brand and search their specs those are high discharge rate li ion cells.
@@arielelijah1282 Yeah I've done the low power matching thing in my early RC days with some laptop cells that were only capable of about 2 amps before voltage dropping below cutoff. It worked and flew for over an hour per charge, but it was way underpowered and not fun to fly.
I had made same plane with such battery about 3 years ago... When l went to fly wind was hard, and my aircraft flyed away very high and very far...))) I could not find it... Now I want make new plane))
Soldering Li Ion Bats is a very risky job . Keeping the Soldering tip for too long is dangerous as seen in the video .I have seen people loosing their fingers due to cell explosion. Avoid Soldering Li Ion batteries and try spot welding instead. Even if you are doing ,a friendly advice is to discharge batteries before Soldering.
Exactly what I was going to mention. You could probably come up with a spot welding rig using a car battery and some way to vary the Amp output. I would experiment on dead nicad batteries, until you get it right, _then_ assemble the actual battery packs.
Bro, iss battery pack se fly time to dekhaya, kya iss battery se lipo battery ki tharha same thrust milta hai kya n isse use karne se esc n motor damage hone ka khatra hota hai kya, plz reply
within 5 minutes battery will heatup and catch fire because Li ion cell is not high discharge cell i. e it is only 2c or 3c whereas lipo is 20c,25c,30c,35c,40c etc safety for rc plane.
Keep up the spirit and work.... continue
As long as the cells are capable of high current such as those from tool batteries. Standard laptop type cells can barely put out 2 amps before dropping voltage drastically. Using very low power for propulsion is another option.
Molicel brand 18650 does support high discharge current.
@@arielelijah1282
Cool. Is that the brand used in the video?
@@Andy-df5fj Maybe, it's better to match your battery and max ampere of your motor did not exceed the maximum discharge current of your battery to avoid overheating and damage the battery.
You can use Vape Cells Original Brand and search their specs those are high discharge rate li ion cells.
@@arielelijah1282
Yeah I've done the low power matching thing in my early RC days with some laptop cells that were only capable of about 2 amps before voltage dropping below cutoff. It worked and flew for over an hour per charge, but it was way underpowered and not fun to fly.
@@Andy-df5fjwhich air craft did you fly with it
Very nice 👌 👍
Wow nice👍👍👍
I had made same plane with such battery about 3 years ago... When l went to fly wind was hard, and my aircraft flyed away very high and very far...))) I could not find it... Now I want make new plane))
Make sure to check the battery mah
Must be 2200 and up with ion batteries to have the power you need
Just a tip. Use special aluminum solder. It make it easier and faster to solder.
Superb work brother.
Que ESC usas xq para que lo agarre esa bateria
Nice
Soldering Li Ion Bats is a very risky job . Keeping the Soldering tip for too long is dangerous as seen in the video .I have seen people loosing their fingers due to cell explosion.
Avoid Soldering Li Ion batteries and try spot welding instead.
Even if you are doing ,a friendly advice is to discharge batteries before Soldering.
Nice information
You are absolutely right
Exactly what I was going to mention. You could probably come up with a spot welding rig using a car battery and some way to vary the Amp output.
I would experiment on dead nicad batteries, until you get it right, _then_ assemble the actual battery packs.
BRAVO!!!! BRAWO !!!
Grt work bro 🔥
Hi, is it okay if I didnt use spot welding (only normal soldering)?
if you use a soldering iron you can potentially damage the battery but it shouldn't be a big deal ¯\_(ツ)_/¯
That's right. This is not recommended because these motors require a lot of amperage, these batteries are for lighter use.
Use ev grade battry instead
Please let me know voltege and amp of total pack and where are you using is it for Ricever? Or Motor
I know you will build a big rc ornithopter
18650 kondisi baru klo digeber terus meski baterai masih sisa banyak kenapa suka turun tegangannya ya?
Yeah Lion👍
🔥🔥
Please aap ek without controller wala 2 micro coreless motor se ek isi type ka thermocol plane banaiye..plz...plz..plz...plz
Bro dose this battery charge on imax b3pro?? Pls ans
Yes, It works better then b6. I tried this
Really nice, how much weight those battery ?
It looks like a bomb 🙈
Agar iss battery pack se 2212 ki 1400kv motor with 8045prop and 30amp esc use karu to motor n esc me koi problem hoga kya, plz reply
koi problem nahi hogi , you can use it
@@3JWings iss battery se lippo battery jaisa thrust milega Sir ?
❤️🔥❤️🔥❤️🔥❤️🔥❤️🔥
Привет! Завораживает то что ты делаешь! Просто великолепно!👍👍👍 Из какой ты страны? Я из России.
India
Bro my battery is heating continuously
You are applying the wires in opposite direction
👍👍
Bhai battery vate Kitna hoga
Bhai esc to damage nahi honga na…?
Tell me total voltage and continue
discharge rate
Bro, iss battery pack se fly time to dekhaya, kya iss battery se lipo battery ki tharha same thrust milta hai kya n isse use karne se esc n motor damage hone ka khatra hota hai kya, plz reply
ha same thrust milta hai, koi issue nahi hai aap use Kar skate ho.
Battery amp???
Just buy a ready made lipo probably just as cheap ! Excellent video though.
Bro it is way cheaper
Bro li ion battery is half a dollars and lipo is around 12 dollars
👍
It seems cheaper but dangerous
How much minutes does it work
8-9 min
Hello, I just wanted to know how did you get the C rating for the Li-ion battery.. Thanks
Well, for 18650's, it's usually between 2-5C
What one can do is make a parallel pack, 3s2p
That can double the c rating
@@animishaalagappa2327 THANKS for the info! God Bless you always...
Hi bhaiya please please please ek single motor se RC drone jaiya Kuch banayi ye na mujhe pata he aap Bana loge
within 5 minutes battery will heatup and catch fire
because Li ion cell is not high discharge cell i. e it is
only 2c or 3c whereas lipo is 20c,25c,30c,35c,40c etc
safety for rc plane.
For simple cruising the Li Ion can be used .I am using 3s Li Ion battery on my 3" Cine Whoop which flies for 15 minutes
ITS 15 C battery SEE
They use them in Teslas so why would it not work?
Is plane ko banane mein total kitna cost padega??
8hazzar
only with high drain cells!
Get a battery spot welder dude.
Everything good but use 100w soldering iron if u don't have one dm me I'll send you I've couple of those laying around
Give me then i use a 25w iron
in reality its never gonna happen coz discharge rate is very low in these batteries
.... Those kind of batteries don't work and the wires can easily break off the connection Because there's no strain relief....
Mah?
Not supposed to heat the battery. Duh