ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
LEVELED TITAN GETS 20x12 WHEELS WITH 35" TIRES
ฝัง
- เผยแพร่เมื่อ 4 มี.ค. 2021
- I put 20x12 Vision Rocker wheels with 35" Toyos on my leveled Nissan Titan and it looks epic!
Vision Rocker Wheels: amzn.to/30hpVJ3
Leveling Kit: amzn.to/2OppolG
35" Toyo Tires: amzn.to/3efuxHU
Check out our website: dustrunnersauto.com
Follow me on Instagram: @bryce.cleveland
Gear I use to shoot my videos:
(Buying through these links supports the channel)
Panasonic G7: amzn.to/2FKsmKe
Panasonic 25mm F1.7: amzn.to/2X8LQhG
Rode Mic: amzn.to/2J0lrik
Tascam DR05: amzn.to/2LvYFjR
Neewer lights: amzn.to/2Xem68x
2:03 The " boys came to help". Looks like the "boys" came to do the job for you🤣🤣🤣
That’s just what was shown on camera for the video. I had to do A LOT more cutting after they went home.
I would like to see a breakdown video of the 5.6 VK56DE engine in these. And the second gen 5.6 VK56VD that's in the newer titans. Good looking truck! I have a 2018 Titan and I've been loving it thus far
Came here to ask the same
I have 33 tires with 12 wide rims and -51 offsets and I had to cut at lot ..... imagine 35 ... I want go with 35 but I will change the offset to -25 and see if that help... thanks for the video
I got an 06 Titan with 35x12.5 20" and a 6" lift it gives plenty of clearance for even 37's if you wanted but with the 35's it gives the truck perfect symmetry.
You think a 3 inch lift would do plenty? I’m debating on if I keep my 3 inch or if I go 6 when I go to get my new wheels and tires. Want to do 20” wheels. And most likely 35’s for tires
@@donovan9356 a 3 inch would make a difference but I'd go with 6 just so you know for sure you have the clearance
Sweet truck! Been restoring mine for 5 months so far.
MAN I GOT A 2005 TITAN ALL STOCK I WAS THINKING 3IN LEVELING KIT IN THE FRONT I WANT SOME BIGGER TIRES PLEASE LET ME NO WHATS BEST TO DO SOME 33 R SOME 35 IN TIRES
33s are much easier to fit. Even with a ton of cutting, the 35s run and tear stuff up.
How bad do they rub? I have a 3in RC lift, 33s and the stock rims spaced out but I really want 20x12 rims and 35s if they don't rub to bad after all the cutting is done?
Can you do a video about the vk56de
Came here to ask the same
Nice dude. Keep it on the road and keep it nice.
I have a 2012 running 35x12’s, 3” lift front and rear with bilstein 5100. 5 years later no problems but year 6 I’m having problems with having to replace cv half axels after replacing all ball joints and rods. I’ve been through 2 half axels (new with 3k miles) in 2 months tearing both inner boots. What gives? Is there any diff lowering kit I’m not aware of on the market for 3” kit and/or axle spacer kit?
How much did you go down on MPGs with them 35s?
Looks great!! Nice shirt btw
Man this is my first time watching one of your vlog style videos and I gotta say I did not expect you to be a truck guy lol
Trucks, cars, motorcycles. I love them all! Two bikes plus the truck currently. Looking to add a street car to the mix soon too 😬
when will u do a video on the history of the nissan VK series?
What was the negative offset?
those are the same wheels i have theyre nice asf i put them on my titan aswell
Nice! 4X4 or 2wd?
I have a 2006 with a leveling kit would I be able to fit 33x12.50r18 without any problems
Little late 2 months but I have an 06 as well I run 33x12.50r20 with a -12 offset no problem just took off the mud flaps no rubbing at all
Why you don't do a video about the 5.6 engine 🤔
Hows it ride after that leveling kit?
They ride or at least mine rides good I have the 3in level kit it’s awesome looks great and performs great uhh I would say that the A arm is gonna make a noise if you hit a big bump but other then that it’s fine they do what you to get aftermarket parts but it works good I’m wantin 35s the 3in level makes my 32s look small and I want that farm boy look where it fills up the fender so I would say the level makes the truck look better and perform good to
What bolt pattern is Nissan titan 08?
6x5.5 or 6x139.7