Thanks, I wanted to see how to disassemble so that I can make a dummy battery for my laptop. I use the laptop in some extreme climates which always kills the battery and I only use it with the AC adapter anyway. Dell does not sell dummy batteries for my situation so this helps me to make one of my own by removing the batteries and leaving me a shell to put into the battery location. Nice work and thanks a bunch.
Genuine Dell battery can not be disassembled this way. Itt is sealed, the cells are glued to the inside wall, and embedded in a rubberlike black material. Impossible to open without destruction.
I had the same battery, when I tried to remove the housing I accidentally knocked off three SMD resistors R17, R19 and R21 I measured the values of tho resistors, it seems they are 100ohms but the remaining one is still a mystery. Do you know the values of those? It'd be so helpful. Thanks in advance.
Hi Gowrishankar, Unfortunately i dont know the value of the remaning resistor , its better to buy a new battery it may not worth the effort of reparing and buying new 4 cells.
Thanks, I wanted to see how to disassemble so that I can make a dummy battery for my laptop. I use the laptop in some extreme climates which always kills the battery and I only use it with the AC adapter anyway. Dell does not sell dummy batteries for my situation so this helps me to make one of my own by removing the batteries and leaving me a shell to put into the battery location. Nice work and thanks a bunch.
Great 👍👍,love from India ❤️
thanks a lot :)
Thank you so much
Genuine Dell battery can not be disassembled this way. Itt is sealed, the cells are glued to the inside wall, and embedded in a rubberlike black material. Impossible to open without destruction.
Did you would have any other photos of the bms with high details??
Controller is BQ40320
jaise 4 cell hai ..aur usme 1 kharab hai ...to kiya kharab ko hata kar 3 cell pr chala sakte hai?
nae, agar total voltage 14.8v hai to 3 cells 11.10v voltage pe kaise chale ga., battries weld hain boht mushkil hai change krna.
How much mAH capacity should I buy to replace dead battery?
2800 mAH, its better to buy new dell battery.
Sir can I know voltage and amps of each cell?
3.75v.
2800mAH clamied by the manufecturer but can be higher when tested.
Please give the battery protection board circuitt buying link please
I had the same battery, when I tried to remove the housing I accidentally knocked off three SMD resistors R17, R19 and R21
I measured the values of tho resistors, it seems they are 100ohms but the remaining one is still a mystery. Do you know the values of those? It'd be so helpful. Thanks in advance.
Hi Gowrishankar,
Unfortunately i dont know the value of the remaning resistor , its better to buy a new battery it may not worth the effort of reparing and buying new 4 cells.
@@LFITT Thanks, but I already got the cells :(
@@GowrishankarLeGrand follow the color code of the resister to know the value.
@@abdulaleem490 It's an 0402 SMD resistor
Hey you did not show the change of any battery,the main part.
no, in this video i disassembled the battery and tested the cells.
Sir maine dell laptop battry me 4 naye cell dale lakin 7 % se age chaging nahi ho raha hai v 11. 1 to mil raha hai phir bhi
I MEAN GET THE BATTERY BMS CIRCUITS BOARD LINK
Sir one battery is how much mAH?
2800 mAH
Y dell k konse model me use hoti h
👍
Battery cells where it is available?
this is the cell model no. lgabc41865 try online bro.
if you want to make your battery trash, you can use this tech
This is hard
00000.