I’m glad that Iron Man is at least the same size, or maybe only 5% taller, as Captain America. The height thing always bothered me on the previous Extremis Iron Man
Now if we could only get a new classic Vision that's at least the same height if not a hair taller than Cap. The last one we got (2018) was on the Sunfire buck and it's too short. Cap is 6'2", Vision is 6'3".
Love the darker blue and red for Cap(and Superman). I'll probably pick him up eventually. Toy companies must be terrified of the upper ball joint torso except Mafex. That's the only reason I can see why they never give it the range needed to be useful. But it's a two part system. The lower torso needs to have forward/back articulation moreso then the top.
I've been assuming the gun grip hands that sometimes come with Cap figures are for gripping the shield by the edge. The shield clamp breaks on some figures more than others. The worst I've seen is the one in the HYDRA Supreme and Arnim Zola two-pack--that one breaks for pretty much anyone who tries to use it because they used the same stiff, brittle plastic for the shield they used on the figure. Some shields have softer, more pliable plastic that the clip expands fine for. I've been using the retro-carded Cap shield for years because its plastic seems fine to bend in and out a bit.
I swear man for comic Captain America it’s always the clip and peg for the shield, but once it’s a MCU Captain America it has plastic straps. Why not have plastic straps for the comic cap shield? Why is that so hard?
Regarding the C-clamp Shield, why don’t people take off his hand, sleeve the shield then put the shield back on? If the shield is on the wrist joint (the smallest part of the arm) it doesn’t stress the “C”.
One of the best sculpted Cap figs. Texture and fabric wrinkles look great. I agree with MCU Collector about him needing a ball joint at the waist to compliment the one at the diaphragm. That or an ab crunch. I would've liked to see a ball joint in the head and one at the base of the neck. Still Hasbro seems to muck those up more often than not. As for the shield clip they should use the rotating straps that the GI Joe Classified Alley Viper has on his shield. The strong colours look good. This and Extremis Iron Man are my most wanted.
I was honestly going to preorder this Captain America because I wasn’t a fan of the 20th anniversary Cap but I ended up canceling the preorder and tried to get a different Cap. I tried to get the vintage Captain America but ironically Amazon sent me the wrong figure and I got the 20th anniversary figure. I’m honestly pretty satisfied to have him in my collection despite the problems with the shield.
The fact that they gave him a diaphragm swivel AND a waist cut, makes me think they did it so people can mod the 20th Cap to just give him the diaphragm swivel. Or its going to be reused for another Classic Cap. The latter is more likely.
If you're excited for the Marvel Legends Captain America (Secret Empire) you can compare with the Marvel Legends Ultimate Captain America that they each have the same grin head sculpt that they'll look like twins
If someone can mod that ab crunch then I might get it but why in the world they can't give a decent ab crunch for capt. it's like the ab crunch on ML woman's body like spinnerette. On the sculpt factor I agree its a good one.
They’re still using that damn c-clip on the shield?! They have the strapped shield that they used for Stan Lee and Zombie Cap but not for the “ultimate”
Guess Hasbro had to cut corners somewhere. They really didn’t do the new sculpts justice for Cap or Ironman by limiting the articulation. Ball joints at the waist, butterfly shoulders, and drop down legs would make these definitive versions of the characters/costumes that even imports would struggle to out value. They both look like solid figures but definitely less dynamic that the other new stuff the Legends team has put out recently. Hope this isn’t a sign of things to come with characters that they know will sell.
Hasbro pulse says June 1st, man my wallet needs that date to stick I can't afford all these waves between ML, DC multiverse and gi Joe classified but damn I want this wave! I wish I had passed on the Nolan bane baf wave now that I have it and got this instead.
Wonder if we can pop that torso and shave off some plastic to increase the range. Ball joint waist would have been awesome. But a swivel is fine. Atleast we got something unlike the extremis which feels so stiff...
This is the modern comic Cap I'm gonna get. I don't mind the diaphragm joint but the wait swivel is redundant. A personal preference I would've liked is that he had painted wings on the sides of his cowl, based on the Ultimate Spider-Man and Avengers Assemble cartoons which the deco of the Cap at 9:24 is also based on but I guess it would have not looked good on the ribbed pattern. But a nitpick I have is that the center stripe on his abdomen is white not red. I did not notice that until now, even I was constantly looking at the promo images for this. That's gonna bother me.
I love captain America and I love this figure 9.8/10 (BUT DANG THE PEG SHEILD) I hate it, it always breaks all the time but it’s ok I have other ones that I can use instead still gonna get the figure
My us agent broke😫 I can't wait for this wave but I'd prefer they stick to the june1st release so my account can rebound from the figures they dumped on us starting last October.
7:14, technically not true, diafram joint would be excellent if it is implemented properly, just like a double ball peg is better for neck articulation, problem is that Hasbro doesn't execute them well.
@@MCUcollector24 They only changed the upper torso and the shoulders back then, anything that had scales on it. They probably would do the same and save a buck
they are really tryna copy mcfarlane with the torso and failed, but i will 100% get barron he is the best hydra member imo and he would look great on the shelf.
Excellent figure. Like you said, the clip on the shield sucks as it could break, plus the limited torso articulation. Otherwise, no complaints. The sculpt, paint, alternate head and fists. Great
@mcucollector24 when is Hasbro going to announce the prop replica like Captain America Secret Empire Comic Shield when it's different than the round Marvel Legends 80 Years Captain America Comic Shield?
@@collegerebel You have no idea how excited I am for those figures. Them and the Mega Man stuff. Jada Toys seem like really promising up and comers, and I can't wait to see what they do next.
My word the range on these Diaphragms is terrible! You know you ain't doing it right when Black Series got better range. Smh, the sculpt is quite nice though. I might wish I could switch out the forearms but can't with the pinless tech.
I actually wait Yelena :) to round out my AIM "army" and Wonder Man is not appealing to me. Neither was the Exremis Iron Man. Molecule Man and von Strucker are sleepers as you said :)
This guy has a great design, but that diaphragm joint is junk. ***If*** I were to pick him up it would be for the accessories. (Belt, shield and maybe use the heads with the Marvel's 80th Anniversary Cap.)
Fun fact: Iron man's extremis armor did once appeared in the ultimate universe in an issue of ultimate spider man requiem in which he used the pre ultimatum armor to stop madame hydra and her goons from stealing what is truly his I think? It was brief but nonetheless it was for fan service moment.
As I’m looking at this Captain America, I’m seeing the possibility of customizing him into a more appropriate AVALANCHE figure. That angry face prompted that idea in my head.
@@javierlechuga9112 I’m thinking you may have to use sculpting clay to make the helmet and to sculpt armor on the figure. The new AVALANCHE is too small body wise, but this CAP buck has the proper musculature for AVALANCHE.
Nice review! Very excited for Cap & Extremis IM. Dan Yun did confirm to me on Twitter that the shield is the exact same size as Unparalleled Cap. Can't wait!
Due to random pooptube restrictions I can't fully appreciate the part of the video when you slightly sing' the diaphragm joint isn't too good ' which I feel due to random pooptube weirdness, would mandate monetary random pooptube restrictions. Otherwise very fartworthy 😛
We all don't like a douchebag Steve Rogers aka Captain America, But to me, I need to get him because his head sculpts are so cool and his own badass shied has no holes and I need to get the new comic style classic Black Panther to display them both in my own Avengers comic display, Fantastic review overall MCUcollector24.
This is such a Meh figure for the Price.... why buy this? Its not the definitive Cap look. Wheres the Wings on the helmet? Just get the 20th Anniversary Cap. Its perfrct.
Ab crunch plus waist swivel will always be superior. Anyone who prioritizes "looks better" (debatable) over articulation on a figure like this should stick to collecting statues, not sorry.
I hope we get the full ultimate avengers roster Ultimate Iron Man,Thor, Hawkeye, Wasp, Black Widow, BAF Giant-Man & Hulk
They should do them as a wave in the near future
Agreeed
I want the ultimate hawkeye in the mask looks so bad ass on the spidey renew ur vows buck
@@viktorkarrillo7343 that would be so badass 🔥🔥🔥
The Ultimates, Ultimate X-men, Ultimate Fantastic Four all need figures most of the ultimate marvel figures are quite old.
I’m glad that Iron Man is at least the same size, or maybe only 5% taller, as Captain America. The height thing always bothered me on the previous Extremis Iron Man
Now if we could only get a new classic Vision that's at least the same height if not a hair taller than Cap. The last one we got (2018) was on the Sunfire buck and it's too short. Cap is 6'2", Vision is 6'3".
@@collegerebel yes they made him too short
Love the darker blue and red for Cap(and Superman). I'll probably pick him up eventually.
Toy companies must be terrified of the upper ball joint torso except Mafex. That's the only reason I can see why they never give it the range needed to be useful. But it's a two part system. The lower torso needs to have forward/back articulation moreso then the top.
I've been assuming the gun grip hands that sometimes come with Cap figures are for gripping the shield by the edge.
The shield clamp breaks on some figures more than others. The worst I've seen is the one in the HYDRA Supreme and Arnim Zola two-pack--that one breaks for pretty much anyone who tries to use it because they used the same stiff, brittle plastic for the shield they used on the figure. Some shields have softer, more pliable plastic that the clip expands fine for. I've been using the retro-carded Cap shield for years because its plastic seems fine to bend in and out a bit.
I swear man for comic
Captain America it’s always the clip and peg for the shield, but once it’s a MCU Captain America it has plastic straps. Why not have plastic straps for the comic cap shield? Why is that so hard?
Honestly bought this just for the shield to Kitbash with my 20th Anniversary Cap. Looks like I won't be disappointed!
Captain France!, could be used also as a Skrull, you know, try to simulate the Secret Invasion plot from Avengers Earth´s Mightiest Heros
Regarding the C-clamp Shield, why don’t people take off his hand, sleeve the shield then put the shield back on? If the shield is on the wrist joint (the smallest part of the arm) it doesn’t stress the “C”.
That’s one option, but pegging the hand back into the wrist could cause you to break it too
They have been using the same clip system since the toybiz days!! I really wish they would do the straps that the mcu figures use instead.
That's the logical choice, but apparently logic doesn't flow over at Hasbro.
Just ordered this guy off Amazon he’s so become my my cap in my display grew up watching the ultimate avengers animated movie as a kid
One of the best sculpted Cap figs. Texture and fabric wrinkles look great.
I agree with MCU Collector about him needing a ball joint at the waist to compliment the one at the diaphragm. That or an ab crunch.
I would've liked to see a ball joint in the head and one at the base of the neck. Still Hasbro seems to muck those up more often than not.
As for the shield clip they should use the rotating straps that the GI Joe Classified Alley Viper has on his shield.
The strong colours look good. This and Extremis Iron Man are my most wanted.
I was honestly going to preorder this Captain America because I wasn’t a fan of the 20th anniversary Cap but I ended up canceling the preorder and tried to get a different Cap.
I tried to get the vintage Captain America but ironically Amazon sent me the wrong figure and I got the 20th anniversary figure. I’m honestly pretty satisfied to have him in my collection despite the problems with the shield.
One of the best Sculpt Marvel Legends so far. Totally the next target to pick up 😊.
2:07 don't look like so separate toad eyes like always , i'm happy
The fact that they gave him a diaphragm swivel AND a waist cut, makes me think they did it so people can mod the 20th Cap to just give him the diaphragm swivel. Or its going to be reused for another Classic Cap. The latter is more likely.
Can't wait to see more ultimate marvel legends like ironman and others also a brand new and much better ultimate Peter Parker
If you're excited for the Marvel Legends Captain America (Secret Empire) you can compare with the Marvel Legends Ultimate Captain America that they each have the same grin head sculpt that they'll look like twins
I hope theyd do another US agent like this Good not lazily made with an old buck
If someone can mod that ab crunch then I might get it but why in the world they can't give a decent ab crunch for capt. it's like the ab crunch on ML woman's body like spinnerette. On the sculpt factor I agree its a good one.
They’re still using that damn c-clip on the shield?! They have the strapped shield that they used for Stan Lee and Zombie Cap but not for the “ultimate”
They’ve only used those strap type shields for MCU figures
@@MCUcollector24 But why is my question. I’m guessing the non-MCU figs have more accessories and it’s just not in the budget. Stupid excuse if so
@@gaboh296 I agree they should use the straps for comic ones
Guess Hasbro had to cut corners somewhere. They really didn’t do the new sculpts justice for Cap or Ironman by limiting the articulation. Ball joints at the waist, butterfly shoulders, and drop down legs would make these definitive versions of the characters/costumes that even imports would struggle to out value. They both look like solid figures but definitely less dynamic that the other new stuff the Legends team has put out recently.
Hope this isn’t a sign of things to come with characters that they know will sell.
Hey Mcu Collector von strucker is NOT pinless. The box shows pins in his arms
passing on this figure, the cap that came out last year is the only cap in my collection and I’m happy with him lol
I was going to pass on this one but now I might pick it up.. he looks really good 🤙🏻
Hasbro pulse says June 1st, man my wallet needs that date to stick I can't afford all these waves between ML, DC multiverse and gi Joe classified but damn I want this wave! I wish I had passed on the Nolan bane baf wave now that I have it and got this instead.
Hi Captain America is my favorite superhero
Hi want a cookie?
Same
@@StarGazer_96 I want a cookie 🍪
No one asked, bye
A ball joint gives you more and better articulation, it just has to be well implemented, by that I mean it has to be well designed
I loved the art of Joe mad when he did his run on ult captain america.
No ab crunch on Cap or Iron man is bit of a letdown. But they do look good.
Wonder if we can pop that torso and shave off some plastic to increase the range. Ball joint waist would have been awesome. But a swivel is fine. Atleast we got something unlike the extremis which feels so stiff...
A simple double ball peg would’ve given you ALL the range in that diaphragm joint. Its like the Hasbro design team has no idea wtf they’re doing
A diaphragm cut that gets almost no range on a domestic figure, there's a reason Gi Joe classified are the best articulated Hasbro figures
This is the modern comic Cap I'm gonna get. I don't mind the diaphragm joint but the wait swivel is redundant. A personal preference I would've liked is that he had painted wings on the sides of his cowl, based on the Ultimate Spider-Man and Avengers Assemble cartoons which the deco of the Cap at 9:24 is also based on but I guess it would have not looked good on the ribbed pattern. But a nitpick I have is that the center stripe on his abdomen is white not red. I did not notice that until now, even I was constantly looking at the promo images for this. That's gonna bother me.
That iron man looks like rescue
Lol I dnt understand how ppl keep breaking the clips on Cap's shield. LITERALLY has NEVER been a thing EVER for me 🤷🏾♂️
I love captain America and I love this figure 9.8/10 (BUT DANG THE PEG SHEILD) I hate it, it always breaks all the time but it’s ok I have other ones that I can use instead still gonna get the figure
My us agent broke😫 I can't wait for this wave but I'd prefer they stick to the june1st release so my account can rebound from the figures they dumped on us starting last October.
7:14, technically not true, diafram joint would be excellent if it is implemented properly, just like a double ball peg is better for neck articulation, problem is that Hasbro doesn't execute them well.
Really excited for Molecule Man
I have been stoked for a Molecule Man figure ever since reading Al Ewing's Ultimates, so its the highlight of the wave for me.
How did you get that,on Amazon the release date is June 1st 2023 and same with the new iron man
Big Bad Toy Store
High chance they will use this for Sam Wilson, Captain America like they did with that Marvel Now version
I think that figure only used the same legs. Sam wears a different suit, but maybe they could use the arms and legs I don’t know though
@@MCUcollector24 They only changed the upper torso and the shoulders back then, anything that had scales on it. They probably would do the same and save a buck
I think he is the best captain American Hasbro marvel legends have released.
Hey hello to ultimate captain america.❤💙😉
Really need this figure
they are really tryna copy mcfarlane with the torso and failed, but i will 100% get barron he is the best hydra member imo and he would look great on the shelf.
Wasn't going to get this Cap but seeing it here makes me think I might!
Nice, this is one I preordered
Excellent figure. Like you said, the clip on the shield sucks as it could break, plus the limited torso articulation. Otherwise, no complaints. The sculpt, paint, alternate head and fists. Great
Probably picking this up now…
Heck yeah. I’ve been waiting to see a review of this dude!!!🖤
@mcucollector24 when is Hasbro going to announce the prop replica like Captain America Secret Empire Comic Shield when it's different than the round Marvel Legends 80 Years Captain America Comic Shield?
I have 2 sets of the wave already. Selling one tho
Western toy companies need to embrace the double ball peg upper/lower torso combo.
Jada Toys are with their upcoming Street Fighter line. And those will be pinless, too.
@@collegerebel You have no idea how excited I am for those figures. Them and the Mega Man stuff. Jada Toys seem like really promising up and comers, and I can't wait to see what they do next.
They should’ve done an Ultimate Hulk BAF to be honest, could you imagine a whole Ultimate Avengers wave ?
Been waiting for this guy to show up
Even though they don't belong in the same universe, that iron man and captain America look pretty good together.
They are in ultimate alliance together
I can’t wait to get that figure 👍👍👍🙏🏽
I bet that belt we’ll be reused for another 616 Cap in the future.
Definitely Pick It
How have they still not come up with a new clip for the sheild?
Forget the clip. They have the MCU shields with straps in them. Use those, but with smooth, comic book shields.
I can't get over the fact that most captain america figures dont come with pointing and saluting hands
20th Anniversary did
@@MCUcollector24 and the CapWolf, which was first to use those hands.
new to your channel but well done review! Figure looks good
I like your star
My word the range on these Diaphragms is terrible! You know you ain't doing it right when Black Series got better range. Smh, the sculpt is quite nice though. I might wish I could switch out the forearms but can't with the pinless tech.
thanks man
Really like this one, the pinless and diaphragm really sit well with me. Can't wait for mine
was this close to being the best comic cap figure. waist articulation brought it down
If I didn't already have the 20th anniversary Cap, I probably would have gotten this one.
I’m excited to get him in hand. Mine is in the mail. I’m definitely going to try and modify the forward movement. Solid review 👊.
I actually wait Yelena :) to round out my AIM "army" and Wonder Man is not appealing to me. Neither was the Exremis Iron Man. Molecule Man and von Strucker are sleepers as you said :)
This guy has a great design, but that diaphragm joint is junk.
***If*** I were to pick him up it would be for the accessories.
(Belt, shield and maybe use the heads with the Marvel's 80th Anniversary Cap.)
Really hope they don’t do the other Ultimates
Damn cap has a big head
I want this & Iron Man. This looks better than I thought. How did you get it so early?
Big Bad Toy Store
@@MCUcollector24 thanks. I checked, it’s still up for pre-order. Is the shield clip the same one they used for 80th Anniversary Cap?
Yes, it’s in the review
@@MCUcollector24 i have a great experience with the shield.
In comics his suit doesn't have a star on the back.
we need an ultimate hulk
Facts
FINALLY!!
Fun fact: Iron man's extremis armor did once appeared in the ultimate universe in an issue of ultimate spider man requiem in which he used the pre ultimatum armor to stop madame hydra and her goons from stealing what is truly his I think? It was brief but nonetheless it was for fan service moment.
i have this one i save from the children destroyer
You dont have the marvel 80 yrs cap?
Of course I do
@@MCUcollector24 they both identical? Given the pinless.
Not the same at all
Why didn't they use the same binding system as the Captain Carter action figure's shield on the Ultimate Captain's shield? Wake up Hasbro!!
MCU shields get the strap version, comic does not
... Am I the only one who has never had a single shield clip breakage?
Yes probably
Reminder that the A does not stand for France.
So it’s an action figure than can barely be posed? WHY. Just get a statue at this point. Why would they do this?
As I’m looking at this Captain America, I’m seeing the possibility of customizing him into a more appropriate AVALANCHE figure. That angry face prompted that idea in my head.
Same idea here. That angry head could be a great Avalanche.
@@javierlechuga9112 I’m thinking you may have to use sculpting clay to make the helmet and to sculpt armor on the figure. The new AVALANCHE is too small body wise, but this CAP buck has the proper musculature for AVALANCHE.
🤟🏾
Nice review! Very excited for Cap & Extremis IM. Dan Yun did confirm to me on Twitter that the shield is the exact same size as Unparalleled Cap. Can't wait!
Dammit Amazon send mine 😂
C-Clip, BOOOOOOOOOO!!!
That diaphragm is extremely disappointing
Due to random pooptube restrictions I can't fully appreciate the part of the video when you slightly sing' the diaphragm joint isn't too good ' which I feel due to random pooptube weirdness, would mandate monetary random pooptube restrictions. Otherwise very fartworthy 😛
Omg.. that’s a terrible decision on the diaphragm and waist … 😂
🤟🏻
I wish the Ultimate Avengers animated movie was as hardcore as the earlier comics. 😸
hasbro really needs to seek your expertise before releasing another item. 👍👍
795 liked
Hasbro trying to match McFarlane for costume texture.
Swivel waist in 2023 at $25... unacceptable
We all don't like a douchebag Steve Rogers aka Captain America, But to me, I need to get him because his head sculpts are so cool and his own badass shied has no holes and I need to get the new comic style classic Black Panther to display them both in my own Avengers comic display, Fantastic review overall MCUcollector24.
Please marry me
This figure is junk ankles so loose he wont stand, shoulder joints dont work at all and even without pins his knee is still like rubber what a ripoff
This is such a Meh figure for the Price.... why buy this? Its not the definitive Cap look. Wheres the Wings on the helmet? Just get the 20th Anniversary Cap. Its perfrct.
Because this is the version of cap from the ultimate comics not 616. Learn to read the title of the video.
Ab crunch plus waist swivel will always be superior. Anyone who prioritizes "looks better" (debatable) over articulation on a figure like this should stick to collecting statues, not sorry.