New Impact Wrenches Show Price Doesn't Mean What it Used to
ฝัง
- เผยแพร่เมื่อ 10 ก.ค. 2023
- Gen 3 SeeSii: amzn.to/3O66lJo
Gen 2 SeeSii: amzn.to/46WkoZN
Our lifetime of TOOL RANKINGS now include saws! torquetestchannel.etsy.com
Today we dyno test the new Ingersoll Rand W3151 Compact Cordless impact vs the M18 Gen 3 as well as the latest Gen 3 SeeSii CP1B0021US Amazon impact wrench vs its closest competitors in the Ridgid Mid Torque and Milwaukee & DeWALT.
~We may earn from qualifying purchase via the links above~
As always, the creator of this channel works in product development for Astro Tools, who also make impacts (air) always consider multiple sources when looking at a tool! - ยานยนต์และพาหนะ
How many seas could a SeeSii see if a SeeSii could see seas?
7 max 😂
Just count how many boat rides it takes before it gets to California.
42
😂😂😂
Hmm not sure about that. But mine has held up great for the year I've it
When I was a young man I bought tool brands like Snap-on because I figured they'd last a lifetime. Now I'm in my 70s and I buy tools from Harbor Freight, because I figure they'll last a lifetime... mine at least. I bought a SeeSii battery impact wrench after your first test of one and it rides on my tractor to make in-field maintenance easier. It has worked well, and if it does die because of mistreatment, well, it won't break the bank to buy another.
I never knew just how much I appreciated you guys until I saw the Summer Vacation banner and my heart sank . “@ Thank you TTC!
Just wanted to thank you for what you do. I needed some beans to work on my jeeps transfer case and I dont have $500 that I can invest into a tool that might get used only a few times a year. Seesii was exactly what I was looking for. Finished the job yesterday.
I use the ridgid mid torque and their 3/8 sub compact everyday at work as a mechanic. It is great to see how it fairs against everyone else.
How long have you been using it? How do you maintain it?
@@markm0000 I have had the mid torque for about 2 years. The subcompact for about 8 months. I keep them clean and also add grease to the hammer cage when needed. The subcompact surprised me sometimes. Being able to remove exhaust manifold bolts off a 94 Duramax using a swivel socket at max angle.
@@xporthazymage6423 I think that says alot more about the swivel socket surviving that rofl, what brand do you use for that? lol
My first impact was a rigid and it took a lot of abuse before I switched to collecting milwaukee tools. The rigid fell off a second story deck onto concrete and all I did was reconnect the battery that flew off and she went for another year no problems.
I refuse to have more than 1 brand of battery and milwaukees got all the specialty tools I need.
It was gearwrench my favorite brand. I have use that brand for ratchets and almost all my hand tools. The warranty process is very easy and they are very good price. As for the battery platforms, I have four ryobi(drill), Milwaukee m12(impact driver), snap on (electric ratchets), and rigid (impact wrenches)
I got that green seesii kit on sale with a coupon for $120 and ive worked it hard on the rust buckets up here with no issues. Took off seized and rusted 19mm break carrier bolts after about 20 seconds and a pretty rusty but not as bad 32mm wheel bearing nut in about 15 seconds. Overall its come through for me and is compact enough to got into some tighter places where my other high torques cant fit. Also got an actual right angle made by them from a friend and it’s pretty awesome.
That's amazing
How’s it holding up mate, still working ?
@@jonsutyautomotiverepair1993 yes, zero complaints. Batteries work fine still too
@@AH6man I can also attest that the right angle is badass. Brought mine to the junkyard yesterday and threw it at a ton of stuff. 14mm to 17mm caliper bolts that were insanely rusted together, even tried some 20mm subframe bolts and sure enough it came through. It’s sweet for the wheel wells.
Gen 3 SeeSii: amzn.to/3O66lJo
Gen 2 SeeSii: amzn.to/46WkoZN
While capability is ever increasing, the price of name brand compact, mid-torque and high torques are outpacing inflation by 200% in the last 4 years (+36% vs +17%). And after all, those past models were big performance steps then too, brushless over brushed in many cases. So shout out to the little guys who help pump the brakes.
Right? Batteries here in Canada are absurd - I can get 2 generic "5AH" for 2/3 of the price of ONE ryobi unit at the name brand 'on sale' price! Don't even get me started on fancy brand packs! Pricing is really taking the piss these days.
Would love for you to test the new TD173 from Makita
When have the change
Can you test the Hypertoug 12v rachtes from wallmart????(looks very suspicious like the 12v Milwaukee 🤔)
Please do the seesii 1/2 inch right angle impact. I've had mine for 2 months and it is doing wayyyy more than I thought. I paid $70 with a coupon from Amazon and had a prime deal. I haven't had any problems. I use it for suspension work, engine, and sometimes lug nuts. It has multiple settings for torque built in...thank you for all the work you put in. My tool selection is based off from your findings. I appreciate "the bang for the buck" tool testing. America needs TTC
I bought the cheap mid torque at 96 + tax; if it works as demonstrated by ttc, it will save my back and weaking hand strength. If it get stolen, it's not much of an economic loss; far cheaper than my Milwaukee m18 compact.
Interested in seeing how the SeeSii right angle impact wrench and the new rigid ones stack up against the ones you tested before.
Okay
As a Midwesterner, every time I see green in the thumbnail, I get excited that it might finally be Masterforce. Then disappointment.
As a former Menards employee who's moved away from the "save big money zone" before they released their power tool line I'm also interested. Does their mid torque and high torque actually kick ass? Secondly you could share you option on the rebate program if a sale is going on at the time you order them online
Wish Milwaukee would switch to the ring light. As long as it doesn't introduce structural issues, I don't see any negatives.
Didn't it already with Gen 4? The 2855 has it too
@@saikyouabecorrect. The new gens went ring
@@evergreenrider I didn't realize. That's awesome.
Makita is switching too, looks like everyone finally saw the light on how practical it is.
In the case of the 2855 it's not a shiny glowing ring like this Ingersol Rand, just 3 discrete LEDs placed around the anvil. I would think a similar illumination effect though.
I DON'T use an impact wrench every day, and after you tested a SeeSii for the first time, I bought one. I don't know how it would stand up in a shop, but it's a way for a homeowner to justify a cordless impact, and (probably) not get burned.
just got my next gen kobalt mid torque a few days ago. I have had their old compact for like 7 years and it has done exceptional. been dropped into tubs of oil left out in the rain, tossed into dusty gravel and keeps on ticking. this mid torque is a beast and i got a "scuffed" model with a 4ah battery and charger for $180. cant beat it. and it took off a honda pilot crank bolt which is supposed to be very difficult. I'm impressed. honestly cant beat the kobalts especially when compared to ridged ryobi craftsman etc. even takes out some of the big boys but at way lest cost
Not a bad choice whatsoever! I got my dad into the cobalt 24 V max line about six or so years ago. He’s never looked back. He’s even thrown out/given away/sold off some of his old guns as he was starting to have a very eclectic group of chargers sitting on his workbench. he is all blue now. If you haven’t popped for it yet snag yourself that high torque XTR half-inch drive cobalt and there won’t be anything you can’t takeoff. Their 3/8 right angle impact is also a beast as well. Believe it or not. For the price, it beats my IR 5330 3/8 inch drive right angle impact. The cobalt has more torque, a brushless motor, and an LED light.
@@BlindMansRevenge2002 my brother has that right angle impact its so useful
It would be neat to see a Deep Dive on a top performing amazon brand, actual battery capacity, how the internals look, Amazon brand beating Ingersol Rand? fascinating times in tools!
Yes, I think the most important thing is, are the internal parts properly hardened, and do the batteries last at all? A lot of Briggs and Stratton lawnmowers for for decades used an aluminum cylinder bore with no cast iron liner but there was no way for consumers to know any different. Using the wrong metals or non-hardened metals can make something last about 90% less.
@@RitalieInternals would definitely need looking into, up to and including making sure the battery interface is safe to use (not going to overdraw a battery and end up destroying it, for example), but the pleasant upside of the SeeSii is that it's compatible with Makita's LXT batteries so if the generic sketches you out you can get a name-brand juice box.
Seems the SeeSii didnt flat the curve at the end... if you give it 30 sec would there be any more performace to gain?
Would love to see the other Seesii models tested. To my knowledge, they currently have an 3/8 impact, 3/4 impact, 3/8 ratchet, and impact driver.
Just because it’s cheap doesn’t mean it’s poor quality, it could be stolen tech. Stealing the tech means the manufacturer doesn’t need to pay for all the R&D.
I have a gen2 seesii and I'm super happy with it. Does the job!
I would love to see a socket comparison. Similar to how you tested wrenches
I would love to continue the "Do they suck?" series where you keep buying amazon knock offs of tools to see which ones are worth buying and which aren't.
Throw in a long-term survival report and I'm sold!
Seeing the big names being taken down a peg is something I love about this channel.
You don't turn wrenches for a living...
Awesome content. I'm probably over-indexed on having as few different chargers as possible, but have a lot more information to offer a recommendation to friends who want to get something for very-occasional use. I can't tell them to buy my Milwaukee Mid Gen2 because even though I love it, the value-for-money equation doesn't close for them. Lately I've been sending them to HF, but maybe SeeSii...
I've been liking all of the Hercules stuff I've bought from HF over the past year or two. Even if some things don't perform the same I feel the build quality is just as good as DeWalt or Milwaukee IMO. :)
My biggest gripe with something like the ir or a snapon is the specialized batteries. Meaning that you can’t just go and buy the tool itself and add it to your collection of other tools that share a common battery, charger, etc. That’s the main reason I’ve gone to Milwaukee. The battery and charging station for my high torque impact is the same for my leaf blower, skill saw etc…. Having 6 different brand chargers is kind of annoying, especially in a limited garage space. I recognize that Milwaukee doesn’t always top the charts in every category, but at least I only have 2 chargers to run all of my cordless tools and I can buy just the tool when Im in need of adding one to my collection.
I have no intention of upgrading from my fake Makita but I love watching these videos. My fake Makita pulls off lug nuts from my Honda Jazz and came with 2 batteries for about £60 ($80?)
EDIT: I see now you've included the fake Makita. Still happy with it for the money for what I need it for. I think that was how I found your videos when I was looking at the fake ones, to think that was a year or so ago and been watching all of your videos since.
One ofthe best Tools Testing Chanel!!!
Honestly I'm really happy to see a fly by night Chinese manufacturer make a good, competitive product at a competitive price like this.
I find it funny how the SeeSii seems to use whatever food coloring they had laying around that day to drop into the plastic mix. Red case, green mid torque, blue high torque, etc.
You just had to add that line "lets see what the new SeeSii Sees"
Nice.
Love my blue SeeSii 1/2 inch. Have been using it basically every day almost since the first Amazon impact video came out. Have opened it up and replaced the grease a few times but that's it. No problems whatsoever and it's been dropped quite a few times. Next purchase is going to be one of those Onevan 3/4 impacts with the metal housing. That one looks too nice to pass up. And takes the same Makita batteries as all of the other no-name tools. That's what I like about them. I have a million of those Makita LXT packs and the various knockoffs that come with different tools. Because all of them take those batteries, I can buy whatever brand and use my existing huge stash of batteries.
I don't remember you talking about it, but the smoothness of operation under load looked a lot better on the IR in this lineup. To be fair, a Makita probably would've looked similar... I've always been somewhat of a IR fan even tho i run Milwaukee
I have both the standard and compact SeeSii and they work very well. They seem to have sizing issues on the steel ring that locks the sockets on and that can be very frustrating when new. But I suspect the real penalty for "cheap" is likely to be in the battery cell quality. We all know that genuine battery packs from names like Milwaukee are heads and shoulders above the generic Ebay replacements. I worry that the Seesii probably comes with generic quality cells. But I guess if it becomes a significant problem, rumor has it that Makita 18V LXT packs will fit.
Do a video of the winners of each category, then show what adaptors to get if you don't want to be forced into having multiple battery platforms
W
If you're using adapted batteries you are not getting the performance demonstrated here.
If you only want one battery format, buy Makita because all the West Taiwanese brands use that battery.
@@Hansengineering Using a 20v Hercules/Bauer/Dewalt battery to Milwaukee tool adapter on a Hole Hog actually preformed better with a Herc 5 AH than the Milly 5 AH
That SeeSii is actually quite impressive… not sure how long it will last but impressive.
It will probably last at least 30 days...
Would love to see how the bauer 1/2 and 3/8 brushless impacts do!
Which 1/2" model? Because TTC has already tested the big brushless high torque Bauer already. The brushless mid-torques are pretty much just red Hercules models and they already tested the Hercules a while back. :)
GREAT KNOWLEDGEABLE VIDEO, 100%.
I can't afford the M18 line so I stick with the 18vRidgid platform and M12 platform. All my ridgid tools have been great to me.
I now almost wanna get a SeaSii one as i'm using the makita 18v system but my 1/2" is an older 280nm model.
If it was available as a stand alone tool i probably would have ordered one.
Love the channel, thank you. I wouldn't mind if you added if these brands are American/Canadian or Chinese owned and where the tools are made. I didn't realize Milwaukee is straight Chinese now.
Another great video. I personally try to stay with the brand that I have a bunch of batteries for, and seem to be decent overall. The off brands even if I didn't have a bunch of the one brands batteries, I would tend to stay away from for 2 reasons one would be everytime in the past that I purchased no name or lesser name cordless tools the batteries never seem to last very long. The second issue has been the price of replacement battery packs usually ends up costing 80% of what the tool costs. I had some early skill and Ryobi stuff that got lightly used around the house and only lasted a few months do to junk battery packs. I don't know about skill but it seems like Ryobi has come out with much better stuff now then when they started out. Keep up the great job with the videos.
These use Makita LXT packs though, as a nice backup
Correct. I will never buy a Ryobi tool again, because I bought some of their tools in the past and their batteries died basically after a few charge cycles. I consider that to be theft, and dishonesty. Modern batteries in the cheaper tools are probably a lot better. I've noticed that the more expensive tools are all UL listed. And really, I've realized there is no reason not to buy into another brand now, because the big brands have such good batteries, the batteries last 10 years now. If you buy a Dewalt drill with a high capacity battery, you only need 1 battery for the next 10 years. I use tools daily at work, and my Milwaukee M18 "4.0" batteries are still going from 2014. I recently bought Flex power tools, because their circular saws are the best on the market. Milwaukee just doesn't have anything that can compete, in terms of build quality. So sometimes it's necessary to buy outside the brand.
What you have experienced is the difference between lithium batteries and ni-cad, etc batteries. I have a like new Ingersoll Rand 3/8 impact that has garbage ni-cad batteries caused by a lack of use. The batteries discharge fairly quickly when sitting and constant full discharge is very hard on the cells.
Lithium cells have a very low discharge rate when in storage, as well as containing more energy.
I also have a lot of old Hitachi and DeWalt ni-cad tools that are in excellent condition but have garbage batteries, I loved the tools but hated constantly replacing batteries. Then I have 18v Bosch lithium battery tools that see constant use and I haven't had a single battery fail in 10 years. I bought my Bosch tools back before the bare tool days so each tool came with 2 batteries, and on deck jobs in the heat of summer having a dozen packs cooling and charging keeps the work flowing. Now with bare tool sales only it costs a fortune to have that many batteries.
Awesome video! That Seesii performed well! IR, not so much...
I feel we've been lacking on the special treat that is DP. It's not for everyone, and it's probably best not to have DP all the time. But it's a nice surprise to have DP included
You definitely never forget the first time you get DP’ed 😂
I just had to say thank you for all this Priceless information.
Hi, recently found your channel and have been really enjoying the qualitative and quantitative testing you provide. I haven't bought into a battery ecosystem, got an ancient DeWalt drill driver from before things had common batteries. I'm looking to get a 3/8 impact wrench for home garage work (I don't deal with much over 150Nm tight, think a 3/8" should be plenty?) but would like to also get a drill driver from the same battery system. Could you make a recommendation for which impact wrench model/ecosystem would be best to get? Thanks!
Great study as always
"Let's see what the new SeeSii sees."
Well played, sir.
SBD holding back Craftsman so they don't take market share from Dewalt, but TTI lets Rigid go nuts.
I think Ridgid kinda got the warning flag with the Octane line since it met or exceeded M18 Fuel performance so they've cut it back a little bit, but they are still a decent tool at a good price
Their latest subcompact stuff is quite good for size vs performance
And snagged the Craftsman Brushless when Lowes put them on Clearance before the "R+P" rebadging. For $60 they've been great .
The good old Amazon Blushress motor impacts.
I bought a SiiSii and threw it in the back of my truck. It's more convenient than dealing with basically anything else. At under $100 that's a no brainer.
I love to see these types of tools make the reviews. The difference between the "chinese" brands and the others is usually mainly quality control, they're all made in china but some get better checks.
Ridgid has had package deals that got the mid torque impact below the SeeSii cost. Plus the Ridgid lifetime warranty if you register right away. Just a heads up for anyone who has patience and doesn't need something right away.
Those sub compact ridgid guns are insane but I ran through three In a year as a automotive mechanic! I’ve been a ridgid lover but their quality is taking a steep decline in my opinion. I’ve been leaning towards the yellow shelves and have been seriously debating the switch from ridgid to dewalt which all the other guys at my work have had for years and abuse and they still last!
By the looks of your comment And a lot of the other comments in these types of videos. It doesn’t seem like Ingersoll, rand guns are floating around a lot of mechanic shops. I wonder why that is?
Really appreciate your channel for the thoroughness it does. What would you suggest for a 1/2 impact wrench for home garage use. It would occasionally change tires and do rusty suspension work.
Dewalt mid torque dcf891
TTC is back! Last Friday seemed a little emptier than usual. But this Tuesday is going to be amazing! 😁
Wow!! 😮😮 I'm loving that Ring Light. ❤❤❤
After seeing more tools like the Hercules with the hammer drill a couple months back iirc. It's music to everyone's ears seeing stuff like this.
For as much as we like to assume that we "will 100%" be in need of a warranty, everything else from performance to longevity so far just shows the big brands are just that. Brands, like a your common 5$ white/blank t-shirt, with a supreme logo that retails for $50. MW can put lipstick on a pig & here we have SeeSii atleast catching up & giving them a nice slap on those rosy and fairly hairy cheeks. (lol)
A mixed bag is what I think most people will gladly embrace, which is to say just whatever tool is "best" for their specific application, and fill their 'in between tools' with honestly a mix of again, Hercules, some Amazon, some Dewalt (their prices are great on amzn, more often than others on HD). 😅 & the best part is, we can look back years from now and see if that warranty meant as *much* as companies like to ingrain in our consumer-psyches, by the results of hundreds of tools used/abused and compared to their, 'top shelf' constituents. This too, includes harbor freight stuff, which is exciting actually.
To this end I hope my autocorrect didn't butcher most of what I tried to write :/
Can you test some Parkside performance tolls please? 🤔You are the best!! 🙂 🥇 🔝 🔝
I might be missing it, but have you guys tested the big right angle stuff like the DCD440 or holehawg?
Thanks for your content!
How do the different prices comapre when it comes to quality and material choices? Like type of plastic and hardened versus not hardened?
Ergonomics if you use them every day?
Seesii has a 3 year manufacturer's warranty.
great video as always
You should try testing headlight bulbs.
All the amazon brands
HID and LED too
You and Project Farm make some great content.
You mean project failure. That guy is an absolute clown.
I have an odd question but it deals with my ARP 625 head studs. So is it possible to use break away torque to get a general idea if a head stud was properly torqued in the first place? My head studs are to be torqued at 30 ft lbs then 60 ftlbs and last at 90ft lbs in that order and in a pattern. Well my passenger side head studs broke loose at about 90ftlbs and the driver side broke loose at 58ft lbs so could I suggest that the driver bolts might have skipped the final 90 Ft lbs torque iteration? I won’t post the whole story but my car is at a shop being diagnosed currently and this is the info they found and I’m just trying to get some input because it’s very important thank you for your time.
I would love to see a comparison of all the tools seesii makes against the competition on Amazon, and against the diyer brands!
I know Ryobi isn't anyones favorite brand but i've been slowly replacing my tools with them. good 3 year warranty on their tools and i mostly buy on their "buy a battery get a free tool" days or just outright buy the tool. in my eyes it's a decent value. picked up 3 drills (tool only) used for $50. they were used and I won't use them too often anyway but it's great to have them on hand.
Actually he's rated some Ryobi very favorably. This P262 could be had for $75 right now with Ryobi Days hack. th-cam.com/video/RRhX0b6zNtk/w-d-xo.html
And got this PCL265K1 kit for $99 with a 4Ah battery, charger and 3/8" ratcheting wrench as Free tool. th-cam.com/video/_JcATMLjRpY/w-d-xo.html
Looking for a solution to swapping over 4 wheels every year from winter to summer. Idc if it's battery or wired but I want to do the job more easily and on a budget. Do these do the job you think? Without having to charge half way through.
Any interest in testing the big 2865 7/16" driver? Or a modded one?
home depot had the dcf921 with a powerstack battery for $189 I was going to get it but I have no use for a 1/2, I love my dcf923
What are the best options for changing a 5th wheel RV Tire?
I would like to know how long they hold up to use ,and does power stay the same
Was wondering if youd ever test the m18 compacts with HO m18 batteries just to see what kind of beans itd make? I use my 2855 with my 6 ah HO battery and it hits a lot harder and definitely has more torque than with the 5 ah. Im just curious how much more power? 🤔
Hey mate, could you test the Aeropro AP9515? the 1/2" stubby or do we know what design it is?
if I sent you 410a and 134a refrigerant leak stop can you test them to see if they really work in Hvac systems ??? It will be very interesting and save money? Theres like a punch ac leak freeze and etc but idk how you would do it ? Small system?
I like the packaging on the ir impact.
nice video mate!I got the same chinese made see sii impact wrench with another branding for 70 bucks,and its lasted me a long long time!Also,did you know that the see sii batteries match with the original makita 18v batteries??
Hey, in the last time Im looking for some Inspection cameras for a low budget(under 50 bucks) and with a built in screen. What I found is that some say those cameras are useless oftentimes for automotive work because of light and camera quality and some break quite quickly. Also I found that you cant find reviews for those cheap ones or generally tests. Maybe you could test those cameras, but than probably with a wider price budget…
Please test the Porter Cable mid and high torque wrenches from Tractor Supply Co.
That Seesii was STILL climbing too! Sheesh!
Why is the new seesii WH750 currently unavailable to purchase at Amazon? Does anyone know?
I paid $89. for my SeeSii WH750 after using a discount SeeSii gave me and CC points. At this point, I couldn't be happier with it, but I've only used it twice so far. Gotta big car suspension repair coming up this summer, so we'll seesii how it does. Also need to mention that it comes with their new 5.0Ah battery, but who knows if that's bs. It looks and feels just like their 4.0. The only let down was the blown molded case which looks generic and only the battery fits well. Everything else flops around. I totally modded my case to hold everything more securely along with adaptors, extensions and whatnot. I think the Seesii impacts works exceptionally well the DIYer and would be fine for a pro in some cases, like being a backup while waiting for a warranty repair of your Mil or DeW. Just don't drop the mofo.
IR currently showing at $399 on their amazon store but with a 3 year warranty. Pros will appreciate the warranty and parts support and write off the cost.
Hey man. Can you test out the New Hyper tough 12v 3/8 Brushless impact wrench. They seem pretty decent.
I'd consider the seesii as a tool to use occasionally, if they sold it as bare tool. Doesn't seem too bad.
I bought into the Rigid ecosystem when I first got into powertools. Life Time warranty on all their stuff, free battery replacements etc. The odds of something breaking are always slim, but on the off chance a battery goes dead, or a tool breaks.. it's nice to know I'm not going to be out 100+ bucks to fix it. Are they the BEST tools out there, no. But for the price they are hard to beat.
Try out the Metabo 3/4" impact, I think it would be a good test.
would love to see you do some more hilti tools in your vids
would you or have you tested the Milwaukee 2663-20 vs the 2767 high torque?
Hilti just dropped a 22v hammer drill and Impact! Please get them on here! They're going for a hefty retail price of $750 as a combo kit with two 4ah batteries, a charger, and a bag at home Depot, I'm super intrigued to see the numbers they put out!
They're boasting a 2 year wear and tear warranty with a 20 year defect warranty!!!
Can you do the new snapon 9038 impact vs Milwaukee/ matco /dewalt
That Seesii isn't a bad knockoff of the Makita XWT17z for its price, but I've really put my genuine one through the wringer and it feels like new
I've noticed a BUNCH of Chinese brands building some kind of knockoff/ghost shift Makita stuff lately.
Out of curiosity... Since you all started this channel, how has it impacted (lawl) everyone *_in your shop,_* in terms of who uses what?
- Have some changed brand loyalty?
- Have some who _were_ loyal, now only seek the top dog, regardless of brand?
- Have some become a bit grumpy, sticking to their beloved brand *despite* the evidence showing that it's _not as great_ as they always proclaimed? ...Maybe even going so far as quitting? _(I'm _*_sure_*_ there are people like this! lol)_
Been anticipating a video since Friday morning man 😢😁
Same, I was going through withdrawal hahah
There's performance and then there's reliability. Cheap amazon tools might perform like higher end tools when new, but for how long?
With trade brand impacts being used on F1 wheels (during practise sessions) is it a surprise that mid/prosumer level tools are getting up there? Or is that not really a meaningful metric?
I don't know if you'd see this since it's been 9 months since upload, but featuring one of the Klein impacts in your videos would be cool
it would be cool to see a 12v tool shootout including makita and milwaukee as ive been looking at them for a compact tool set for my mx5 other brands would be cool
I wonder if a real Makita battery fits on the Seesii. And if so what torque
I might have missed it but more amazon stuff like drills, etc. Budget guys need decent tools as well.
I have a Nichilas impact wrench but I don’t see a video of it on TH-cam
So from the video would you say the gen 2 for 90 or gen 3 for 130?
I have 3/8” dewalt and the 1/2” See. When the dewalt will not break it I pull out the See and it kicks butt. Too bad the dewalt 1/2” is so expensive