For those who are looking for the product link, here it is: RO filter Set - Amazon US amzn.to/3Zyb2Q9 RO filter Set - Lazada PH c.lazada.com.ph/t/c.YKnGKS
Leaks or popping out could be caused by overpressure or perhaps the materials used. In my videos, I am still using the same hose for the past 2 years and never had leaks or popping out nor replaced any.
Nice well exlained... dear i have lost the low pressure and solenoid connection and pump connection of this filter... please will you make a separate video on these wire connections.
Hi Amir, I have received my unit already pre-assembled on the wiring connections. Can you please elaborate the problem and I maybe could help you out with that.
@@AmirKhan-nk3dx Hi Amir, thanks for the idea. Sure i can do that. But i have to do some research first and i am currently doing another video, so please give me some time.
Hi sir, thanks for the tutorial! Have some questions: 1. The RO we have has no flushing mechanism, would you know how we can help maintain po our unit? 2. Once plugged in po, does the water drain continue flowing? 3. Should the unit be constantly plugged to the power outlet or every when lang po dapat?
Hi Emmeline, do you mean your system does not have a flushing valve? In that case, you can do manual backflushing. Backflushing means you have to reverse the flow on the RO membrane. Try exchanging manually the hoses for the inlet and the waste water hose on the RO element and then plug in the power cord, and run the system throwing away the water produced for a few mins. Then, place back everything back to original after backflushing.
The system has an auto start and stop mechanism, so it should be plugged in constantly. Draining only happens when the pump is running, you should check the drain hose regularly, normal drain ratio is 1:2 (clean : waste)
You can check the efficiency of your system by using a TDS kit comparing water before and after RO filters. Available online. Or you can also add UV sterilizer on your system para sigurado. You can check my other video. I hope this helps. And oh, please dont forget to subscribe. :) salamat.
Watched your video, it is really helpful, I purchased RP system without storage tank, so I think the yellow line (connection) is not needed and I just connect the 5th stage output to RO faucet , right sir ?
Hi, thank you. The last stage is the Post Carbon filter, it helps the product water tastes better. You also have an option to add extra filters after the 5th stage such as mineralizer and alkaline filters and UV as well.
Jong, I have a question for you. Could you please help me connect the microcomputer to RO system? Where to connect the feed water solenoid valve and flush solenoid valve?
Hi Artur, what type of system do you have? Not sure if these have microcomputers, maybe do you mean pump? And mine dont have solenoid valves, just normal ball valves. But the flush valve is normally connected on the inlet and outlet sides of the restrictor valve in parallel if you have one.
Hi dear !! Im interesting to buy RO System machine 6 step but i need to get advice if can work with input water of 7000 microsiemens to produce less than 500 microsiemens as output
Hi, well that is technically a bit dirty water. The RO can drop 7000 to 500 as it should be but your filters will have a shorter lifespan and needs to be replaced earlier. My recommendation is to add extra pre-filters before your main RO system, with atleast 1 washable mesh filter on first stage, it will save you a lot on maintenance.
What if there is no such thing as flushing valve, to flush once a month, the pipe that goes out o membrane to drainage has similar small cylinder but thats it. There is no pipe around that small cylinder. Maybe I should buy additional parts and create one?
Hi @VaidasJSP, that cylinder you mentioned is the flow restrictor valve. Its the one that controls or restrict the amount of the waste water discharged. Creating a bypass valve is a bit complicated with some additional parts, but it wont be a problem if your a handyman. But if not, I suggest that you just replace the drain hose with an extra plain hose when draining and return back the original drain hose with the restrictor. This is way more simple. Just be sure the system is off and no pressure when doing this.
Yes, you can use deep well water but the system wont run if your supply pipe is not pressurized. It can be solved by stocking water on a tank supplying to RO filter by gravity.
Hi @raulrojas8713, there might be some valves you forgot to open, or perhaps forgot to close waste water valve. Please check out my other video how to replace filters, below. th-cam.com/video/XzgWwpmWzdg/w-d-xo.html
Hi, the original water tank capacity is 3.2 ltrs, but I normally get 2.5 to 3 ltrs until pressure is out when power is off on my last test. So if you have a higher consumption, then it i highly recommend to add extra tank. Please check out my other video how. th-cam.com/video/dONc8GzQhKY/w-d-xo.html
Hi, that is the flushing valve, you need to open it regularly for a few minutes to flush out and reduce impurities in your RO membrane, otherwise, efficiency will drop and be clogged faster.
Please double check for correct hose line-up, just follow the diagram on my video. If all is correct and water is coming out of RO faucet then, the possible causes could be: tank valve is closed/blocked; or the theres a problem on your tank's bladder/diaphram. Please note that tank will take atleast an hour to charge.
No need, the pump has a pressure switch. It will stop if your system reaches 70 - 80 psi and it will also not start if your water supply pressure is below 10psi if i remembered correctly.
Hi John, im sorry but I also just purchased this personal product online on my country. Im sure you have some online shopping platforms in your country. Or you can try at Aliexpress from China directly, or Amazon from US. Just try to check comments and testimonials of products first.
Hi, sorry for the late reply. I bought it at Lazada. Cant find the original link but here's the updated one. www.lazada.com.ph/products/5-stages-75-gpd-reverse-osmosis-residential-reverse-osmosis-complete-set-up-ready-to-install-easy-to-install-water-purifier-water-filter-i3137238186.html?spm=a2o4l.searchlistbrand.list.77.5f5e3ebeDy3hig
Hi, sorry for the late reply. Can't really recommend any brand, most suppliers nowadays have their own brand but ironically comes from the same manufacturer. What I can recommend is to purchase it from a local physical store that offers a warranty, if not look for an online store with a good rating and with real and good product reviews.
Hi, could be few reasons. But try to double check if hindi nagkabaliktad ng kabit yung waste water hose at yung clean water hose. Another cause could be a faulty restrictor valve or baka bukas yung bypass valve.
Hi, I bought the unit at Lazada. The store's name is H20 Restore, seller is highly recommemded with good reviews. Not advertising and no connections with them, just sharing.
For those who are looking for the product link, here it is:
RO filter Set - Amazon US amzn.to/3Zyb2Q9
RO filter Set - Lazada PH c.lazada.com.ph/t/c.YKnGKS
This is the best RO installation video so far
Thanks, I'm happy to hear that.
Merci beaucoup 🙏 enfin un schéma de montage clair ! et les explications sont 👍 merci également pour les sous-titres en français 😊
Thanks sir i just want to follow you in other to move freely on this journey sir
I have a question in my experience every time I used in the past plastic piping it would eventually leak and pop out so I always use the flex hose ?
Leaks or popping out could be caused by overpressure or perhaps the materials used. In my videos, I am still using the same hose for the past 2 years and never had leaks or popping out nor replaced any.
i m from pakistan thank you brother ❤❤❤❤ good job
Thank you for the demonstration sir.
You're very welcome, im glad you liked my video.
Good demonstration. Thank you Sir
You are welcome.
Nice well exlained... dear i have lost the low pressure and solenoid connection and pump connection of this filter... please will you make a separate video on these wire connections.
Hi Amir, I have received my unit already pre-assembled on the wiring connections. Can you please elaborate the problem and I maybe could help you out with that.
@@jongpenaranda please share the pre assembled wiring video and also explain its function... as u will be the first to share that on youtube.
@@AmirKhan-nk3dx Hi Amir, thanks for the idea. Sure i can do that. But i have to do some research first and i am currently doing another video, so please give me some time.
@@jongpenaranda ok thanks.
Hi sir, thanks for the tutorial! Have some questions:
1. The RO we have has no flushing mechanism, would you know how we can help maintain po our unit?
2. Once plugged in po, does the water drain continue flowing?
3. Should the unit be constantly plugged to the power outlet or every when lang po dapat?
Hi Emmeline, do you mean your system does not have a flushing valve?
In that case, you can do manual backflushing.
Backflushing means you have to reverse the flow on the RO membrane.
Try exchanging manually the hoses for the inlet and the waste water hose on the RO element and then plug in the power cord, and run the system throwing away the water produced for a few mins.
Then, place back everything back to original after backflushing.
The system has an auto start and stop mechanism, so it should be plugged in constantly.
Draining only happens when the pump is running, you should check the drain hose regularly, normal drain ratio is 1:2 (clean : waste)
You can check the efficiency of your system by using a TDS kit comparing water before and after RO filters. Available online.
Or you can also add UV sterilizer on your system para sigurado. You can check my other video.
I hope this helps. And oh, please dont forget to subscribe. :) salamat.
Very well explained
Glad it was helpful!
Watched your video, it is really helpful, I purchased RP system without storage tank, so I think the yellow line (connection) is not needed and I just connect the 5th stage output to RO faucet , right sir ?
Yes, that's correct. And if your 5th stage inlet has a T-connector then replace the yellow hose with a plug.
I have the same system but with out the water tank where to I connect the pipe that goes to the water tanks
Best tuto, thank you very much !!! Great help
Glad you liked it! Thanks.
Est ce que je peux avoir le vidéo en français s'il vous plaît
Thanks for an amazing and very informative video!
You're welcome. Glad you enjoyed it!.
hi po! this is a very helpful video, ask ko lang po sa diagram ano last stage ng filtration after RO membrane?
Hi, thank you. The last stage is the Post Carbon filter, it helps the product water tastes better. You also have an option to add extra filters after the 5th stage such as mineralizer and alkaline filters and UV as well.
Jong, I have a question for you. Could you please help me connect the microcomputer to RO system? Where to connect the feed water solenoid valve and flush solenoid valve?
Hi Artur, what type of system do you have? Not sure if these have microcomputers, maybe do you mean pump?
And mine dont have solenoid valves, just normal ball valves. But the flush valve is normally connected on the inlet and outlet sides of the restrictor valve in parallel if you have one.
Hi dear !! Im interesting to buy RO System machine 6 step but i need to get advice if can work with input water of 7000 microsiemens to produce less than 500 microsiemens as output
Hi, well that is technically a bit dirty water. The RO can drop 7000 to 500 as it should be but your filters will have a shorter lifespan and needs to be replaced earlier. My recommendation is to add extra pre-filters before your main RO system, with atleast 1 washable mesh filter on first stage, it will save you a lot on maintenance.
What if there is no such thing as flushing valve, to flush once a month, the pipe that goes out o membrane to drainage has similar small cylinder but thats it. There is no pipe around that small cylinder. Maybe I should buy additional parts and create one?
Hi @VaidasJSP, that cylinder you mentioned is the flow restrictor valve.
Its the one that controls or restrict the amount of the waste water discharged.
Creating a bypass valve is a bit complicated with some additional parts, but it wont be a problem if your a handyman.
But if not, I suggest that you just replace the drain hose with an extra plain hose when draining and return back the original drain hose with the restrictor. This is way more simple. Just be sure the system is off and no pressure when doing this.
U have not connected hp switch and nrv to cut supply of pump when stroage is full and no asov in the system
The system I bought came with pre-assembled hp switch and nrv, its not visible but it is located next to the pump.
Can you use water source from a deep well?
Yes, you can use deep well water but the system wont run if your supply pipe is not pressurized. It can be solved by stocking water on a tank supplying to RO filter by gravity.
Good
Thanks
The technician left the waste water running for 24 hours. My monthly water bill is very high. What is the solution?
Close or control the bypass valve (if installed).
But if not, you need to install a restrictor valve on the waste water outlet.
Hi we replace the filters but we don’t have water on the faucet what we can do it thank you
Hi @raulrojas8713, there might be some valves you forgot to open, or perhaps forgot to close waste water valve.
Please check out my other video how to replace filters, below.
th-cam.com/video/XzgWwpmWzdg/w-d-xo.html
Good job
Very much appreciated.
What about the range
How many liters can u get until there's no water coming out?
Hi, the original water tank capacity is 3.2 ltrs, but I normally get 2.5 to 3 ltrs until pressure is out when power is off on my last test. So if you have a higher consumption, then it i highly recommend to add extra tank. Please check out my other video how. th-cam.com/video/dONc8GzQhKY/w-d-xo.html
Hi in your diagram, whats that thing above the flow restrictor?
Hi, that is the flushing valve, you need to open it regularly for a few minutes to flush out and reduce impurities in your RO membrane, otherwise, efficiency will drop and be clogged faster.
Nice
The black is what
Sir ano po kaya problem, hindi po kasi nagkakarga ng water sa mini tank. Thank you
Please double check for correct hose line-up, just follow the diagram on my video. If all is correct and water is coming out of RO faucet then, the possible causes could be: tank valve is closed/blocked; or the theres a problem on your tank's bladder/diaphram. Please note that tank will take atleast an hour to charge.
Whats the ph of the water at the end of this video ?
Merci
lods kelangan tlga hugutin yung water pump lage?
No need, the pump has a pressure switch.
It will stop if your system reaches 70 - 80 psi and it will also not start if your water supply pressure is below 10psi if i remembered correctly.
Why is only 5filtters hete
Hi my name is John Amandeh mensah from Ghana please I need some of your revers osmosis where can I jet some in Ghana ?
Hi John, im sorry but I also just purchased this personal product online on my country.
Im sure you have some online shopping platforms in your country.
Or you can try at Aliexpress from China directly, or Amazon from US. Just try to check comments and testimonials of products first.
Is main kia information the????
San mu nabili ung buong system Sir?
Hi, sorry for the late reply.
I bought it at Lazada.
Cant find the original link but here's the updated one.
www.lazada.com.ph/products/5-stages-75-gpd-reverse-osmosis-residential-reverse-osmosis-complete-set-up-ready-to-install-easy-to-install-water-purifier-water-filter-i3137238186.html?spm=a2o4l.searchlistbrand.list.77.5f5e3ebeDy3hig
What brand is that
Hi, sorry for the late reply.
Can't really recommend any brand, most suppliers nowadays have their own brand but ironically comes from the same manufacturer.
What I can recommend is to purchase it from a local physical store that offers a warranty, if not look for an online store with a good rating and with real and good product reviews.
But if you're from PH and wants same product, I can give you the link.
hi po, ang problema ng unit namin ay lahat ng tubig dumideretso sa waste water, di pumasok sa tanke, paano po ba to ayusin? thank sa sagot
Hi, could be few reasons. But try to double check if hindi nagkabaliktad ng kabit yung waste water hose at yung clean water hose. Another cause could be a faulty restrictor valve or baka bukas yung bypass valve.
@@jongpenaranda thanks po, ok na gumana na yunh unit.
San mo po ito nabili boss?
Hi, I bought the unit at Lazada.
The store's name is H20 Restore, seller is highly recommemded with good reviews. Not advertising and no connections with them, just sharing.
May I have your contact information?
Yeah sure. Please contact me at:
jongpen777@gmail.com
Hi Please send me the email I want to know you I am a technician in water treatment. Thank you
Hi, sorry for the late reply.
My email has been showing there on my ABOUT page.
Please feel free to send me email.
Hi Please I can't find the mail
You live in Boston
You live in boston
@Youssef EL HASSAKI No mate, I'm across the globe away. :)
How can I help you?