U r idea was awesome ..instead of soldering bulbs I took the old indicators and simply tapped it with wire and connected it with the new indicators.now it is working fine.i did it without any help from mechanic based only on your idea . thanks boss
Just put 220ohms (0.5 watt or 1W) resistor between indicator wire and ground. Follow the same way he did, just put resistor in the place of halogen bulb.
That can be done too, but the problem with that is heat, bare resistors heat up a lot, and that may result in melting of plastic parts or other wirings.
Bhai maine b ye he flasher dalvaya hai maine on off ka button bhi lagwaya hai lekin jo flasher ke mod hai vo apne aap he change ho jaate hai bina butoon on off kare mtlb bike chlte chlte apne aap he mod change ho jate hai Ye problem hai ya flasher mai automatic aapne aap he mod change ho jate hai 😩😩
@@EzMeck bro is there any other method? I have Gixxer SF 250 and recently installed simtac hazard flasher and indicator LED bulb. All 4 indicators are on as in the video. Should i purchase relay, will it solve the problem?
Bhai koi problem nahi hoga na wiring me...... Meri xpulse 200 T vehicle hai usme led indicator install kiya lekin wo kaam nahi kar rahe aur isme flasher bhi nahi hai direct wiring hai.... show room wale bol rahe hai meter board me flasher hai bolre lekin nikal nahi sakte usko..... ....
Led indicators can not create enough load so that the flasher relay could work, hence we need to connect one bulb on each side of the indicator to create load,( the resistance inside the halogen bulbs will create a voltage drop hence create a load).
U r idea was awesome ..instead of soldering bulbs I took the old indicators and simply tapped it with wire and connected it with the new indicators.now it is working fine.i did it without any help from mechanic based only on your idea . thanks boss
Appreciate that
Just put 220ohms (0.5 watt or 1W) resistor between indicator wire and ground. Follow the same way he did, just put resistor in the place of halogen bulb.
That can be done too, but the problem with that is heat, bare resistors heat up a lot, and that may result in melting of plastic parts or other wirings.
This is absolutely genius. Why waste 200 bucks. Gotta try it
@@aflahaliafi1898 we did this and the old relay gone
Bro led flasher lagaya fir bhi bike ke charo indicators flash kar rahe hai..left use Karo ya right wala..4ro flash hote hai
Bhai meri bike me Chaaro indicator 1 saath jal rhe hai...koi solution
Ye video kis liye hai fir?
Broo thankyou...this really helped mee...u are a genius!
Do you connect two bulbs? One on each side.
Yes, one 10 watt bulb in each side.
@@EzMeck Thank you ;)
Nice bro it's realy help for me thx bro
Can we use hazard lights after installing this?
If your hazard module supports the wattage. Yes.
@@EzMeck can you say where to connect that bulbs i can't understood
@jollyroger72600 watch again, you will know
bhai pattern relay laagne par chlyyga kya patern
Ha chalega.
Thank you sir for this it was really helpful for me....
Pleasure is all mine.
You are genius
Bro your solution was awesome but i have to ask one thing the bulb inside the seat will heat up , do it will create trouble ??? Pls reply
Its there for almost 5 years now, no issue till date. Just make sure to insulate the bulb, i used head shrink tube over the bulb.
@@EzMeck will consider thankyou so much bro
Thanks bro can u tell me about for Honda shine
The same process will do.
Thank you very much sir 🥰
Bhai maine b ye he flasher dalvaya hai maine on off ka button bhi lagwaya hai lekin jo flasher ke mod hai vo apne aap he change ho jaate hai bina butoon on off kare mtlb bike chlte chlte apne aap he mod change ho jate hai
Ye problem hai ya flasher mai automatic aapne aap he mod change ho jate hai 😩😩
Mera scotty mein ktm indicator double light Jaal raha hai.. please help..
Use the method shown here. Will solve the issue.
@@EzMeck thanks broo... It's working.... Thankyou so much 🙏🙏🙏🙏🙏🙏🙏🙏
First viewer.
Perfectly working but flasher relay is out of stock in amazon
I want that
Thanks my problem resolved
thank you bro❤
Thank bro 😢
Thank you so much brother ☺️
Welcome
Bhai flasher link digiya
Thanks bro ❣️
Bhai mene bhi ye signal lagaye he CD100 me lekin charo char signal sath me blink ho rahe he muze one side TURN vala kaise karna hoga plz batao
Ye method try kiya hai?
@@EzMeck no BROTHER
@@BornTowin132 then try this process, this will solve the problem.
@@EzMeck ok bro thanks ❤
To apny flash ky sat bulb ha
Ya
Flash ky jaga bulb lagaya ha
Bulb ko led k sath connect karni hai, taki flasher me load create kar sake.
@@EzMeck thank for feed back
For Pakistan 🇵🇰😘🇮🇳
Bhai detail me explain karo
Kya Idea he...bro..but name pe thoda changes kardo to video log jyada dekhe....name pe ktm indicator or indicator ka image lagado....bro log dekh sake
Ok bro, thanks for the idea.
Thank you ...it worked
bro Mera Charon indicator Jal Raha Hai uska solution Kaise theek Karen
Flasher change karne she hoga
Nehi hota hai kabhi kabhi.
Right switch karne she 4 light jalraha hai or left karna she 4 light jal raha hai or speed blink ho raha hai iska koi solution bataiya
@@EzMeck bro is there any other method? I have Gixxer SF 250 and recently installed simtac hazard flasher and indicator LED bulb. All 4 indicators are on as in the video.
Should i purchase relay, will it solve the problem?
Thax sir this problem is face me
Bro show the bulb where to connect..
Bhai seat ke niche bulb joda hai uska plz connection batao na....
Dono Bulb ki positive do indicator ki line me, or negative ground
@@EzMeck thx brother....
Thanks bhai
Super
Bhai love u thnq
thanks bhai...
welcome
Thanku
Welcome
I faced these type of problem after purchased led indicator my honda navi.Then i install each side 10 watt bulb then solved problem. 😊😊
Thanks bro 👍👍👍
Bhai koi problem nahi hoga na wiring me...... Meri xpulse 200 T vehicle hai usme led indicator install kiya lekin wo kaam nahi kar rahe aur isme flasher bhi nahi hai direct wiring hai.... show room wale bol rahe hai meter board me flasher hai bolre lekin nikal nahi sakte usko..... ....
Agar wiring thik se kare to problem nehi hoga.
@@EzMeck aapke idea se led kaam kar rahe hai thank you.....😊
Thanks bro
Welcome 😊
Pehle to flash kar raha tha mere bike me lekin baad me mhi
Bro can you please explain in English? Please
Led indicators can not create enough load so that the flasher relay could work, hence we need to connect one bulb on each side of the indicator to create load,( the resistance inside the halogen bulbs will create a voltage drop hence create a load).
Thanks u sir
Most welcome
Thx bro..
Welcome