Apple iPhone 14 & 14 Plus Back Glass Replacement: Step-by-Step Guide & Difficulty Level Explained!

Welcome to comprehensive tutorial on replacing the back glass cover of the Apple iPhone 14 and iPhone 14 Plus! We must mention that this is a highly difficult repair, so proceed with caution. In this video, we'll walk you through the entire process step-by-step, highlighting the tools and techniques needed to get the job done right. To make things easier, we recommend choosing a back glass cover with a pre-installed metal frame, magnet, and camera lenses. In this video you will see difficulty level of this repair in detail, so you know what to expect before diving in. Whether you're a seasoned technician or a brave DIY enthusiast, this guide has you covered! Save money on expensive repairs and learn a valuable skill with our iPhone 14 & 14 Plus back glass replacement video. Don't forget to like, comment, and subscribe for more repair tutorials! 🔧📱💪

[@tyrexuk]

Hi what is the grinder tool you used for the camera lens do you have a link please :)
also great work!

[@mobizonaLT]

Hello, thank you for your kind words! Unfortunately, the grinder tool I used in the video is an older model and is no longer available for sale. However, you can find many alternatives by searching for "mini grinding machine". I hope this helps and you continue enjoying the content!

[@Faaveisapedo]

Where can i get the part

[@ridu9976]

Did you use heat on the plate to separate the glass ?

[@mobizonaLT]

Of coursem it was shown on the video.

[@ThankGod4Ant]

hi how did you take off wireless charger metal plate did u use metal wire or fishing line or can I use razor? also can I just use a glass punch tool instead of drill or is it requried.

[@mobizonaLT]

We do not recommend to use razor blade, because it can damage the wireless coil, better use separation wire.

[@ThankGod4Ant]

@@mobizonaLTok i bought same tools what do you cut with the saw just the glass or where you removing pieces

[@mobizonaLT]

@@ThankGod4Ant Hi!
Cutter Tool: mobizona.lt/en/cutter-and-oca-glue-remover-tool-relife-rl-056b-2in1

[@aaditychunara7948]

Please reply me iPhone ka back glass kholne se whoter proof nahi ho payega kya or usme koi problem nahi ayega please reply me

[@mobizonaLT]

@aaditychunara7948 the water-resistance of the device depends on how the back glass is replaced. If only the back glass is replaced without the full set, the water-resistance may be affected. However, if the back glass is replaced with the full kit as described on our website here: mobizona.lt/en/apple-iphone-14-plus-back-housing and you choose the Premium quality with Frame + Camera Glass + Magnet, and it's sealed with hermetic adhesives, then the waterproof level should remain unchanged.

[@Iam_bradg]

What is the name for the glue

[@mobizonaLT]

Best way to use Cold Glue: mobizona.lt/en/multipurpose-cold-glue-30ml but for this kind of glue need a Gun Glue Dispenser: mobizona.lt/en/glue-gun-dispenser-30cc-30ml-uv-loca-cold-glue-pm230-50
If you looking for easier solution to glue you can use T7000 glue for dark black glass (because glue color black): mobizona.lt/en/multipurpose-glue-zhanlida-t7000 or B7000 for light color back glass housing (because glue color is clear): mobizona.lt/en/multipurpose-glue-zhanlida-b7000

[@raiyanhashmi]

Hi
My flash light is not working after the changing the glass in my local market.
What to do for my flash light
Please reply asap.

[@mobizonaLT]

We apologize, but we cannot provide real assistance as it is impossible to do so remotely. However, please check if you might have accidentally damaged the Flex, the connector where the flash light attaches, or perhaps it just wasn't connected properly?

[@raiyanhashmi]

@@mobizonaLT I see that my flex is damaged then,
What to do after
Please reply 🙏

[@mobizonaLT]

In this situation, @raiyanhashmi, you essentially have two options:
1) The fastest but not the most cost-effective approach is to locate the specific part and replace it.
2) Alternatively, you could attempt micro soldering on the part. Afterward, use UV Curing Solder Mask Ink to isolate the contacts. However, this method requires a microscope and a considerable amount of experience.

[@raiyanhashmi]

@@mobizonaLT thanku so much for this information ❣️.

[@ArturArtkom]

Нихао братишка

[@nick______5853]

Ffs