FREE! tamiya tt-01 / tt-02 friction shock damping, completely reversible mod!

this is a simple and in many cases for people a free mod to provide damping to the tamiya friction shocks that come standard on tt-01 and tt-02 base kits. one of the first upgrades done to these kits are replacing the "terrible" frictions shocks to CVA or other oil damping shocks. in this mod im actually creating friction in the shock to provide damping using nitro fuel tubing and rod plastic rods cut from the tamiya parts tree the various parts come from. this mod requires no modification to any parts and is 100% reversible

[@clicko1231]

Fantastic idea! I just cut some power cables to the size and it did a similar job.

[@_.b.rc.g._]

This is actually awesome!!!

[@abdulhaniff4860]

Tq sir for showing this Idea... most upgrade on youtube is to change metal shock but in my place there is competion that need to use this stock shock for race... its call TTo2 GT stock race...

[@gino27224]

Sir, you are a genius. Thanks a lot.

[@o46b83]

Thanks for sharing. Really great!

[@jinggarcia]

nice DIY mod. makes the stock shocks usable again.

[@SuperBoulett]

Thanks you !!! It's Amazing.
J'ai essayé cela est c'est une super astuce ! Merci beaucoup, thanks you !!!

[@darrensontos1012]

This is a really clever idea. Unfortunately, it didn't work for me. The shocks had nice damping in the hand or when bounce testing on the bench. However, when I took it out to the asphalt it bounced and slid all over the place like it didn't have any suspension at all. I think it was binding for small bumps and only compressing for big bumps. I'd recommend either leaving the shocks alone or getting some $20 oil filled ones.

[@dwarfyh32]

Nice mod 👌

[@Aggrozwerg]

Danke für das Video

[@andersonsirolli616]

Good idea! Should be the factory way!

[@megatesla]

13:20 Awesome idea! Take note you have to rotate the stock TT02 damper the right way to lock them. If you hold them like that the top of your right hand should twist toward you, not away.

[@cndhobbies5220]

The shocks can only twist one way, there is a built in stop that prevents turning one direction or the other

[@megatesla]

@@cndhobbies5220 Yes, so if you need pliers to twist them you are turning the wrong direction.

[@cndhobbies5220]

@@megatesla I need the piers to twist them on cause its more difficult to put together when the insert and tubing inside the shock

[@megatesla]

@@cndhobbies5220 Okay that makes sense. But like I said previously, you are twisting them in the opposite direction to what they should be twisted to lock them. Unless yours and mine and the manual is different.

[@k1e1v1i1n]

maybe try this without the plastic incert. you made it too stiff.

[@jaja5870]

Great idea but guessing that the doesn't bounce so much with the battery and electronics installed.

[@cndhobbies5220]

It dampens quite well when the weight of the electronics are in. Cheap/free option for the kit

[@ricekreme1515]

This is amazing, it won't break anything at all?

[@cndhobbies5220]

Nothing is broken from doing this, works amazing on a black crc carpet track

[@kelvintaylor7077]

Why does something so simple, need to take up 17 minutes of my valuable time.

[@G3516dude]

Would this mod be permitted in Euro Truck racing?

[@cndhobbies5220]

That would be in your classes discretion at your track. But if its to be box stock where only things in the box can be used, if you take the rubber tubing that comes on the end of the motor, and cut them down to 4 equal lengths and used in the upper end of the shock insert, then it "should" be allowed as it all came in the box :)

[@G3516dude]

@@cndhobbies5220 thanks for the feedback. That’s a good idea about motor tube, cheers.

[@phuhque6724]

Interesting. Might just shove a hot glue stick in it to see how thst works 🤷‍♂️

[@cndhobbies5220]

It's a thought! Shouldn't hurt anything to test

[@gamercat7004]

I wonder what kind of glue sticks will be needed.