Nissan Versa Diagnosing and Replacing Bad Rear Wheel Bearings Full Video Guide Step By Step

SYMPTOMS OF A BAD WHEEL BEARING - How to Replace Rear Wheel Bearing 07-13 Nissan In this video, you will learn about 4 bad wheel bearing symptoms. Watching this video will help you diagnose to see if it is time to replace your wheel bearing. You will also learn how the wheel bearing works. This video also teaches you where the wheel bearing is located. The symptoms of a bad wheel bearing that you may experience are hearing a humming, growling, rumbling sounds, loose steering wheel, vibrations in the steering wheel, and an ABS light. if a wheel bearing on a Nissan Versa needs to be replaced, it will typically require the services of a professional mechanic, as the process can be complex and requires specialized tools.
Thank you for watching!
Tools & Parts :
1. Rear Driver and Passenger Side Wheel Hub Bearing Assembly Compatible with 2012-2019 Nissan Versa, 2014-2019 Nissan Versa: amzn.to/3ZHaAin
2. Snap Ring Pliers Set, 11-Piece - .038in - .09in (1-2.3mm) Straight & Bent Retaining Ring Pliers w/Hook & Pick : amzn.to/3CPkQey
3. 19pcs Universal Front Wheel Drive Bearing Puller | Front Wheel Hub Removal Car Kit Set : amzn.to/3QIPEU1
4.12-Point Axle Nut Socket Set (8 Piece) : amzn.to/3w75Ncu
General overview of the steps involved:
1. Raise the vehicle and support it securely on jack stands.
2. Remove the wheel and tire assembly.
3. Remove the Axle Nut and Brake Drums.
4. Remove the Drum assembly by releasing the axle nut and pulling it out of the Drum Brakes.
5. Press out the old wheel bearing using a press or a bearing puller.
Clean and inspect the Brake Drum, making sure it is free of damage or wear.
6. Press the new wheel bearing into the Brake Drums.
7. Reinstall the Drum assembly, rotor and tire and wheel assembly.
8. Lower the vehicle and test drive the vehicle to make sure the installation was done correctly and that the wheel bearing is working properly.
It is very important to use the proper tools and procedures to avoid damaging the new bearing or the hub. It's also important to make sure that the new bearing is the correct one for your specific make and model.
This / @vehicles-tips Channel contains affiliate links, which means that if you click on one of the product links and make a purchase, I may receive a small commission with no additional cost to you.
Visit our official website!
vehiclestips.com/
Connect with us on our Social pages:
/ vehiclestips
#wheelbearing #nissanversa #howto

[@Vehicles-Tips]

Tools & Parts :
1. Rear Driver and Passenger Side Wheel Hub Bearing Assembly Compatible with 2012-2019 Nissan Versa, 2014-2019 Nissan Versa: amzn.to/3ZHaAin
2. Snap Ring Pliers Set, 11-Piece - .038in - .09in (1-2.3mm) Straight & Bent Retaining Ring Pliers w/Hook & Pick : amzn.to/3CPkQey
3. 19pcs Universal Front Wheel Drive Bearing Puller | Front Wheel Hub Removal Car Kit Set : amzn.to/3QIPEU1
4.12-Point Axle Nut Socket Set (8 Piece) : amzn.to/3w75Ncu

[@bobfdowd]

Would it sound loud from the back? Like a dry rotted, bad tire(s)?

[@Vehicles-Tips]

Just depend ..if the wheel bearing is shot completely .. like grinding pretty bad you will hear it by free spinning the wheel.. or you can drive it down the road it will sound like worn out tire like cupping wear noise .. 🤙

[@user-lx8db1eq7h]

Is bad bearing will illuminate the ABS light? Versa 2020

[@Vehicles-Tips]

Just depend … how bad is wheel bearing . Mostly if the bearing goes way bad the ball bearing missing or damage or maybe melted possible can damage wheel speed sensor .. ..

[@killerelite4209]

You have to move the steering to probably hear the noise cause when its straight its in neutral nothing will be heard

[@Vehicles-Tips]

Yes.. Sir.. Thank so you much for sharing some positive advice and tips , tricks. Your Comment mean a lot for this channel and also it will help other viewer.. who watch this video.. might have same vehicles problem.. just wanted say happy TH-cam 2024 Stay Bless..

[@kikerules]

did you remove 2 snap rings from the same side ?

[@Vehicles-Tips]

Hi there ..only one clip per side .. but I did replace both side … if you need more help I’m more happy to help 😁