Please note for none mechanics watching this video...there are a ton of things not shown, like piston ring/bearing measurement's, torque specs, bolt tightening sequences, valve shim spec check, replacement of "one use" bolts etc, etc. Not saying a none mechanic can't dive in a do this, but please know that there is a lot more involved then what is shown in this good video.
Never use a torque wrench to loosen screws as this will damage the internal mechanism and the wrench will not tighten the screws to the correct torque.
hello, I have a question for you, my lower engine block is leaking without removing the engine head, I can put it on my own with sealant, and at the same time I will only disassemble the bottom of the Yamaha R1 09-14 block and how many more notons to tighten it😊😊
Buenas amigo le escribo desde Argentina una consulta tengo la misma moto y me parpadea luz de aceite pasando los 220 y con un 8 minutos de permanecía en velocidad si continuo se queda prendido y si bajo la aceleración a 160 se apaga la luz que podría ser el problema para sustituir lo que corresponda y no falle así muchas gracias
hola, este video no es de ellos, es de IM MOTORCYCLE que son de japon. Fijate que tenga la viscosidad correcta el aceite, la luz te queda prendida cuando tiene mucha presion generalmente
Please note for none mechanics watching this video...there are a ton of things not shown, like piston ring/bearing measurement's, torque specs, bolt tightening sequences, valve shim spec check, replacement of "one use" bolts etc, etc. Not saying a none mechanic can't dive in a do this, but please know that there is a lot more involved then what is shown in this good video.
Thanks for saving that motorcycle, there are less nowadays
Was it safe to rev the engine that much from a freshly rebuild
No. Idk why did they rev it to 12k - 13k but its not safe at all.
Good job, but it looks pretty easy on video
Never use a torque wrench to loosen screws as this will damage the internal mechanism and the wrench will not tighten the screws to the correct torque.
what's the estimate on the job like that ??
hello, I have a question for you, my lower engine block is leaking without removing the engine head, I can put it on my own with sealant, and at the same time I will only disassemble the bottom of the Yamaha R1 09-14 block and how many more notons to tighten it😊😊
boss level mechanics
Such an excellent video. Thank you
out of curiosity, what would a project like this cost to have done to a bike?
leme know if you found out
Cost to do all that?
Gros boulot, de mécano quoi, bravo pour le résultat . Pistons juste re surfacés ou changés ?
I need ask you
What is this weter
Where are you located?
Buenas amigo le escribo desde Argentina una consulta tengo la misma moto y me parpadea luz de aceite pasando los 220 y con un 8 minutos de permanecía en velocidad si continuo se queda prendido y si bajo la aceleración a 160 se apaga la luz que podría ser el problema para sustituir lo que corresponda y no falle así muchas gracias
hola, este video no es de ellos, es de IM MOTORCYCLE que son de japon.
Fijate que tenga la viscosidad correcta el aceite, la luz te queda prendida cuando tiene mucha presion generalmente
Add some extra 200-300ml engine oil into your bike.
R1 usually have that meaning you did not have enough engine oil for high rev or speed.
Mucha espuma el aceite ponele de más aunque sea 100 cc
hi i’m from iraq i have a r1 2103 engine plowed i love if you can fix it for me but idont know ho
hi i have a 2014 engine i want to fix it how can i send it to you i’m from iraq
recovering crankshaft from r1
Hi how are you
Fair play 👌🏾
to much noise with music