Morning from the uk👍 Just fitted same to my Rs. You can also, not use the tops and use the original clamp. That's the way I went and personally think, that looks better. After a couple of rides, definitely a comfortable improvement. Safe rides mate 🏍🍻🤙
Hi from the UK. i fitted these voigt riser to my 900rs, excellent quality and i thought they did the job of moving the bars back and up very well, and no problems as you said with the cables etc just made sure i had a bit of slack pulled through. they do give a decent seating position for sure. since then i have tried another combination. i took the risers of and then turned the original bar post 180 degrees as you said and then fitted a set of 20mm voigt straight risers, up to now I'm happy with that combination so have left it at that. but I'm keeping the offset voigt risers also just in case i want to put them back on, for sure both sets work well and take the strain of the wrist. as for the seat i have both kawasaki seats but prefer the low seat but it is a little firm so i had one of my mates who is a upholsterer and biker cut out a section of the seat and replaced it with some softer foam, feels much better now. the next thing i have just fitted is a samurider chic road commet bikini type fairing, excellent quality and looks nice, i haven't had chance to ride it yet as the weather has been bad here in UK lately, but I'm told from other guys that have fitted it that it does deflect a bit of the wind away from the chest. there is a 6 month wait for this type of fairing if you want it colour coded. ok thanks for posting some good how to vids, my next job is ECU flash lol.
@@jdh4041 It was a typo. The service was bad I was going to ask you a question. I got the answer from the channel owner . I wanted to know what is the size of the bar riser you got. Thank you for all the information you provided. Very useful and insightful.
Hi Dave, thanks for this video. Was good to hear that you didn’t have any problem with cable / wiring length with these risers (ie up AND back). Have you had a chance to go for a decent ride to see what you think of the new handle bar position (it’d be good to hear what you think)? Cheers Mike
@@michaelbopf8013 G’day Mike, unfortunately not, I have been flat out working or the weather has been terrible. I will post a short video when I get the chance though.
I bought those same exact risers, however... I bought them for the RS CAFE. The Cafe bars are different than the standard ones, they're more flat across. I just felt like I was hunched over just a tiny bit much.. Crazy thing is, I love your seat !!! Where did you get it ?! I live in the US but, maybe I can hunt it down.. Nice bike man !
Thanks, I bought the seat from Core Motorcycle Seats in the UK. It was expensive, especially when factoring in postage to Australia, but it's a great seat.
Hi Dave, great post, I just installed them on my SE. The cables are really streched to their limit though, Did you reroute your’s? Cheers, Peder Sweden
![เปิดใจ “ต้นหอม ศกุนตลา” หลังโดนพาดพิงธุรกิจที่เคยทำ และผลกระทบทำถูกปลดฟ้าผ่า! | แฉ 24 ต.ค.67 [2/3]](http://i.ytimg.com/vi/vCi5OIqlxaE/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 84 วันนี้!! คู่เอก "ก้องศึก vs เมืองไทย"](http://i.ytimg.com/vi/3kuzsAIDf1c/mqdefault.jpg)
Morning from the uk👍
Just fitted same to my Rs.
You can also, not use the tops and use the original clamp.
That's the way I went and personally think, that looks better.
After a couple of rides, definitely a comfortable improvement.
Safe rides mate 🏍🍻🤙
@@Flyingscotsman3 G’day, thanks, I was toying with the idea keeping the standard clamp but thought I would change it up a bit, I’ll see how it goes.
Hi from the UK. i fitted these voigt riser to my 900rs, excellent quality and i thought they did the job of moving the bars back and up very well, and no problems as you said with the cables etc just made sure i had a bit of slack pulled through. they do give a decent seating position for sure. since then i have tried another combination. i took the risers of and then turned the original bar post 180 degrees as you said and then fitted a set of 20mm voigt straight risers, up to now I'm happy with that combination so have left it at that. but I'm keeping the offset voigt risers also just in case i want to put them back on, for sure both sets work well and take the strain of the wrist. as for the seat i have both kawasaki seats but prefer the low seat but it is a little firm so i had one of my mates who is a upholsterer and biker cut out a section of the seat and replaced it with some softer foam, feels much better now. the next thing i have just fitted is a samurider chic road commet bikini type fairing, excellent quality and looks nice, i haven't had chance to ride it yet as the weather has been bad here in UK lately, but I'm told from other guys that have fitted it that it does deflect a bit of the wind away from the chest. there is a 6 month wait for this type of fairing if you want it colour coded. ok thanks for posting some good how to vids, my next job is ECU flash lol.
@@goldfish8196 ??
@@jdh4041 It was a typo. The service was bad I was going to ask you a question. I got the answer from the channel owner . I wanted to know what is the size of the bar riser you got. Thank you for all the information you provided. Very useful and insightful.
@@jdh4041 typo
Hi Dave, thanks for this video. Was good to hear that you didn’t have any problem with cable / wiring length with these risers (ie up AND back).
Have you had a chance to go for a decent ride to see what you think of the new handle bar position (it’d be good to hear what you think)?
Cheers Mike
@@michaelbopf8013 G’day Mike, unfortunately not, I have been flat out working or the weather has been terrible. I will post a short video when I get the chance though.
I bought those same exact risers, however... I bought them for the RS CAFE. The Cafe bars are different than the standard ones, they're more flat across. I just felt like I was hunched over just a tiny bit much.. Crazy thing is, I love your seat !!! Where did you get it ?! I live in the US but, maybe I can hunt it down.. Nice bike man !
Thanks, I bought the seat from Core Motorcycle Seats in the UK. It was expensive, especially when factoring in postage to Australia, but it's a great seat.
Hi Dave, great post, I just installed them on my SE. The cables are really streched to their limit though, Did you reroute your’s?
Cheers,
Peder
Sweden
@@pederhyllengren Hi Peder, no I didn’t need to reroute my cables, everything just seemed to fit
How many mm is your bar riser? sorry if I missed from the video
@@goldfish8196 30mm with 21mm offset
@@davesbikes Thank you 🙏