A wooden vice like this is a wonderful thing. I particularly like this version because of its versatility. An idea: If you insert 2 drive-in nuts (correctly aligned depending on the thread pitch and wood thickness) into a block of wood from both sides, the thread would be resilient in both directions.
Это называется "Параллельные тиски", в просторечии "Станочные". Созданы в начале технического развития человечества, металлическую версию этих тисков можно найти в продаже. Делать такие вещи из деревяшки вряд ли имеет смысл, лёгкие, неточные, неустойчивые, непрочные, а мороки на изготовление много. Инопланетяне не поставили ещё, хотя бы одну, стальную направляющую чуть ниже затяжного винта, как это делается на обычных тисках, болтанки было бы меньше.
Excellent device & well-recorded. And thank you SO MUCH for not contaminating your video with a distracting, irritating & totally unnecessary music bed!
Excellent idea. Also, this video is a great tutorial for others wishing to make how-to videos with no narration. I find that most do not take the patience and care to make them engaging and instructive. Very well done.
I just came upon your channel. I could watch your videos for hours! I probably have. 🤣 AMAZING job!!! I will certainly be building a lot, if not all, of these for my shop. Great job!
Great job!. Finally somebody out there doing something new and interesting don't understand New keyboard lnxstructlions though totally different? What's up with that?
Very well done video; thank you for proving that most background music is detrimental to the quality of the video. I get so tired of watching videos with background music that nobody did any sound check on and of course it sounds like poop. People need to learn that the background music can either make or break their video and they need to do some careful checking to see if the video wouldn't be much better without background music. I'm going to make one of these.
При нынешних космических ценах на все, такие приспособления из доступных материалов очень полезны, спасибо за примеры, ещё бы чертежи с размерами! Журнал Моделист- конструктор не купить!
Тиски хороши, слов нет. Но выгибает из не слабо. Думаю будет лучше из бакелитовой фанеры, ну и основание усилить, например две узкие полоски по которым скользит губка, сделать шире.
Нельзя делать выпирающий железный винт (выступающий за габариты тисков) на деревяных тисках . Идея очень хорошая , но фиксирующий винт должен быть вне рабочей зоны .
Just so confusing I know different language but usually I can just push the button to say put into English but the whole bunch of crap comes in the way. What's up with that.?
bonjour, travaux intéressant pouvez vous m'envoyer les dimensions ou Plan S'il vous plaît je désirerais en fabriquer un modèle pour ma personne merci d'avance après réception de vôtre réponse je vous enverrais mon adresse Mail s'il faut amicalement Alain
Ты гений, брат! Реально вдохеовляешь!
Я обязательно сделаю такие тиски.
Спасибо Тебе.
A wooden vice like this is a wonderful thing.
I particularly like this version because of its versatility.
An idea:
If you insert 2 drive-in nuts (correctly aligned depending on the thread pitch and wood thickness) into a block of wood from both sides, the thread would be resilient in both directions.
Thank you for your good comments.
I will pay more attention.👌😌
@@JigShop I have to thank.
Это называется "Параллельные тиски", в просторечии "Станочные". Созданы в начале технического развития человечества, металлическую версию этих тисков можно найти в продаже. Делать такие вещи из деревяшки вряд ли имеет смысл, лёгкие, неточные, неустойчивые, непрочные, а мороки на изготовление много.
Инопланетяне не поставили ещё, хотя бы одну, стальную направляющую чуть ниже затяжного винта, как это делается на обычных тисках, болтанки было бы меньше.
This is new and great, but because berk plywood is hard to find and expensive, I will make one from solid wood thanks for sharing from Mexico.
👍👍😉
😊 5+!
Очень полезный и универсальный инструмент. Благодарю за видео.
Спасибо. Хорошего дня.
Excellent device & well-recorded. And thank you SO MUCH for not contaminating your video with a distracting, irritating & totally unnecessary music bed!
Leave the locking bolt out, and you can grip tapered or non-parallel items, too!
Que maravilla de idea
Gracias por su video
Brilliant design and a great video.
Brilliant design and a great video.
Идея хорошая, но, по моему, одного болта для фиксации маловато.
Мастер ! Молодец ! И я такие себе сделаю . Но немного внесу свои изменения . Удачи .
Describing this masterpiece tool as perfect innovative is an understatement.
On the flat side you could use the router bit to punch cone shaped holes of different sizes, making it possible to hold spherical objects as well.
Sehr gut gefilmt.
Guter Aufbau.
Zuerst die Funktion, dann die Herstellung.
Selbstverliebte Geldgrapscher machen es immer anders herum.
Верно. Это редко встретишь в наше время.
Anyway keep up the good work I will look at your other videos and just watched and not comment
Супер тиски! Побежал себе такие делать!
Brilliant-I need to make one of these for my own shop.
Pulito,ordinato, efficace....bravo!!!
WOW! Simple Yet Amazing! 👍😎
Very nice idea. I think if you use 2 pins, you dont need to look for your allen key. Just insert the 2 pins to lock the square
👍😉Thank you for your good comments.
Or four...(was my first thought...)
Like the original idea and
Yours too👍
AB
Eccellente!!!
Thank you!
Excellent idea. Also, this video is a great tutorial for others wishing to make how-to videos with no narration. I find that most do not take the patience and care to make them engaging and instructive. Very well done.
I just came upon your channel. I could watch your videos for hours! I probably have. 🤣 AMAZING job!!! I will certainly be building a lot, if not all, of these for my shop. Great job!
Красота! Спасибо!
Simple y llanamente FAN -´TÁS - TI - CO !!!
This is very cool! Do you have any detailed plans?
You are a absolute genius my friend
Great design!
Muy buena idea
FABULOUS!!!
Thanks a lot!
✅✅✅✅✅✅✅✅✅☑
Fantastic...
Jazak-Allah
супер, я себе такие же напилю. спасибо.
Great job!. Finally somebody out there doing something new and interesting don't understand New keyboard lnxstructlions though totally different? What's up with that?
Excelente muy bueno pero carece de lo más importante las medidas, muchísimas gracias
Thank you for your good comments.
I will pay more attention.👌😌
Very nice!
Спасибо за отличное видео,очень всё понятно и детально показано!!! Скоро тоже себе буду делать, такое же,замечательное,функциональное устройство !👍👍👍
Impresionante
Точно так!Это высокие лучшие технологии инопланетян ! 😄😄😄😄😄😆😆😆😆😆😅😅😅😅😅
muito bom gostei
woooo thank you so much, great idea
thank for share
Thank you for watching.
That is a very interesting vice
Супер
Металлические тиски с механизмом быстрой фиксации поворотной губки очень бы пригодились😊
It's like a Kurt vise that's used for metal working.
I will copy your idea, and some of your others, very good video's... Thanks
Any ideas? Please let me know too.
Very well done video; thank you for proving that most background music is detrimental to the quality of the video. I get so tired of watching videos with background music that nobody did any sound check on and of course it sounds like poop. People need to learn that the background music can either make or break their video and they need to do some careful checking to see if the video wouldn't be much better without background music. I'm going to make one of these.
Another wonder idea & Video
👍😉
Einfach Genial👍👍
😉👍
A vise without vice.
Muito prático.
Thank you. Have a good day
Классно, продумано.
5+++.
Do you have plans available for purchase?
Nos puedes facilitar las medidas por favor
Very nice, but in my shop in the summer it would bind up solid and be unusable from the humidity.
При нынешних космических ценах на все, такие приспособления из доступных материалов очень полезны, спасибо за примеры, ещё бы чертежи с размерами! Журнал Моделист- конструктор не купить!
Так под себя делай
👍
Keren masse,,kreatif
А что не из пластилина ?
Esse tipo de morça é que estava pensando Adélio do Brasil
Толково...!
Wie heisst der Außerirdische?
Enable playback on external websites please. We'd like to share this video.
Тиски хороши, слов нет. Но выгибает из не слабо. Думаю будет лучше из бакелитовой фанеры, ну и основание усилить, например две узкие полоски по которым скользит губка, сделать шире.
👍👍🤘
Нельзя делать выпирающий железный винт (выступающий за габариты тисков) на деревяных тисках .
Идея очень хорошая , но фиксирующий винт должен быть вне рабочей зоны .
!!!
🙏👏👍💪
Это у инопланетян в д. саду преподают🤣
押さえる側も溝を切った方がいいよね。だから出来としては90点。
Just so confusing I know different language but usually I can just push the button to say put into English but the whole bunch of crap comes in the way. What's up with that.?
😮👍🏻👏🏻🇪🇨🍻
😂
Доктора , доктора скорее.
I see that the aliens have not discovered the fractal vice yet.
万力は固定しないと意味ないぞ
[jhjifz gjltkrf
Complimenti bel prefetto bravo 👁👍👁
Genial amigo colega
Мне понравилось
bonjour, travaux intéressant pouvez vous m'envoyer les dimensions ou Plan S'il vous plaît je désirerais en fabriquer un modèle pour ma personne merci d'avance après réception de vôtre réponse je vous enverrais mon adresse Mail s'il faut amicalement Alain
они-же мягкие как тёплое гавно, там люфты ппц!
сам щось можиш робити окрім теплого гімна
А тебе что на них сотки ловит))))))))))))))