Really inspiring. Underbody work with the rotator makes it look so easy. Only lying under and worked most on ground with my cars. Keep up the progress will follow the whole process. Best reg from Norway
Very impressive project, thanks for sharing your knowledge and even providing commentary in English ✌ I have a 1.8t converted b4 Cabrio, but the 5 door 80 quattro is just dreamy
Impressive how it fits together so neatly with just the Adition of Diff bracket you welded onto shell great work 👍 look forward to seeing the finished car
I'm a mechanic, I've restored a few cars and repaired too many over the last 35 years, great video I appreciate the work that you did, out of interest how long altogether from stripping the car to when it was finished did it take, I'd say 2 to 3 weeks going well at it..
Good afternoon friend, ask me a question: To use 4 x 4, does the rear differential need to have exactly the same ratio as the front differential? parabens e Sucesso Sempre!!!
I was told that the conversion is possible only in the avant body type. Glad to see it perfectly fits in the sedan. Nice job. I have my "95 avant and all the spare parts for quattro conversion. But your comments about "93 July mark makes me a little bit worried 🤔
I dont want to scare you, but my friend has also 95 avant and he dont have threads and strengthening plates in subframes. He had only empty holes. He did open subframe from interior side and welds thease plates in the subframe. A lit work :(
you had thread in the body? i just had a hole udnder the protection and too i dont hawe mounting for quattro exhaust and i think 2 holders for fuel tank
Thanks! Its easy, i have all diff lock wiring, button. Only need to connect. ;) But im not sure that i use this diff with lock. This car dont drive in winter so its nat useful.
Very informative video so I have a B2 1986 Audi Coupe GT Commemorative Edition that I plan on converting it to the Urquattro meanwhile I plan to convert my B4 1996 Audi Cabriolet 2.8 V6 to an S2. I have a few more other cars like a UrS4, and three B3 90 Coupe Quattros with the 20v turbo. Eager to see your results & learn from you! Keep up thr good work!
In coupe its not possible like that. You need to change all trunk metal parts and then you can install quattro axles. In coupe you have b3 quattro rear axle system. Its different.
Hi! They were for sale in Audi tradition. But after this video release they are out of stock right now. Side plates are for sale but middle one out of stock. A lit started to building quattros i think 😃
After i saw this vid I was a bit worried because my b4 is from 95 so, according to what you said, the threads for the rear axle might not be there. Today i finished stripping down the body and i could take a look where the rear axle should fit. I found the protective tape and under it it’s just a hole :( . So i want to ask you, in your opinion could i fabricate some 8mm thick flanges and weld a nut on it then place it inside the body frame?
Hi! You can write me on wolf garage facebook page. I can share contact with you who made something like you plan is. Can change toughts then with you. ;)
Hello great project. I myself was thinking about something like that. I have 80 b4 94. Everyone says it can't be done. tell me if in 94 fwd it looks like yours?
Schade, dass es nicht so leicht ist ein Cabriolet auf quattro umzubauen. Meine 280 PS sind mit Frontantrieb, im 1 und 2 Gang nicht mit Vollgas zu fahren,zu wenig Grip.
Turning FWD mush to AWD muscles, love it, great build
Really inspiring. Underbody work with the rotator makes it look so easy. Only lying under and worked most on ground with my cars. Keep up the progress will follow the whole process. Best reg from Norway
Thanks! :) I think this work is really painful to do on ground. 😃
Very impressive project, thanks for sharing your knowledge and even providing commentary in English ✌ I have a 1.8t converted b4 Cabrio, but the 5 door 80 quattro is just dreamy
Impressive how it fits together so neatly with just the Adition of Diff bracket you welded onto shell great work 👍 look forward to seeing the finished car
Thanks! :) It fits good indeed.
Cant wait to get this thing running.
Just lovely. Want to do same conversion for my old baby.
I'm a mechanic, I've restored a few cars and repaired too many over the last 35 years, great video I appreciate the work that you did, out of interest how long altogether from stripping the car to when it was finished did it take, I'd say 2 to 3 weeks going well at it..
Good afternoon friend, ask me a question:
To use 4 x 4, does the rear differential need to have exactly the same ratio as the front differential? parabens e Sucesso Sempre!!!
I'm not sure why this video got in my feed, but I'm pretty sure it would take me something like 15 months instead of 15 minutes.
Can you make a video about converting 100/A6 C4 body from FWD to Quattro? If its possible, what I need to do?
Nice video anyways :D
Well done Mate
Thanks! :)
So the 80 B4 is practically "ready to quattro" as I see, delicious car😋
Yes, if its made before june 93 🙂.
It is good car 😃
@@WolfGarage So the larger part of them since has been in production from late 91 to late 94👌
I have this late 91. I dont have even abs system what i like the most. It feels like real race car. 😃
How and where did you get the parts for it, just looking at how much it would cost to convert a B4 body to quattro.
I did have damaged quattro body. After my video realease all the body panels are sold out in audi traction page.
Where can you buy those new brackets?
shops.audi.com/en_GB/web/tradition
Somewhere under body panels section.
I was told that the conversion is possible only in the avant body type. Glad to see it perfectly fits in the sedan. Nice job.
I have my "95 avant and all the spare parts for quattro conversion. But your comments about "93 July mark makes me a little bit worried 🤔
I dont want to scare you, but my friend has also 95 avant and he dont have threads and strengthening plates in subframes. He had only empty holes.
He did open subframe from interior side and welds thease plates in the subframe. A lit work :(
@@WolfGarage thanks for the info. I hope so I will have enough strenght to do that..
Does the 80 b4 sedan before 93 July have mounting plates in subframe?
@@Poderis4 How is your build going ?
@@WolfGarageI wonder if you could thread the holes and reinforce the mounting points
you had thread in the body? i just had a hole udnder the protection and too i dont hawe mounting for quattro exhaust and i think 2 holders for fuel tank
Then your car is newer than june 1993?
@@WolfGarage i have one 1992 and second 1994
1992 one did not have threads?
I did have all threads from factory.
@@WolfGarage both dont have
Thats intresting. Bad to heard that.
A really nice video, do you perhaps know how to get the diff lock to work then? as the stock quattro has the button next to the handbrake
Thanks! Its easy, i have all diff lock wiring, button. Only need to connect. ;)
But im not sure that i use this diff with lock. This car dont drive in winter so its nat useful.
Hello. I saw your video on converting fwd to quattro. But how easy is it to convert quattro to fwd to improve economy. But mine is Audi 100 c4
Where did you get the differential front mount bracket?
From quattro body that had crashed. Also for sale in audi traction but they are out of stock i did look.
Very informative video so I have a B2 1986 Audi Coupe GT Commemorative Edition that I plan on converting it to the Urquattro meanwhile I plan to convert my B4 1996 Audi Cabriolet 2.8 V6 to an S2. I have a few more other cars like a UrS4, and three B3 90 Coupe Quattros with the 20v turbo. Eager to see your results & learn from you! Keep up thr good work!
Thanks! You have some really nice collection of cars. :)
I have a coupe b4 94 is the same on limo and coupe ? What you think its posible to be there that holes ?
In coupe its not possible like that.
You need to change all trunk metal parts and then you can install quattro axles.
In coupe you have b3 quattro rear axle system.
Its different.
Ive just bought a doner b5 quattro. All i need now is a pre 93 80 😂
Hello where can i buy this front diff mount bracket, i plan to swap on my audi as well. I can't find this mount anywhere. Thanks for your reply
Hi! They were for sale in Audi tradition. But after this video release they are out of stock right now. Side plates are for sale but middle one out of stock. A lit started to building quattros i think 😃
After i saw this vid I was a bit worried because my b4 is from 95 so, according to what you said, the threads for the rear axle might not be there. Today i finished stripping down the body and i could take a look where the rear axle should fit. I found the protective tape and under it it’s just a hole :( . So i want to ask you, in your opinion could i fabricate some 8mm thick flanges and weld a nut on it then place it inside the body frame?
Hi! You can write me on wolf garage facebook page. I can share contact with you who made something like you plan is. Can change toughts then with you. ;)
Hello great project. I myself was thinking about something like that. I have 80 b4 94. Everyone says it can't be done. tell me if in 94 fwd it looks like yours?
In 94 its possible but a lot more work and some custom brackets need to be done. :)
I am not afraid of hard work 🤪 I am looking for spare parts and I am preparing a place to work
hey i have a suggestion! get a small mic with a cord and clip it into your shirt so the audio stays consistant
Thanks! Need to take it to a plan yes.
Hi! I wonder if you have the part number on the Quattro fuel tank?
Sorry, dont have fuel tank part number.
Ok. Thanks.
Schade, dass es nicht so leicht ist ein Cabriolet auf quattro umzubauen.
Meine 280 PS sind mit Frontantrieb, im 1 und 2 Gang nicht mit Vollgas zu fahren,zu wenig Grip.
Hey mate, I got Audi 80 B3 year 1991 2.0 Sport Edition. Any thoughts is it possible to do AWD?
With b3 you need to change complete rear floor. I think its too much work there. Easyer to buy quattro when you have b3.
@@WolfGarage alright, than will search for B4 :) have a nice day
How can I Quattro convert my b3 sedan ?Is it possible and what will I need ?
Impazzito 😂😂😂❤👍💪
Hey do you have a pn# for the bracket and where to buy it from? From a dealer or Audi tradition?
💪💪
Hi! Part number i dont have anymore but they was for sale in Audi tradition yes.
Не подскажите а из седана 92года марта месяца можно такое же сделать?
Yo need to look uner the car, do you have threads under stone protection. If yes then its easy.
I have a 1991 Audi 80 b4. If I understood correctly the only thing I need to weld into the body is the rear diff mount right?
Yes, you need to weld rear diff front mount to your car.
And drive shaft bearing holder.
@@WolfGarage so basically The same stuff you did on your b3
Its B4 but same work yes.
@@WolfGarage okay, thank you
80s fwd and Quattro 80 has the same fueltank? or are the different? thanks!
quattro fuel tank is different than fwd fuel tank to allow room for rear subframe and differential etc
how much would that cost?
Whaaattt? What is the rear subframe and diff from, are they from a b5 quattro?
They are from b4 quattro, but b5 has same rear suspension. And will fit also. 🙂
which car did you bring this part
So the B4 Audi 80 is ready for quattro I see?
Yes, whats made before june 1993.
@@WolfGarage mine is a 1993 model.... But if ut was made before june ut should be fine? Thanks
You can check it out when you take car on lift and look do you have threads in holes where rear axle mounts.
@@WolfGarage cool thanks, ill check for that
Hello what fuel tank did u use? B5?
Its b4 quattro original fuel tank.
💣💣💣💣👍👍👍👍
I have a silly question, is it possible to convert the A4 B5 1.9tdi 65kw sedan this way or is it only for an 80? Thanks in advance
Only b4 sadly