Peace Sport Motorsports is the best Chinese Motor Bike Company available to this day. I've had several of their 150cc to 250cc mopeds, I had one of their 400cc quads and one of their 125 2 stroke dirt bikes and never had any issues out of any of them. Do your regular maintenance check your brakes tires fluids and they work as good or better than anything you can buy made in America or Japan.
I just picked up a 2022 raven this season, and love it. I gotta say though, im a little jealous 🤣 been doing a few upgrades and she gets up to 70mph with 17/42 sprocket. I wanna put some street tires on her next, but due to cost restrictions imma be using the larger diameter stock rims instead of going full supermoto with 17s. Hey, at least I won't need a new speedo and cluster with just doing tires 😅
I've heard several say that you not only want to check every bolt on a Chinese bike, you want to loctite every bolt. But it might not be as bad with this balance shaft bike. But anyway, nice looking bike. Look forward to its progression. Great videos!!
I went from a 17/46=2.9 final drive ratio to a 17/34=2.0, no extra mods nothing. Top end exceleration is excellent also. What changes is that the RPM are much lower and in 4th you can hit 100km/h with a top speed in 5th of about 138km/h.
My son's friend has the exact same kind. And he likes it and it drive's and handle's good. And they can go trail riding taking the bike since it's street legal. I have one like that but it's a Yamaha. And yes it's street Legal. I take it to work and on lunch break's i go check out the kid's when there riding at the trail's.
Loved the video I just bought a Chinese bike 250cc dirt bike Ktm clone your advice on the carburetor makes sense as they are jetted in China not U.S. mine came with 28mm carb in at around 10ft above sea level in Houston Texas what would you suggest on jetting? Also will look into adjusting valves I got about10hrs on motor already changed break-in oil and put 10/40 regular penzoil in it. Any advice greatly appreciated!
Mine is a old baby 1975 yamaha rs100 2 stroke still has working torque induction and shes only 100cc and she got some torque on her enough to push u back in ur seat a bit
Does the engine on the MotoMax 250 vibrate less than the engine on the Brozz 250? Are they mistaken to be the same engine on both bikes or are they the same engines? The spec sheets indicates they have different engines????? You said the MotoMax 250 has stiff suspension and setup for the road. Does that mean I would experience a smoother ride on the bumpy backroads riding a Brozz 250? I intend to buy one of the bikes, but not both unless I get a sweetheart deal, then I would make some videos about which one I like best. I wish the factory provided us with more specifications. suspension travel, curb weight, ground clearance with a 200 lb rider. In my opinion after the larger jets richens the AFR to 14:1 high octane gas is not needed. The MotoMax spec says the compression ratio is 8.7 :1 eighty seven octavin should do fine unless the combustion chamber temperature is excessive. I have an AFR gauge but likely I'm too lazy to install it on which ever bike I buy. When Red Beard talked about how smooth the MotoMax 250's engine was running then I realized... like I was shot... like I was shot with a diamond... a diamond bullet right through my forehead. And I thought, my God... the genius of that! I'll buy the MotoMax so that every time I ride it parts won't fall off like they do on the Hawk. th-cam.com/video/pEa7a4n3f88/w-d-xo.html&lc=UgyMsQIQWB92g826hc94AaABAg.9Ka3Y960lAP9KmlcjzI2MF My 750 Norton vibrated so bad that the two frame tubes holding the front of the engine to the bike and the front suspension/steering stuff on it cracked completely. I found myself doing 90 mph with only one tube under the fuel tank holding the front of the bike to the rest of it. That was the last time I rode that bike. I traded it for a 57 Chevy . It overheated and blew a head gasket. While I was away at school without telling me my grandfather sold it for $25 because he didn't want to mow around it (shi* happens). A few years later a 57 Chevy would selling for $25,000. A 57 in showroom condition would bring around $100,000 these days. My grandfather didn't know these cars would be so popular. In 1946 he could have bought zero time P51 Mustangs with the machine guns still on them for scrap metal prices. Today a Low time P51 would sell for at least $10M.
Hello Big Red! Wow sounds better already! Carbed engines are leaned out so much for emissions! But at $2,500 is a screaming deal! What’s a Gnome cost now?
Idle mixture screw, you went from 3 turns out to 2 turns out. Does this increase the idle fuel? decrease the AFR? Is this the same engine that is on the hawk?
Is this the push rod engine or the OHC? Can't find a lumpy cam for the OHV engine. Got a skyteam ace that needs moar power. :) (the balance shaft really makes a difference eh!)
Bike looks pretty good but I'm really looking forward to all the upgrades that you're going to do to that engine and see what you have to say after them okay hope you're having a great day looking forward to the videos to come
I'm by no means a mechanic by anyone's definition, but I was wondering if there are many bad side effects,if any when upshifting a bike w/o using the clutch? It seems to be almost as smooth as shifting a utility quad ,are you only using the clutch when downshifting and stopping the bike?
RB you should check out motocheez's channel as he done some serious reviews of these uber/$1200-$1500 cheap bikes. He has many tips on how to prep/tune them too.
Red beard if you put that see Arya 5450 motor on that Chinese frame more than likely you are going to have to stretch the frame to get it in there and make custom motor mounts
I have seen several Motomax 250 videos where the carbs had to be rejeted! Why doesn´t the factory put on decent jeted carbs or a FIS (fuel injection system)?
Am I watching a tv show on discovery channel? The production value on this is way up from the TH-cam norm. I kind like it but I know I like the old way just my two cents. 👍👍from this guy
When is someone going to put a "big bore" kit into one of these china bikes & you tube it? Some websites indicate they are available from the factory & cost seems to be under $250 US .
Sporty looking, mousey compared to Japan bikes, however China is relentless in pursuing happiness. We are buying these because replacement parts are cheap and also we laughed at YAMAHA when they made a motorcycle on any Sunday part 1 now look at them. God bless China! And you all too💖
I notice the enlarged sum an cooling fins that different to the original chinese 250, do they have a changeable oil filter added now? They really need one but gee the chinese farm bike I have has been flogged an still runs lol will need rings soon so I'd recommend better quality rings if your going to port an increase compression 😎
Someone could make a ton of money if they made a cheap big bore kit for these.....Not sure how much more HP you could get out of it with just a bigger piston & cyl.
Nice but I don't think I want to buy a motorcycle that has to be fixed before riding it. The Chinese need to take note and fix that issue before they send it.
I dig the variety of wheeled, engine powered machines you and your team build buy and modify !
Hell I'd ride that back and forth to work in the spring and summer! Loiks like fun!
Really looking forward to this build. Love all your content and can't wait for the next video.
That’s pretty cool. Glad to see a video like this! Can’t wait for more!
How has this bike been holding up? You were able to register it?
Peace Sport Motorsports is the best Chinese Motor Bike Company available to this day. I've had several of their 150cc to 250cc mopeds, I had one of their 400cc quads and one of their 125 2 stroke dirt bikes and never had any issues out of any of them. Do your regular maintenance check your brakes tires fluids and they work as good or better than anything you can buy made in America or Japan.
Great video. I've done the porting and decking the head and the pwk 30 carb really wakes these little engines up.
That bike looks nice for a Chinese bike love your videos man keep up the good work I'll keep watching them and continue to like
I just picked up a 2022 raven this season, and love it. I gotta say though, im a little jealous 🤣 been doing a few upgrades and she gets up to 70mph with 17/42 sprocket. I wanna put some street tires on her next, but due to cost restrictions imma be using the larger diameter stock rims instead of going full supermoto with 17s. Hey, at least I won't need a new speedo and cluster with just doing tires 😅
I have the Brozz 250 from peace sports and I love it! Jeff @ peace sports is as awesome as they get, I really appreciate all he does for us customers.
How has the bike been for you? Does it have enough power to be fun and reliable?
Ooh yes, super cool, back with a vengeance brother. It's "will call"
I dig that bike a lot I bet it will wheelie thanks for letting me be in a clip you rock redbeard
I've heard several say that you not only want to check every bolt on a Chinese bike, you want to loctite every bolt. But it might not be as bad with this balance shaft bike. But anyway, nice looking bike. Look forward to its progression. Great videos!!
I went from a 17/46=2.9 final drive ratio to a 17/34=2.0, no extra mods nothing. Top end exceleration is excellent also. What changes is that the RPM are much lower and in 4th you can hit 100km/h with a top speed in 5th of about 138km/h.
The first thing that sticks out on this motorcycle for me is the narrow double down tube frame. The frame does not look strong.
Who is Will ? His name is on left front Fairing.
Fang Of Truth I said the same thing 😆
“WILL” you motomax?
Tis the question
I'd pull those decals before I even gassed it up.
MOTO-VLOG! I'm lovein it 😁👍
These are perfect for a wrecked 450 swap
😆
Just say no to drugs...
SCORE, great deal & it will be a good learning tool for improvement and speed.
My son's friend has the exact same kind. And he likes it and it drive's and handle's good. And they can go trail riding taking the bike since it's street legal. I have one like that but it's a Yamaha. And yes it's street Legal. I take it to work and on lunch break's i go check out the kid's when there riding at the trail's.
Loved the video I just bought a Chinese bike 250cc dirt bike Ktm clone your advice on the carburetor makes sense as they are jetted in China not U.S. mine came with 28mm carb in at around 10ft above sea level in Houston Texas what would you suggest on jetting? Also will look into adjusting valves I got about10hrs on motor already changed break-in oil and put 10/40 regular penzoil in it. Any advice greatly appreciated!
Mine is a old baby 1975 yamaha rs100 2 stroke still has working torque induction and shes only 100cc and she got some torque on her enough to push u back in ur seat a bit
Can't wait for this build
Before you swap to the 450 engine, slap a turbo on it and see what happens. 8:1 compression could be interesting with some forced air
I was hoping that you guys would do something like this.....man that's a sweet ass affordable bike! I want one...
Ronald Shelton 15hp? 870
Does the engine on the MotoMax 250 vibrate less than the engine on the Brozz 250? Are they mistaken to be the same engine on both bikes or are they the same engines? The spec sheets indicates they have different engines?????
You said the MotoMax 250 has stiff suspension and setup for the road. Does that mean I would experience a smoother ride on the bumpy backroads riding a Brozz 250?
I intend to buy one of the bikes, but not both unless I get a sweetheart deal, then I would make some videos about which one I like best.
I wish the factory provided us with more specifications. suspension travel, curb weight, ground clearance with a 200 lb rider.
In my opinion after the larger jets richens the AFR to 14:1 high octane gas is not needed. The MotoMax spec says the compression ratio is 8.7 :1 eighty seven octavin should do fine unless the combustion chamber temperature is excessive. I have an AFR gauge but likely I'm too lazy to install it on which ever bike I buy.
When Red Beard talked about how smooth the MotoMax 250's engine was running then I realized... like I was shot... like I was shot with a diamond... a diamond bullet right through my forehead. And I thought, my God... the genius of that! I'll buy the MotoMax so that every time I ride it parts won't fall off like they do on the Hawk. th-cam.com/video/pEa7a4n3f88/w-d-xo.html&lc=UgyMsQIQWB92g826hc94AaABAg.9Ka3Y960lAP9KmlcjzI2MF
My 750 Norton vibrated so bad that the two frame tubes holding the front of the engine to the bike and the front suspension/steering stuff on it cracked completely. I found myself doing 90 mph with only one tube under the fuel tank holding the front of the bike to the rest of it. That was the last time I rode that bike. I traded it for a 57 Chevy . It overheated and blew a head gasket. While I was away at school without telling me my grandfather sold it for $25 because he didn't want to mow around it (shi* happens). A few years later a 57 Chevy would selling for $25,000. A 57 in showroom condition would bring around $100,000 these days. My grandfather didn't know these cars would be so popular.
In 1946 he could have bought zero time P51 Mustangs with the machine guns still on them for scrap metal prices. Today a Low time P51 would sell for at least $10M.
For a second there i thought the instructions said "optional instructions" i would love that! Those are the kind of instructions i want.
It looks like Christmas came early at Red beards garage.Nice bike.
Seems like a cool bike and cheap too cant wait to see what you do to the bike..
How often do the spokes need to be tightened if this bike isn't abused off-road.? Just bumpy backroads.
Thts a mean machine for the price man
That things sweet bud 🤘🏻🐿🤘🏻 love the video . I’d say let’s go for a ride if ya lived closer lol
Hello Big Red! Wow sounds better already! Carbed engines are leaned out so much for emissions! But at $2,500 is a screaming deal! What’s a Gnome cost now?
Seems like a smooth running bike and looks better in person camera does no justice
Idle mixture screw, you went from 3 turns out to 2 turns out. Does this increase the idle fuel? decrease the AFR?
Is this the same engine that is on the hawk?
As long as the Chinese engine is a Bashan, Lifan, Loncin or Skyteam, they're solid.
Is this the push rod engine or the OHC? Can't find a lumpy cam for the OHV engine. Got a skyteam ace that needs moar power. :) (the balance shaft really makes a difference eh!)
Hey, if you swap that engine, and want to sell the 250, that's exactly what I'm looking for for a kart project I've been working on... :o
Bike looks pretty good but I'm really looking forward to all the upgrades that you're going to do to that engine and see what you have to say after them okay hope you're having a great day looking forward to the videos to come
I'm by no means a mechanic by anyone's definition, but I was wondering if there are many bad side effects,if any when upshifting a bike w/o using the clutch? It seems to be almost as smooth as shifting a utility quad ,are you only using the clutch when downshifting and stopping the bike?
I've got the 2020 WR450F but one of those to do all the silly stuff on would be good love my main bike too much lol
I see the Supermoto version appears to come with the front wheel already mounted unloke the dual sport and pitbike versions of the "kit".
Very nice looking super moto.
I cant wait to see this thing come to life and you can hear those valves sing lol
I know it's an old video but man! I want one lol
what do u think of apollo 2019 db 36 daul o h c 250cc deluxe on and off road
It looks like a decent little bike.
RB you should check out motocheez's channel as he done some serious reviews of these uber/$1200-$1500 cheap bikes. He has many tips on how to prep/tune them too.
How close is this related to the bashan cr250?
Cool vid guys cheers.
Looks great 👍
Red beard if you put that see Arya 5450 motor on that Chinese frame more than likely you are going to have to stretch the frame to get it in there and make custom motor mounts
I have seen several Motomax 250 videos where the carbs had to be rejeted! Why doesn´t the factory put on decent jeted carbs or a FIS (fuel injection system)?
Wonder if the wheels would fit on a Hawk 250
What power jet you use ??
Can't wait to see what the mods will do to the top end :-)
Does it come with a title? Can you make it street legal?
yes most of the chinese bikes come with one or can be sent upon request.
We ship them with the documents you need to get it titled/registered.
Would you happen to know what crf230 parts are interchangeable?
I'm hoping that this type of bike is available in Australia be awesome beginners bike for me
Does this come with a title so you can register it???
I’m 5’2 am I too short for this bike?
Why do you shift without the clutch? I am new to this.]
Have y’all put a slip on pipe for it yet?
whats the mpg on this bike pal?
Does this bike need to have insurance
Where do u buy tires or where can I get four wheeler tires
That's a nice bike for what it's worth. Cheap and somewhat will built.
Chinese bikes all say 250, but they are all 230 cc!
What does will built mean
constructed, put together, assembled, erected, fabricated, made, pieced together.
@@roborobot9709 every brand is like that. A 250 is never a 250
@@Caniboss1 did you mean well built
not bad bro cool bike
👍👍love the music
Am I watching a tv show on discovery channel? The production value on this is way up from the TH-cam norm. I kind like it but I know I like the old way just my two cents.
👍👍from this guy
Nice bike bro
I have a question thats unrelated to the video
Someone is selling me a 1959 Hellcat go kart for under $100.
Is it a good buy?
I'm surprised you're not putting a Predator or a Duromax on it.
So you think the hawk is better
I didn't realize that you are from the Water! How bout that. Me, too.
Do you ever plan on selling any bikes?
When is someone going to put a "big bore" kit into one of these china bikes & you tube it? Some websites indicate they are available from the factory & cost seems to be under $250 US .
Wild ass intro
Any GPS black friday sales code coming out soon,
Yeah I'm actually impressed I'm going to sell all of my four wheelers which I have five of them and buy one of them hell yeah
I can’t wait to race you on da hawk brudder. Gotta luv cheap ole China bikes
How are you a bird to clutch list shoe this the upright have a quick shifter
I think it Will do the trick ...
Glad I'm not the only who forgets to cancel my signals.
Sporty looking, mousey compared to Japan bikes, however China is relentless in pursuing happiness. We are buying these because replacement parts are cheap and also we laughed at YAMAHA when they made a motorcycle on any Sunday part 1 now look at them. God bless China! And you all too💖
"God bless china" ummm okay?
I notice the enlarged sum an cooling fins that different to the original chinese 250, do they have a changeable oil filter added now? They really need one but gee the chinese farm bike I have has been flogged an still runs lol will need rings soon so I'd recommend better quality rings if your going to port an increase compression 😎
Looks like a reasonable bike, especially for the price. The choke looks like a pig to use and apart from that I don't see much to complain about.
the matomax 250cc will have an ABS brake system
Where is the virago 250?
Someone could make a ton of money if they made a cheap big bore kit for these.....Not sure how much more HP you could get out of it with just a bigger piston & cyl.
Chek every nut n bolt mate locktight em n carry a spare cdi they fail for fun have fun mate cheers
Should have done the tao tbr7 which is only 1300$ brand new and the same bike
so this is a semi-automatic?
Can you attach a Power commander at this and make it fuel injection
i'd say put a honda cr 500 in , but I doubt the chassis would handle it eh
Nice but I don't think I want to buy a motorcycle that has to be fixed before riding it.
The Chinese need to take note and fix that issue before they send it.
Motocheez has this bikes figured out...
All that cost for only 15 hp? Already time for a 870 swap.
So the bike is named Will, and is made Peace Sparts?
The name is the Motomax 250---but it has WILL graphics.
Hey ,
I am subscribed, the bell is checked, but I have stopped getting notifications!!!!
What's up with that???
I work right across from where the company sells these.
Come by to see one if you're in Norcross!