StillDragon® - 4" Crystal Dragon™ - Test Run w/ NEW 4" SuperRC

Watch testing the new 4" Super Reflux Condenser on top of a 4" Crystal Dragon™ with 4 bubble plates.
This video has been composed from several short snippets. It shows how easy it is to assemble the sight tower, an overview of the test setup, running the Dragon, and how the new Super Reflux Condenser helps saving cooling water.
StillDragon® User Group - Your one-stop resource for configuring & using the one and only completely modular distilling equipment!
For more information please visit our forum at www.StillDragon.org

[@user-zo4sf8sb3f]

دورود برشما و کارهای خوب تون بسیار شگفت انگیزهست

[@locumanias_2834]

Dear: video very good, a question what is the temperature of the water at the outlet of the first condenser 69 ° C?

[@StillDragonORG]

Hello Reinier, please be aware that our community members do not participate here in TH-cam comments. For any questions please visit our StillDragon® Community Forum at www.StillDragon.org Regards, Moonshine - The Administrator of the StillDragon® Community Forum

[@TPGMatt]

What temp are you running the still at from start to finish. Do you just set the voltage to an amount where the still temp reaches like 70 degrees or something? how do you know when to turn up power as well?

[@StillDragonORG]

Something like this is better asked at our StillDragon® Community Forum at www.StillDragon.org because our community members do not participate here in TH-cam comments. Please have a look and you will find a lifetime of reading material there. 😉

[@jbrunson1949]

Love it, ok been to site to buy and can't find the water adjustment valves shown at time 1:50-1:60, searched every category listed, any body that can help Ihave the same water lines with push in connect

[@StillDragonORG]

These valves are usually referred to as needle valves, but depending on which StillDragon® distributor website you are looking at, they are named differently. For example at the European website that items is named "Push Connect Throttle Check Valve" and you can find it in the Push Connects Hoses category below Components:
www.stilldragon.eu/en/push-connects-hoses/130-push-connect-throttle-check-valve.html
Please be aware that our community members and StillDragon® distributors do not participate here on TH-cam comments. Please visit our international StillDragon® Community Forum at www.StillDragon.org for asking any questions, or contact your responsible StillDragon® distributor directly (see links at the top of the forum page).

[@StillDragonORG]

Hello Reinier,
It's called "Push Connect Throttle Check Valve" or also "Needle Valve", depending on which distributor's website you visit. For example in Europe it can be found here:
www.stilldragon.eu/en/push-connects-hoses/130-push-connect-throttle-check-valve.html
Please be aware that our community members do not participate here in TH-cam comments. For any questions please visit our StillDragon® Community Forum at www.StillDragon.org
Regards,
Moonshine - The Administrator of the StillDragon® Community Forum

[@tomsuica8731]

I don't see you needing a double deflegmator? Have you ever ran it on more than 5-20% of power? Over 50%?

[@StillDragonORG]

Hello Tom, as can be seen, that was just a test run when the new SuperRC was a new product back then. Please be aware that our community members do not participate here in TH-cam comments. For more information, please have a look at our StillDragon® Community Forum at www.StillDragon.org where all things StillDragon® are going on ;-)

[@tomsuica8731]

@@StillDragonORG Yes, thank you for the link to the community, but you have left my question unanswered.

[@StillDragonORG]

@@tomsuica8731 I'm sorry that I can not be of help, because I'm neither directly involved in that topic nor did I create that video, I'm just the administrator of the StillDragon® Community Forum. As said, our community members do not participate here in TH-cam comments, so it's best to have a look and ask any question in the forum.

[@thomasedwin1]

Notice they never mention price.

[@StillDragonORG]

Prices are different depending in which region of the world you are. Please visit www.StillDragon.org and click the link to your appropriate StillDragon® distributor at the top for getting prices.

[@StillDragonORG]

Hello Thomas,
That should not come as a surprise, because prices differ depending on region (there are currently three different StillDragon® distributors covering the planet). See the links at the top of the community forum for further details depending on where you are located.
Please be aware that our community members do not participate here in TH-cam comments. For any questions please visit our StillDragon® Community Forum at www.StillDragon.org
Regards,
Moonshine - The Administrator of the StillDragon® Community Forum

[@flatbedtrucker]

StillDragon® User Group I know right Awesome Sill.... Dragon 🤙

[@FlickinTheBudgie]

If your a full blown it will pay off pretty quick plus you won’t have to drive to Dan Murphy’s every day