Yeah, I see. You do have to warm up the back panel to soften the glue on the taping to safely remove the panel. Nokia 8.3 and the 9 Pureview uses Gorilla Glass for the back panel. If you force it open, they do break, and "Ouch!" fingers get hurt by small glass particles. Yes, I know it very well... I screwed up my Nokia 9 Pureview that way.😜 I should have used a hair dryer to do that.🤪 I understand; removing the inner top circuit board is very important. The flat cover overlaps the battery which looks like just a piece of plastic flap contains very small circuit wiring which is part of the circuit board. You don't want to bend that to remove the battery because they are very fragile, and the circuit will easily break.☝🏻
Hallo, habe ich auch genau so gemacht wie im video. Also habe ich die alte Akku raus, die neue Akku rein getan, angeschlossen, paar schrauebn festgeschraubt und dann pribiert ob das Handy beim anschlissen zum laden reagiert. Handy war komplet aus und doch reagierte als den ladekabel zum laden ans Handy gesteckt habe. Heisst hat es kontakt zum laden sofort bekommen. Aber als ich dann komplett handy montiert habe deckel und alles, kein kontakt mehr...laddt gar bichts nehr. Was könnte bitte sein? Habe ich etwas falsch beim komplett montieren(nur nich akkudeckel und schrauben fest gezogen)?
I changed screen and battery for quite a few different brand phones in last few years, Samsung, Huawei, honor, RealMe. This time Nokia. They all looks similar inside. Small difference in screw count and position
Yeah, I see. You do have to warm up the back panel to soften the glue on the taping to safely remove the panel. Nokia 8.3 and the 9 Pureview uses Gorilla Glass for the
back panel. If you force it open, they do break, and "Ouch!" fingers get hurt by small glass particles. Yes, I know it very well... I screwed up my Nokia 9 Pureview that way.😜
I should have used a hair dryer to do that.🤪
I understand; removing the inner top circuit board is very important. The flat cover overlaps the battery which looks like just a piece of plastic flap contains very small circuit
wiring which is part of the circuit board. You don't want to bend that to remove the battery because they are very fragile, and the circuit will easily break.☝🏻
What machine do you use at the beginning? Something blowing hot air?
Hallo, habe ich auch genau so gemacht wie im video.
Also habe ich die alte Akku raus, die neue Akku rein getan, angeschlossen, paar schrauebn festgeschraubt und dann pribiert ob das Handy beim anschlissen zum laden reagiert. Handy war komplet aus und doch reagierte als den ladekabel zum laden ans Handy gesteckt habe. Heisst hat es kontakt zum laden sofort bekommen.
Aber als ich dann komplett handy montiert habe deckel und alles, kein kontakt mehr...laddt gar bichts nehr.
Was könnte bitte sein? Habe ich etwas falsch beim komplett montieren(nur nich akkudeckel und schrauben fest gezogen)?
Pistola de calor se llama ,
Está interesante el cambio de pila pero no da referencia de dónde comprar la batería Nokia 8.3
is that nokia8.35g battery available in the market
yes
Where can i buy nokia 8.3 5g battery ?
Why do all those screws need to be taken out? Seems unrelated to the battery.
Good afternoon. Tell me what is the width of the adhesive tape?
0.2mm
@@disassemblephone9400Where do you buy them and what is the part number?
@@disassemblephone94000.2?!? You're kidding, right? 😁
Hi there , is nokia 8v 5g battery different from nokia 8.3?
different
@@disassemblephone9400 thanks bro
I have to go thru all this to change the battery...?
Had I know about this...
I don't buy any Nokia....
Sauerei...!!!
I changed screen and battery for quite a few different brand phones in last few years, Samsung, Huawei, honor, RealMe. This time Nokia. They all looks similar inside. Small difference in screw count and position
Great manicure. Did your husband like it?
😧
Say please
please