Thanks, I have a similar inverter that will charge as low as 50v from the panels. I could not figure out why this inverter would not charge the batteries. Your video quickly provided the answer after I had searched through the manual several times
Thank you for reaching out! If the inverter is having a blinking AC icon this is indicating that the inverter is not recognizing the generator. If the AC input icon is blinking that means that there is something going on with the generator itself. The generator is providing too high or low of a voltage and frequency which is why the inverter is not picking up the generator. After checking these, test and verify the generator and if it does not work, feel free to reach out to our tech support at tech.na@phocos.com
Thank you for reaching out! We want to help you find answers/solutions to your problem as soon as possible, to do this please visit phocos.com/contact/#contactech. Here, you'll fill out a form so that you get in contact with the right tech support in your region.
Good day.... how do I go about a F72 fault? We have 3 x 5kv installed, unit 1 is working thats a SL unit, the other SL unit is at fault and the H5 is at fault, both F72.
Thank you for taking the time to watch and comment on our video. Due to the nature of your question it would be best to direct you to our technical team so that we can get you taken care of as soon as a possible. For all your technical questions please visit www.phocos.com/contact/#contactech2
Hi, so i have a 24v 3000w PowMr inverter. I attached a portable 400w solar panel but there is no solar displaying on the inverter. I'm getting 36v on the solar terminals coming from the pannel but the unit shows no solar displaying. The grid is charging my 24v battery and powering load but no solar
Hello and thank you for your comment! Unfortunately we cant speak to other products. What we can tell you is that 36v on a 3000w inverter is very low voltage which could be a reason why it is not displaying the solar. Feel free to contact us if you have interest in our Phocos products. www.phocos.com/contact/#contactech2
Hi.. I have 1500 watt romex inverter and 2 panel each panel 545 watt and 48 volt.. 2 panel 97 volt dc in series and the inverte not working and not chargin the battery.. The voltage battery is 12.3 volt its not dead.. And the icon of panel on inverter is flashing and not charging
Thank you for commenting on our video. We are sorry to hear that you're having some issues with the Any-Grid but we want to help. Please reach out to us on our website www.phocos.com/contact/#contactech. One of our techs would be happy to assist you.
Hi there! I would like to add to this question an answer as very recently this happened to me! A reason your battery’s won’t charge is that you have a different set of mppt and panels trying to charge the same battery bank or even a wind generator The phocos and probably any other mppt you have will read voltage on the battery and won’t charge them as it thinks cause of the voltage being high that the batteries are fully charged.. This is a problem for me because I can’t use some of my older pv’s Any advice from phocos? Thank you in advance
Hello, thank you for reaching out to us. If we are understanding your question correctly, you have an Any-Grid and a separate MPPT charge controller running in parallel to the same battery bank? If our assumption is correct, then in theory this should be ok. There are a few things that must be true to avoid any charging issues. The first is that both chargers must have the same charging parameters. This will require that you use a user defined charge profile on the Any-Grid (menu 05) and match it to the MPPT or vice versa. Voltage drop is another important consideration. Make sure that both the standalone MPPT and Any-Grid are near the battery bank. We hope this answers your question, if not please reach out to our technical support team, they are always here to help! www.phocos.com/contact/#contactech
Hello, thank you for reaching out to us. The Any-Grid family of inverters allows you to program your AC-output priorities using three different modes. For example, setting menu 01 to USB would mean that the grid would first power your loads, then solar in the grid’s absence, and lastly your battery. In any mode, the inverter will use all your available power from the available source to power loads, sometimes using two sources at the same time. For example, if you are in USB mode and the grid fails, the inverter will use all its available solar to power your loads, borrowing from your battery when it needs to. Therefore, it’s possible that in some situations you may using the grid and a DC source to power your loads at the same time. I hope this answers your question. If doesn’t, please reach out to our tech team here: www.phocos.com/contact/#contactech They are always happy to answer any questions.
Thanks sir I have 6kv inverter. Our inverter is not charge the battery from solar pannel. I don't know But i connet utilise then charge from solar and house load transfer to utilities. But solar power available sapare more than 2000watt . Thanks
Hello, thank you for reaching out! Because of the nature of your issue we must insist on you filling out a tech form on our website phocos.com/contact/#contactech2. This way we can get one of our technical staff to assist you further.
Hello, thank you for reaching out! In order to get our tech team the right info you’ll need to go to our website and fill out the contact tech form at Phocos.com/contact. Thank you!
Hello and thank you for your comment. We cannot speak to different brands of inverters. Unfortunately, you will have to reach out to the manufacture for this issue. Feel free to look at our Phocos website if you would like more information about our 6.5 kw Inverter. www.phocos.com/product/psw-h-hybrid-inverter-charger/
Hello, thank you for your question. We are eager to offer support. Please reach out directly to our technical department here: www.phocos.com/contact/#contactech
Thank you very much, I have been struggling for a week with settings, but no success. You answered my question spot on with the higher than 90v tip!
We're happy that our video was able to help you out!
Thanks, I have a similar inverter that will charge as low as 50v from the panels.
I could not figure out why this inverter would not charge the batteries. Your video quickly provided the answer after I had searched through the manual several times
We are glad that were able to help!
Hey, i have a problem with phocos inverter. I have uploaded shorts video about it, any advice?
Thanks for reaching out! We've taken a look at your video and we recommend to contact tech support in your region. phocos.com/contact/#contactech2
Hey. Thanks for this. How about charging batteries with generator? Inverter does not seem to take generator output.
Thank you for reaching out! If the inverter is having a blinking AC icon this is indicating that the inverter is not recognizing the generator. If the AC input icon is blinking that means that there is something going on with the generator itself. The generator is providing too high or low of a voltage and frequency which is why the inverter is not picking up the generator. After checking these, test and verify the generator and if it does not work, feel free to reach out to our tech support at tech.na@phocos.com
hey, my hybrid inverter doesn't change the lithium battery while the grid is off, it drains some power off the battery even there's enough sunlight
Thank you for reaching out! We want to help you find answers/solutions to your problem as soon as possible, to do this please visit phocos.com/contact/#contactech. Here, you'll fill out a form so that you get in contact with the right tech support in your region.
Good day.... how do I go about a F72 fault? We have 3 x 5kv installed, unit 1 is working thats a SL unit, the other SL unit is at fault and the H5 is at fault, both F72.
Thank you for taking the time to watch and comment on our video. Due to the nature of your question it would be best to direct you to our technical team so that we can get you taken care of as soon as a possible. For all your technical questions please visit www.phocos.com/contact/#contactech2
Hi, so i have a 24v 3000w PowMr inverter. I attached a portable 400w solar panel but there is no solar displaying on the inverter. I'm getting 36v on the solar terminals coming from the pannel but the unit shows no solar displaying. The grid is charging my 24v battery and powering load but no solar
Hello and thank you for your comment! Unfortunately we cant speak to other products. What we can tell you is that 36v on a 3000w inverter is very low voltage which could be a reason why it is not displaying the solar. Feel free to contact us if you have interest in our Phocos products. www.phocos.com/contact/#contactech2
@@phocos-global thank you. That is exactly the reason. Thanks for your help.
Hi.. I have 1500 watt romex inverter and 2 panel each panel 545 watt and 48 volt.. 2 panel 97 volt dc in series and the inverte not working and not chargin the battery.. The voltage battery is 12.3 volt its not dead.. And the icon of panel on inverter is flashing and not charging
Thank you for commenting on our video. We are sorry to hear that you're having some issues with the Any-Grid but we want to help. Please reach out to us on our website www.phocos.com/contact/#contactech.
One of our techs would be happy to assist you.
Hi there!
I would like to add to this question an answer as very recently this happened to me!
A reason your battery’s won’t charge is that you have a different set of mppt and panels trying to charge the same battery bank or even a wind generator
The phocos and probably any other mppt you have will read voltage on the battery and won’t charge them as it thinks cause of the voltage being high that the batteries are fully charged..
This is a problem for me because I can’t use some of my older pv’s
Any advice from phocos?
Thank you in advance
Hello, thank you for reaching out to us. If we are understanding your question correctly, you have an Any-Grid and a separate MPPT charge controller running in parallel to the same battery bank? If our assumption is correct, then in theory this should be ok. There are a few things that must be true to avoid any charging issues. The first is that both chargers must have the same charging parameters. This will require that you use a user defined charge profile on the Any-Grid (menu 05) and match it to the MPPT or vice versa. Voltage drop is another important consideration. Make sure that both the standalone MPPT and Any-Grid are near the battery bank. We hope this answers your question, if not please reach out to our technical support team, they are always here to help! www.phocos.com/contact/#contactech
Is IT possible to get a part from AC and the Rest from the battery for the AC load? Coudn't find a configuration for that yet...
Hello, thank you for reaching out to us. The Any-Grid family of inverters allows you to program your AC-output priorities using three different modes. For example, setting menu 01 to USB would mean that the grid would first power your loads, then solar in the grid’s absence, and lastly your battery.
In any mode, the inverter will use all your available power from the available source to power loads, sometimes using two sources at the same time. For example, if you are in USB mode and the grid fails, the inverter will use all its available solar to power your loads, borrowing from your battery when it needs to.
Therefore, it’s possible that in some situations you may using the grid and a DC source to power your loads at the same time. I hope this answers your question. If doesn’t, please reach out to our tech team here: www.phocos.com/contact/#contactech They are always happy to answer any questions.
Thanks sir
I have 6kv inverter.
Our inverter is not charge the battery from solar pannel. I don't know
But i connet utilise then charge from solar and house load transfer to utilities. But solar power available sapare more than 2000watt .
Thanks
If utilities disconnect with inverter,
Inverter also stop the charging from utilities
Hello, thank you for reaching out! Because of the nature of your issue we must insist on you filling out a tech form on our website phocos.com/contact/#contactech2. This way we can get one of our technical staff to assist you further.
Hello, Y have an eror code to an Any grid 5kw , eror code is F 90- wat is the meaning of this?
Hello, thank you for reaching out! In order to get our tech team the right info you’ll need to go to our website and fill out the contact tech form at Phocos.com/contact. Thank you!
Y HAVE CONTACT THE TECH DEPARTMENT, NO ANSWER. I AM VERY DEDISAPPOINTED WITH THE WAY YOU MANAGE TECHNICAL SUPPORT, PRODUCT WARRANTY.@@phocos-global
Hey bro i have 6.5 kw solar system it has a fronus inverter and 4 batteries it is not charging above 55
Hello and thank you for your comment. We cannot speak to different brands of inverters. Unfortunately, you will have to reach out to the manufacture for this issue. Feel free to look at our Phocos website if you would like more information about our 6.5 kw Inverter. www.phocos.com/product/psw-h-hybrid-inverter-charger/
Trying to jump start a brand new small system to start charging the batteries. Batteries won’t charge yet. Reading 90 volts from panels
Hello, thank you for your question. We are eager to offer support. Please reach out directly to our technical department here: www.phocos.com/contact/#contactech
Phocos nnit answer mail with eror ??????
Than you for reaching out. To better assist you please visit www.phocos.com/contact/#contactech2 to get in touch with out technical staff
Phocos invertor erori 90 ?????????????
Than you for reaching out. To better assist you please visit www.phocos.com/contact/#contactech2 to get in touch with out technical staff