Might that include a tool for those Gerber nuts with the 4 indents? My Armbar Cork desperately needs one so I can loosen it enough to enjoy using it instead of dreading it.
@@PetesGuide that's definitely on the list 😁 Do you know if those screw heads are all the same size? I only have a couple or Gerber tools so I need to do some testing...
@@PetesGuide I've confirmed the MP400, MP600, and center drive all have the same size pivot screws. I'm guessing the armbar is the same, but if you do grab a measurement lmk. I think they were 7.3 mm.
There is a third way to unscrew these suckers. Make a hole in aluminium bar, thickness 1mm or so, slightly smaller than these nuts.Big nut is 7,10mm, so let say 7, or something like 7,05. Put it on these nuts and press it in vice. Relatively softer aluminium will deform and make a wrench :) Grind the rest according to needs. With LM Charge+ there is no problem at all. Found somewhere on internet that it's doable. And there is a fourth way ;) Make a cut file and send it to be cut in metal, easy as that.
@@maxlvledc I have thought about just cutting down some handles. I’ve done with with the Irwin cobra style pliers and was happy with them. I just need to muster the courage
Not related to your video at all but do you have a suggestion for a knife like the Kershaw Barge? A useful solid state pry bar integrated into a folding knife?
Love your vids very informative.. one Q, does disassembly and reassembly with changing anything void the warranty?!! will they notice from the screws that the tool has been disassembled ?!!
On the old floppy Supertool from my father i used on one side a mini vice and on the other my trusty Swisstool X, worked quite nice. Tried to send it to leatherman germany before but they did not fix it. great warranty. Btw. where are the new reviews on the Goat tool? please make more videos about it.
There was a leatherman adjustment tool I found on ebay at some point that worked with 4 different sizes of the knurled leatherman screws. Came in a pack of two and was setup into a plus/cross style arrangement. Can't remember what the name of it was and I can't seem to find it on ebay anymore either.
I have a PST and the smaller tools clump together when you try use them. I tried WD40 and tried to loosen them that way, to very little success. I wonder if this tool would work?
japanese tools are great. monotaro is amazing its in japanese but u can auto translate and im telling u ud easy spend a few hours looking at just hand tools
I've tried and tried to find something like this. Not sure if anywhere let's you get custom Chicago screws, I think that's what they are called. So many names too.
I've seen that some of the Kick clips are still available through Leatherman in Europe. If you don't have a pen pal there though, I've seen some 3d printed clips for the Kick being developed.
@@PetesGuide not sure if I can post links in the comments but it’s at the link in the description; either the eBay one of the one to MultiParts Store should get you there!
hi there max, looking for a trade for a tactical flashlight n batts. perhaps if you know anybody , i have blades/etc for trade here , talk soon , > tom !
@@maxlvledc ok, not on there or social media here either , if you know any guys , send em my way PLEASE , i have a titanium blade here worth 170$ + others i can give up so ?, thanks > tom !
Tell me if I'm wrong. 30 American $ for the tool that will ajust tool the size of Rebar?It cost 4$ to ship it to an appropriate place to get basically brand new 100$ can tool. Unless you want to do it most difficult and expensive way.
Thanks for covering these! We're very excited to be launching these wrenches and hope to have some additional options available in the future.
Wish you the best of luck!
Might that include a tool for those Gerber nuts with the 4 indents? My Armbar Cork desperately needs one so I can loosen it enough to enjoy using it instead of dreading it.
@@PetesGuide that's definitely on the list 😁
Do you know if those screw heads are all the same size? I only have a couple or Gerber tools so I need to do some testing...
@@zachlyndeYT I don’t know, and I only have the one Gerber, but I do have a pair of calipers! Where shall I send the measurements?
@@PetesGuide I've confirmed the MP400, MP600, and center drive all have the same size pivot screws. I'm guessing the armbar is the same, but if you do grab a measurement lmk. I think they were 7.3 mm.
I am somewhat about to mod my Leathermans for the first time so I really appreciate the information. Thanks mate!
There is a third way to unscrew these suckers. Make a hole in aluminium bar, thickness 1mm or so, slightly smaller than these nuts.Big nut is 7,10mm, so let say 7, or something like 7,05. Put it on these nuts and press it in vice. Relatively softer aluminium will deform and make a wrench :) Grind the rest according to needs. With LM Charge+ there is no problem at all. Found somewhere on internet that it's doable.
And there is a fourth way ;) Make a cut file and send it to be cut in metal, easy as that.
Got 'em! Thanks for this for sure!
Knipex needs to make a whole line of smaller twin grips. If they did they would probably replace my edc Cobras
I second this.
Stop it...that's too good..
@@maxlvledc I have thought about just cutting down some handles. I’ve done with with the Irwin cobra style pliers and was happy with them. I just need to muster the courage
Not related to your video at all but do you have a suggestion for a knife like the Kershaw Barge? A useful solid state pry bar integrated into a folding knife?
Love your vids very informative.. one Q, does disassembly and reassembly with changing anything void the warranty?!! will they notice from the screws that the tool has been disassembled ?!!
Thinking about getting these for my micra. Great video
On the old floppy Supertool from my father i used on one side a mini vice and on the other my trusty Swisstool X, worked quite nice. Tried to send it to leatherman germany before but they did not fix it. great warranty. Btw. where are the new reviews on the Goat tool? please make more videos about it.
There was a leatherman adjustment tool I found on ebay at some point that worked with 4 different sizes of the knurled leatherman screws. Came in a pack of two and was setup into a plus/cross style arrangement. Can't remember what the name of it was and I can't seem to find it on ebay anymore either.
Awesome video Sir. I was able to buy the Russian made parse wrenches, a few years back. They make modding so much easier. Keep up the fine work. :)
Just ordered a set.
I have a PST and the smaller tools clump together when you try use them. I tried WD40 and tried to loosen them that way, to very little success. I wonder if this tool would work?
10:30 Fine Tools have them in stock
Cowabunga mate.!
japanese tools are great. monotaro is amazing its in japanese but u can auto translate and im telling u ud easy spend a few hours looking at just hand tools
I wonder if there are any aftermarket torx screws for the leatherman models that don't already have them.
I've tried and tried to find something like this. Not sure if anywhere let's you get custom Chicago screws, I think that's what they are called. So many names too.
It's a custom thread size...sigh.
Is there some one who makes the packet clip for the leather kick? I’ve been looking for one forever
Same
I've seen that some of the Kick clips are still available through Leatherman in Europe. If you don't have a pen pal there though, I've seen some 3d printed clips for the Kick being developed.
@@billychef1571 do you know whose making them or have a link?
The Kick was my first Leatherman, and I've always regretted not buying a clip. Add me to the list lol
I wonder if you could bend and cut one of the wrenches to work, but it just seems weird that you can’t just buy the part anywhere.
Does anyone make a driver that exactly fits those funky Gerber nuts with the four indents, to avoid all marring?
We do now!
@@zachlyndeYT link?
@@PetesGuide not sure if I can post links in the comments but it’s at the link in the description; either the eBay one of the one to MultiParts Store should get you there!
Couldn't find the link
Not to interrupt, but the link for the flat wrenches are in my bio if that's what you were looking for.
hi there max, looking for a trade for a tactical flashlight n batts. perhaps if you know anybody , i have blades/etc for trade here , talk soon , > tom !
Best damn edc's discord is a good place to trade
@@maxlvledc ok, not on there or social media here either , if you know any guys , send em my way PLEASE , i have a titanium blade here worth 170$ + others i can give up so ?, thanks > tom !
Tell me if I'm wrong.
30 American $ for the tool that will ajust tool the size of Rebar?It cost 4$ to ship it to an appropriate place to get basically brand new 100$ can tool. Unless you want to do it most difficult and expensive way.
❤
Wanna take micra apart 😢