I wondered right away when you dry started it that you didn’t add oil. I don’t believe they ship motors with oil in them for many reasons. Sometimes it pays to slow down and read the manual before any damage is done. Always enjoy your energy and enthusiasm in your videos.
You guys are clueless. 4 stroke needs oil. Gearcase needs oil. There is no reverse, you turn the motor around. The throttle is not a cruise control. All tiller motors I've ever seen, do not work like a motorcycle, but throttle stays where you put it. It sounds like a lawnmower because it's air cooled.
Temu sells stuff from Chinese OEM’s. These manufacturers do all the named brands sold in the U.S. that’s why they cannot sell engines with the same cover or cosmetic design with some of the more good looking engines. You know that good looking costs you a thousand bucks.
Needs a wrist kill switch on a boat like that. All I can see is this thing coming across the lake and snaking the side of my boat because the operator fell out.
When talking about reversing out of the dock he sounds like every current American politician "I just didn't care to read the instructions" and "should've checked to see if this thing had reverse" 😂😂😂
i picked up the same motor off there last month as needed to move a sailboat project i picked up 4 marinas over just over 3 miles and moved the westerly 22 fine was only doing 4mph but that was against the tide and a 3 ton boat was cheaper then paying out for a tow and got me there and now just use it on a 2 meter inflatable boat what it powers great for playing about the marina
Just get a yamaha malta 3.5hp.. plenty of them out there for 200 bucks.. also guaranteed ur not losing any money on it.. so basically free.. sell it again in 10 years,.. for more even. They used to be on all rental sailboats out here.. nowadays its more 4strokes.. even those are like 400 bucks.. lot better investment then a temu pos.
@@larsvegas1505 i know they are i just needed something to move the boat to the next boat yard that was going to lift out the boat to go onto hard standing as need to put a new inboard engine in and do lot of work on the boat be for it go's back in the water
adjust the motor up or down to get the cavitation plate even with the bottom of the boat youll save fuel and you may even be able to hit 10 miles constant also change the spark plug the chinese plugs are notorius for failing at ridicolously short amounts of time not sure where the governor is set for that motor but experiment with it remember the governor arm could have extra holes in to adjust the spring pressure and you can always put it back if theres no improvement lastly you can play with the propellor a few years back those china motors were shipping with a propellor thatwas to much for the engine and wouldnt allow the engine to reach the 3400 rpm mark ill close by saying 7mph constant with that a bit seems a bit slow ten constant constant would be better keep mind that at some point that is gonna fail to crank while your on the water it will feel seized but in reality it wont be seized it be hydro locked with oil because the cylinder is facing down and the cylinder filled with oil that being said take tools with you so you dont get stuck in the middle of a lake somewhere
Cool motor man. I’ve been eyeballing a slightly smaller unit. The smaller one has a lower unit that looks more like an outboard and less like just a pipe. I keeping looking at it and thinking “how big of a motor could I put on there”. Like if the bolt patterns are all the same for every horizontal shaft motor up to a certain size, I would try to find an old lawnmower with like a broken self propel system to rip the motor off of. My goal for this motor would be saltwater so swapping the engine to one like Honda or Briggs would make me feel more comfortable. Side note it sounds like the throttle could use some adjustment. I hear probably 6 clicks before the rpm picks up. Maybe a poor adjustment means it also isn’t going full throttle and you may be able to get even more speed out of it. Cool video man.
I am a musician. Make sure not to have your audio gain too high there is distortion when you are on the water. better luck next time. thanks for previewing this motor
Look at the current crop of lawnmowers, snowthrowers, tillers. So many are now powered by Powermore, Predator engines, and they do just fine. Even Chinese motorcycles have really good engines on them.
I guess you don’t need to worry if it breaks down you can row to shore but here we go 5-13 miles offshore to catch Tuna .. I’ve gone 5 miles offshore in my little 10 foot boat before but if it breaks down you best have cell reception or a vhf radio because next stop if your drifting is the Philippines and that could be a year long drift
@@realnews6896 😄 that proves nothing but user error. But yes i think they got money to test but i am sure they where simply to unskilled or homer simpson
@@marcbeebee6969 i know temu will give discounts for positive reviews in the US for more sales but I’m giving the creator the benefit of the doubt … I do wonder where his personal information is though.. lots of youngsters don’t get in communism it’s a “shared “ collective what you own belongs to the party and they can take it at any time they want
@@marcbeebee6969 I trust China and the Chinese as far as I can throw their country.. lots of Chinese live here in Hawaii … the Hawaiian word for Chinese is Pake it means tight greedy or stingy and trust me most Chinese from China will sell their mother to make a buck .. try and skimp out using the cheapest means possible ( I had a customer who insisted his twin outboards needed new spark plugs when I could clearly see he needed his carburetors cleaned and rebuilt I ended up selling him 8 plugs and 2 carb rebuilds because of his stubbornness to insist I did not know my job ) no I’m not racist I just learned their manners and customs and adapt around it or beware when dealing with them
@@masonoertli4099 these dont have a reverse. You spin the motor backwards to get reverse. And these engines mostly are normal shaft, so neither long or short shaft.
@@WarrenBerdon doesn’t really matter considering you can get a 20 hp lawnmower power head to replace that with for a couple hundred bucks and who cares if you can outrun a jet ski???
Boats not big enough to keep the motor on the transom? are you out of your mind? so everyone else in the world that has a 14ft jon is wrong and your right? Sell your boats...
Duh. Dont read instruction Dont check oil. Reverse is fully rotate on the shaft. Dont use safety cut off and dont wear life jackets. Dont bother running in the motor. Laugh and giggle think people want to listen. Boys and girls please learn from these two cartoon characters what not to do
How much did the Chinese offer you to make such good things about their junk ? I own an outboard motor repair shop in Hawaii and been certified by Mercury Marine since I was 14 … yes the Honda 2 hp is Honda’s lawnmower motor but I got more faith in it than something from China and how do you feel about the ccp getting your personal information?
@@WarrenBerdon they ain’t paid me to say anything, any kind of way. It was all in good fun and my joy is true. I am no sellout. You can buy these same motors on Amazon, Walmart and anywhere els. Im sure you’ve never shopped on Amazon, or Walmart or eBay tho. If Honda,Merc, Suzuki, or Yamaha sold a $280 motor bet your bum I’d be testing those for fun to. Have a good one brother.
@@TightlineTV I don’t buy motors …. I take wasted motors that’s cheaper to replace in when I rig a repower wait till I get another for parts then use parts from 2 to make 1 … my little boat I use for fishing is 10 feet long with a Mercury 25 horse I rebuilt and tweeked for speed after my test ride I named my little boat suck my wake why I can outrun jet skis and overturn kayaks and paddle boarders for fun and laughs blowing by them
@@GeorgiaRidgerunner I’m not harassing anyone I’m leaving the boat harbor racing to the breakwater to go to open sea … as far as my truck and tires everyone in the harbor knows I’m the only locally owned outboard repair shop and dealership one and two I cut my customers a lot of breaks when I can so you think my tires would be slashed as far as my own safety I joined the USMC and did that before returning home
![เปิด อาณาจักร หมื่นล้าน "สาระตั้ม" l [Nickynachat]](http://i.ytimg.com/vi/3XE0nPF4YkQ/mqdefault.jpg)
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
I wondered right away when you dry started it that you didn’t add oil. I don’t believe they ship motors with oil in them for many reasons. Sometimes it pays to slow down and read the manual before any damage is done. Always enjoy your energy and enthusiasm in your videos.
I was going to comment same thing
Yeah , no oil, for sure
oil and gear oil! they ship dry! 😂🍻
100%needs gear oil and never star outboards without a running water or water tub as water stops from overheating
I'm impressed by the motor.
Them, not so much.
Two grown men and it never crossed the mind of either one of them that it needed motor and foot oil.
You guys are clueless. 4 stroke needs oil. Gearcase needs oil. There is no reverse, you turn the motor around. The throttle is not a cruise control. All tiller motors I've ever seen, do not work like a motorcycle, but throttle stays where you put it. It sounds like a lawnmower because it's air cooled.
The last Temu motor you had to add lower unit oil. Then you do have to add you regular engine oil. They cannot ship them with oil in them.
Temu sells stuff from Chinese OEM’s. These manufacturers do all the named brands sold in the U.S. that’s why they cannot sell engines with the same cover or cosmetic design with some of the more good looking engines. You know that good looking costs you a thousand bucks.
engines never ship with oil, or gear oil in the lower unit. oil and gear oil!🍻
Needs a wrist kill switch on a boat like that. All I can see is this thing coming across the lake and snaking the side of my boat because the operator fell out.
When talking about reversing out of the dock he sounds like every current American politician "I just didn't care to read the instructions" and "should've checked to see if this thing had reverse" 😂😂😂
Lolol
. Knew immediately that adding oil was overlooked.
Did you check oil in lower unit???
reverse is just spinning the motor around backwards
i picked up the same motor off there last month as needed to move a sailboat project i picked up 4 marinas over just over 3 miles and moved the westerly 22 fine was only doing 4mph but that was against the tide and a 3 ton boat was cheaper then paying out for a tow and got me there and now just use it on a 2 meter inflatable boat what it powers great for playing about the marina
Just get a yamaha malta 3.5hp.. plenty of them out there for 200 bucks.. also guaranteed ur not losing any money on it.. so basically free.. sell it again in 10 years,.. for more even. They used to be on all rental sailboats out here.. nowadays its more 4strokes.. even those are like 400 bucks.. lot better investment then a temu pos.
@@larsvegas1505 i know they are i just needed something to move the boat to the next boat yard that was going to lift out the boat to go onto hard standing as need to put a new inboard engine in and do lot of work on the boat be for it go's back in the water
adjust the motor up or down to get the cavitation plate even with the bottom of the boat youll save fuel and you may even be able to hit 10 miles constant also change the spark plug the chinese plugs are notorius for failing at ridicolously short amounts of time not sure where the governor is set for that motor but experiment with it remember the governor arm could have extra holes in to adjust the spring pressure and you can always put it back if theres no improvement
lastly you can play with the propellor
a few years back those china motors were shipping with a propellor thatwas to much for the engine and wouldnt allow the engine to reach the 3400 rpm mark ill close by saying 7mph constant with that a bit seems a bit slow ten constant constant would be better keep mind that at some point that is gonna fail to crank while your on the water it will feel seized but in reality it wont be seized it be hydro locked with oil because the cylinder is facing down and the cylinder filled with oil that being said take tools with you so you dont get stuck in the middle of a lake somewhere
The old classic upside down cylinder
@@NicceStuff more like slightly canted at downward angle
@@GeorgiaRidgerunner the old classic canted at a downward angle cylinder
Cool motor man. I’ve been eyeballing a slightly smaller unit. The smaller one has a lower unit that looks more like an outboard and less like just a pipe. I keeping looking at it and thinking “how big of a motor could I put on there”. Like if the bolt patterns are all the same for every horizontal shaft motor up to a certain size, I would try to find an old lawnmower with like a broken self propel system to rip the motor off of. My goal for this motor would be saltwater so swapping the engine to one like Honda or Briggs would make me feel more comfortable. Side note it sounds like the throttle could use some adjustment. I hear probably 6 clicks before the rpm picks up. Maybe a poor adjustment means it also isn’t going full throttle and you may be able to get even more speed out of it. Cool video man.
3:22 it is a lawn mower without knife and 4 wheels. Not expecting else
I am a musician. Make sure not to have your audio gain too high there is distortion when you are on the water. better luck next time. thanks for previewing this motor
Dude I don't even have a boat and I wanna buy this motor lol....
Me too
Got same motor off Amazon, my clutch broke, do you know where to get parts for it yet?
I bought mine from Amazon, Arrived yesterday with no instructions hope I get it on the water by this weekend
hope you did not the same mistake like him and didnt add oil to the gear box and engine. You should do that.
Do you put oil the gears
Two guys and you did 8 miles an hour that's pretty awesome
How long will it last tho???? That’s the real question. I’d like to see how it holds up after 2 years
Look at the current crop of lawnmowers, snowthrowers, tillers. So many are now powered by Powermore, Predator engines, and they do just fine. Even Chinese motorcycles have really good engines on them.
It is a lawnmower engine on a outboard gear set up , not surprising from temu
I guess you don’t need to worry if it breaks down you can row to shore but here we go 5-13 miles offshore to catch Tuna .. I’ve gone 5 miles offshore in my little 10 foot boat before but if it breaks down you best have cell reception or a vhf radio because next stop if your drifting is the Philippines and that could be a year long drift
But nice girls, might be worth it
They got money from temu to act like it would start with no oil in the motor. Scam
@@realnews6896 😄 that proves nothing but user error. But yes i think they got money to test but i am sure they where simply to unskilled or homer simpson
@@marcbeebee6969 i know temu will give discounts for positive reviews in the US for more sales but I’m giving the creator the benefit of the doubt … I do wonder where his personal information is though.. lots of youngsters don’t get in communism it’s a “shared “ collective what you own belongs to the party and they can take it at any time they want
@@marcbeebee6969 I trust China and the Chinese as far as I can throw their country.. lots of Chinese live here in Hawaii … the Hawaiian word for Chinese is Pake it means tight greedy or stingy and trust me most Chinese from China will sell their mother to make a buck .. try and skimp out using the cheapest means possible ( I had a customer who insisted his twin outboards needed new spark plugs when I could clearly see he needed his carburetors cleaned and rebuilt I ended up selling him 8 plugs and 2 carb rebuilds because of his stubbornness to insist I did not know my job ) no I’m not racist I just learned their manners and customs and adapt around it or beware when dealing with them
Bro i don't think he put oil in it damm 😂😂😂😂
My thoughts exactly Did not check oil
Remove the governor and see what you can get out of it lol
Hey! Please keep up on this review after you have some time on this motor?
Many small engines won't start if there is little or no oil in it. I'm surprised it even started
How long is the boat
Who works on them in the usa what about getting parts for them
Faut peut etre mettre de lhuile dans le moteur et l embase non?
Basically, a mud motor set up... 🍺🎣
Did it end up having reverse? And what’s the shaft length on it?
What size boat did you have it on?
@@masonoertli4099 these dont have a reverse. You spin the motor backwards to get reverse. And these engines mostly are normal shaft, so neither long or short shaft.
Dude, it's called a breakin period.😮
That a good lil biter lol a it good for the price
Need to try taking the power head off and see if you can fit a 20 HP powerhead on it
@@thatoneguy5495 nah the 4 strokes don’t got the Rpm like a 2 stroke better get a Mercury 25 horse and outrun jet skis like me
@@WarrenBerdon doesn’t really matter considering you can get a 20 hp lawnmower power head to replace that with for a couple hundred bucks and who cares if you can outrun a jet ski???
@@thatoneguy5495 I paid for just the paper to cut gaskets for my 25 so maybe 5 bucks
Can you hook a larger gas tank to it?
No but you can put one in a boat with you
Temu😂😂😂😂
Is it Teamoo or Teamew?
Temu
How would you guys know he didn’t put oil in it clearly they did it off camera
8mph screeming
At least you know nobody will steel it.
good video man but get a new mic plz. your voice too damn loud for that baby mic to process well.
That was not a nuff oil lol
My guess is 6.
8 mils per hour
Take the gov out of it
Doer's seize their engines
Boats not big enough to keep the motor on the transom? are you out of your mind? so everyone else in the world that has a 14ft jon is wrong and your right? Sell your boats...
Duh. Dont read instruction
Dont check oil. Reverse is fully rotate on the shaft.
Dont use safety cut off and dont wear life jackets.
Dont bother running in the motor.
Laugh and giggle think people want to listen.
Boys and girls please learn from these two cartoon characters what not to do
@@geoffb108 are you mad? You sound pretty mad
No definitely not. Just wise and experienced I don't try to look stupid in an attempt to amuse
Hi every body . I gought this machine before . this is a toy . .is not reliable . very low quality . wasted my time
The no oil break in maybe one of the funniest things I've seen on TH-cam in a while. Turbocharge it. 😆
Reverse is just turn the motor all the way around backwards
Absolutely NO BREAK IN..???
Zero Mechanical Knowledge..!
@@SovereignEntity-63 2+2=4
Rocket science and shit..
How much did the Chinese offer you to make such good things about their junk ? I own an outboard motor repair shop in Hawaii and been certified by Mercury Marine since I was 14 … yes the Honda 2 hp is Honda’s lawnmower motor but I got more faith in it than something from China and how do you feel about the ccp getting your personal information?
@@WarrenBerdon they ain’t paid me to say anything, any kind of way. It was all in good fun and my joy is true. I am no sellout. You can buy these same motors on Amazon, Walmart and anywhere els. Im sure you’ve never shopped on Amazon, or Walmart or eBay tho. If Honda,Merc, Suzuki, or Yamaha sold a $280 motor bet your bum I’d be testing those for fun to. Have a good one brother.
@@TightlineTV I don’t buy motors …. I take wasted motors that’s cheaper to replace in when I rig a repower wait till I get another for parts then use parts from 2 to make 1 … my little boat I use for fishing is 10 feet long with a Mercury 25 horse I rebuilt and tweeked for speed after my test ride I named my little boat suck my wake why I can outrun jet skis and overturn kayaks and paddle boarders for fun and laughs blowing by them
@@GeorgiaRidgerunner I’m not harassing anyone I’m leaving the boat harbor racing to the breakwater to go to open sea … as far as my truck and tires everyone in the harbor knows I’m the only locally owned outboard repair shop and dealership one and two I cut my customers a lot of breaks when I can so you think my tires would be slashed as far as my own safety I joined the USMC and did that before returning home
Uh...China has built engines and components for Honda for decades.