Very informative video 😍 and great content. I bought a Cricut for my wife for the very same reason you mentioned, which is such an amazing coincidence 😍 All the best can't wait for more amazing vids 🙏
I also thought I could skip laser cutting, haha! Thanks for the tip to get more intricate cuts. I'm hoping to make inch scale dollhouses so based on this video I think a good strategy will be to cut chipboard walls and floors, then wood slats for flooring, paneling, molding, and siding.
@@ItsyBitsyBuild I would also like to ask if you have ever cut balsa wood with the Deep Cut Blade. If so, how did it go? Since it can cut harder material, did it work as well or better/worse? Thank you!!
@@eddaviii9154 I haven't personally but I'd imagine the wood would need to be thinner than 1mm due to the length of the deep point blade compared to the knife blade.
So helpful - thanks heaps!!!! 😊 I'm contemplating a Cricut to make miniature furniture - you've helped me immensely. I don't have the budget for a laser cutter. So many great tips too - you've inspired me.
Aww I'm so glad! Be sure to check out my mini tutorials, I also recently uploaded my miniature projects on Cricut community, search for Itsy Bitsy Build.
@@sherylcross5297 in cricut design space when you first log on it shows a search bar, select the filter that says cricut community and type in Itsy Bitsy Build.
This is what I want to do with my Silhouette Cameo 4. I realized it has limits. But I am not flush with cash so it helps to have someone do the research. Thank you!
@@uwsupergirl I'm sorry to hear this. It would help to know a bit more so I can assist. What material are you trying to cut out, what material setting have you used in design space and what accessory are you using?
Hi, I just came across this video which you posted a year ago on Wood Cutting & Knife Blade. I have a couple questions I hope you may be able help me with. My first questions is which Cricut is better? The Cricut Maker or Cricut Maker 3. Second question how thick of Polystyrene Sheets sheets can a Cricut Maker cut?? Thank you for posting this most informative video. Awaiting your response. 🙂
Hi Sal, you might want to take a look at my Cricut Maker vs. Maker 3 comparison video available here th-cam.com/video/utUw69Bw-zg/w-d-xo.html The maximum thickness the Cricut can cut is 2.4mm thick. If these sheets are straight polystyrene without any additional structure, like the ones you get in shipping boxes, its likely to break when you attempt to remove it from the mat and the small polystyrene balls it produces when cut may get caught in the machine. If you're referring to something like foam board which has some structure to it then this should be fine provided the plastic isn't too dense. I've never personally cut either so it would be a bit of trial and error. I hope this helps :)
Hey there fellow Aussie, it has been a really long time since I bought them but I think I got some from Amazon and others from craft online. I also tend to pick the cardboard backing off the kmart cardstock and use that as well. Hope that helps, thanks for supporting my work ☺
Hi. Thanks for taking the time to help us newbies out. As a fellow Aussie, I was wondering where you purchase the Cricut basswood from, now that the USPS isn’t shipping to Australia? Is there a UK site? Thanks
Hey Helen, I purchased this one from amazon www.amazon.com.au/Cricut-2006255-6X12-Basswood-Natural/dp/B07P1DZPNB/ref=mp_s_a_1_3?crid=3MC7HAR093HUG&keywords=cricut+basswood&qid=1640723559&sprefix=Cricut+bassw%2Caps%2C288&sr=8-3
Use chipboard then glue on veneer just like IKEA! And then you can skip painting. Cricut has some lovely veneers. For fancy things I think this would probably work and look very nice.
Hi I also purchased the Cricut to make wooden dollhouse miniatures and I purchased the cricut basswood and it would not cut all the way through. I did many passes and it didn't matter. How did you get it to cut through?
@@sherylcross5297 you can check out my miniature tutorials on my TH-cam channel or a lot of sellers have svg files on etsy. Search for the words "miniature svg".
My Cricut Maker won’t even cut 1/32 inch balsa wood with my knife blade. I have been troubleshooting for days to no avail. I’ve calibrated, changed the blade just in case the first one was faulty, moved the star wheels, I’ve done over 20 passes, etc. I have no idea what I’m doing wrong! Any idea or tips by chance?! I love your videos and tips! 😄
@@somebodyelse9323 I'm sorry to hear this. Where did you buy this balsa wood from? I find most balsa wood is pretty soft and should be snappable with your fingers so your Maker shouldn't have any issues cutting through. There have been some firmware issues with wood cutting but this was isolated to the Maker 3.
![[Live] : ONE FIGHT NIGHT 25 วันนี้!! "อเล็กซิส vs รีเกียน"](http://i.ytimg.com/vi/suVr9a6BM2g/mqdefault.jpg)
I love hearing about all the projects you're making with your Cricut. Leave me a comment below to share :)
Hi. Does this machine cut obeche wood?
@@juliebishop44 no only balsa and basswood that's less than 2.4mm thick. Both are pretty soft woods.
Ok. Thank you 😊
Think she meant 0.09449" = 3/32" which is equivalent to 2.4mm
I did the math and thought that almost an inch seemed way too big!! Thank you for the clarification!!!
Very informative video 😍 and great content.
I bought a Cricut for my wife for the very same reason you mentioned, which is such an amazing coincidence 😍
All the best can't wait for more amazing vids 🙏
I also thought I could skip laser cutting, haha! Thanks for the tip to get more intricate cuts. I'm hoping to make inch scale dollhouses so based on this video I think a good strategy will be to cut chipboard walls and floors, then wood slats for flooring, paneling, molding, and siding.
That sounds like a great plan. You could also try with something like kraft board.
@@ItsyBitsyBuild thanks for the tip!
Thank you for this. This is exactly what I was after in wanting to buy a cricut for my miniatures too! And love in mm not inches haha.
Aww I'm so glad. I have a few mini tutorials on my channel you might like too ☺
@@ItsyBitsyBuild will check it out! I am newish but love fellow Australian arts and crafters TH-camrs so will support for sure 😀
This was really helpful! Thank you for making this video!
You're welcome! Thanks for the support!
@@ItsyBitsyBuild I would also like to ask if you have ever cut balsa wood with the Deep Cut Blade. If so, how did it go? Since it can cut harder material, did it work as well or better/worse? Thank you!!
@@eddaviii9154 I haven't personally but I'd imagine the wood would need to be thinner than 1mm due to the length of the deep point blade compared to the knife blade.
@@ItsyBitsyBuild Thank you so much! Your info is really useful!!
So helpful - thanks heaps!!!! 😊 I'm contemplating a Cricut to make miniature furniture - you've helped me immensely. I don't have the budget for a laser cutter. So many great tips too - you've inspired me.
Aww I'm so glad! Be sure to check out my mini tutorials, I also recently uploaded my miniature projects on Cricut community, search for Itsy Bitsy Build.
@@ItsyBitsyBuild where do I find Cricut community?
@@sherylcross5297 in cricut design space when you first log on it shows a search bar, select the filter that says cricut community and type in Itsy Bitsy Build.
Thank you; superb videos, all. 💘
I really appreciate the support 😊
This is what I want to do with my Silhouette Cameo 4. I realized it has limits. But I am not flush with cash so it helps to have someone do the research. Thank you!
You're welcome ☺
How do you find the cameo?
@@ItsyBitsyBuild I'm struggling a bit. I had the silhouette and it was simpler. I have had some issues trying to cut anything thicker than cardstock.
@@uwsupergirl I'm sorry to hear this. It would help to know a bit more so I can assist. What material are you trying to cut out, what material setting have you used in design space and what accessory are you using?
very informative thank you
You're welcome ☺
@@ItsyBitsyBuild would never have thought of laminate for windows. Yay
Brilliant thankyou so much :)
Thanks for always leaving such lovely comments, Kerry. It brings me so much joy to read them 😊
@@ItsyBitsyBuild I really love how you explain everything very clearly :)
Hi, I just came across this video which you posted a year ago on Wood Cutting & Knife Blade. I have a couple questions I hope you may be able help me with. My first questions is which Cricut is better? The Cricut Maker or Cricut Maker 3. Second question how thick of Polystyrene Sheets sheets can a Cricut Maker cut?? Thank you for posting this most informative video. Awaiting your response. 🙂
Hi Sal, you might want to take a look at my Cricut Maker vs. Maker 3 comparison video available here
th-cam.com/video/utUw69Bw-zg/w-d-xo.html
The maximum thickness the Cricut can cut is 2.4mm thick. If these sheets are straight polystyrene without any additional structure, like the ones you get in shipping boxes, its likely to break when you attempt to remove it from the mat and the small polystyrene balls it produces when cut may get caught in the machine. If you're referring to something like foam board which has some structure to it then this should be fine provided the plastic isn't too dense. I've never personally cut either so it would be a bit of trial and error.
I hope this helps :)
I watch your video because I have niece and nephew
Thanks for the support 😊
Where do you purchase the contact sheet for the detail cuts? I’ve never used it, so I’m not familiar with what to look for exactly.
You can use whatever clear contact or vinyl you like.
Hey as a fellow Aussie here. Just wanting to know where you bought the chipboard from?
Hey there fellow Aussie, it has been a really long time since I bought them but I think I got some from Amazon and others from craft online. I also tend to pick the cardboard backing off the kmart cardstock and use that as well.
Hope that helps, thanks for supporting my work ☺
Hi. Thanks for taking the time to help us newbies out. As a fellow Aussie, I was wondering where you purchase the Cricut basswood from, now that the USPS isn’t shipping to Australia? Is there a UK site? Thanks
Hey Helen, I purchased this one from amazon www.amazon.com.au/Cricut-2006255-6X12-Basswood-Natural/dp/B07P1DZPNB/ref=mp_s_a_1_3?crid=3MC7HAR093HUG&keywords=cricut+basswood&qid=1640723559&sprefix=Cricut+bassw%2Caps%2C288&sr=8-3
Use chipboard then glue on veneer just like IKEA! And then you can skip painting. Cricut has some lovely veneers. For fancy things I think this would probably work and look very nice.
That's a great idea ☺
what contact film did you use?
You can use any clear contact or vinyl. It's more about keeping the shape intact while it cuts.
I have the Cricut maker 3, do I need a Cricut maker 3 cutting blade or just the maker blade?
All the tools on the Maker work with the Maker 3 ☺
Hi I also purchased the Cricut to make wooden dollhouse miniatures and I purchased the cricut basswood and it would not cut all the way through. I did many passes and it didn't matter. How did you get it to cut through?
There were some firmware issues with cutting wood on the Maker 3. Is this the machine type you have?
Can I ask where you find templates?
Hi Sheryl, what kind of templates are you after specifically?
1:24 furniture
@@sherylcross5297 you can check out my miniature tutorials on my TH-cam channel or a lot of sellers have svg files on etsy. Search for the words "miniature svg".
@@ItsyBitsyBuild ok thanks - I’m thinking of getting the maker 2 and it’s soooo expensive - just want to make sure it does what I need !!!
Thicketworks have a great tutorial for hardening chipboard and making it feel like wood
m.th-cam.com/video/6wyCOHzbav0/w-d-xo.html
I have 2mm balsa wood and cant seem to cut deep enough on my maker where am I going wrong please
Hey Kay, where did you buy the balsa wood?
My Cricut Maker won’t even cut 1/32 inch balsa wood with my knife blade. I have been troubleshooting for days to no avail. I’ve calibrated, changed the blade just in case the first one was faulty, moved the star wheels, I’ve done over 20 passes, etc. I have no idea what I’m doing wrong! Any idea or tips by chance?! I love your videos and tips! 😄
@@somebodyelse9323 I'm sorry to hear this. Where did you buy this balsa wood from? I find most balsa wood is pretty soft and should be snappable with your fingers so your Maker shouldn't have any issues cutting through. There have been some firmware issues with wood cutting but this was isolated to the Maker 3.
Same !!! I used the cricut brand wood and had to trick the machine into thinking it was chipboard in don't understand why is not cutting 🤔 😒 😕
Can you use a laptop?
To cut with the knife blade? Yes absolutely. Just not a chromebook.