Such a pity that motherboard makers stopped putting proper manual into box. It was much easier to check all the stuff I needed in the book, than read online manual.
haha yes I agree, I preferred to have all the info with quick access, but well board guys are going Green these few years. I had to do a guess and check when I get this board without a manual.
@@RealMelTanthe black version is just the pro. Gigabyte motherboards that are white are always called ICE and always have a non ice version. The master is their top end board, next step up from the pro.
@@prototypep4 I see. Thank you for the explanation. I am not very familiar with the Gigabyte line up, this is good info. I saw there's a Aorus Extreme AI top now?
I had issues with am5 motherboards from all brands, until I got a gigabyte x670e aorus master... Then I got the white x670e pro X, no issues... If the if zen5 x3d is good I will pick this white x870e for my new build
I like the Aorus Pro Ice white aesthetic but mobos like the Asus X870E-E and the MSI Carbon have 13 USB ports (all USB 3.2 Gen2). The sweet spot for a X870E board for me is a pure white aesthetic with 11+ USB ports (3.2 Gen1 or higher), 2x PCIE slots and 4x M.2 slots (2x Gen 5 and 2x Gen 4). Balance it out with no bandwidth sharing and space out the M.2 slots to accommodate third party heatsinks. If a manufacturer can do that, it will be a great board. Unfortunately current boards share too much bandwidth and not enough white options.
Thanks for the review. Do you know if you can use 2 M.2 slots without slowing down the GPU? I read the manual and it says bandwidth is only shared with PCIEX16 if you use the M2B_CPU and M2C_CPU connectors. However, if you use M2A_CPU and M2D_SB, it is presumably fine and won't affect the GPU from what I understand
Yes you are right. I mentioned that in the video. The best slots are the top 2 M.2 and PCie. I do not know how to not limit the speeds if you are to use the bottom gen 5 M.2 slots. I think it is wired this way and there is no way to change that.
@@aarontran3826yes using multiple of the m2 slots or using multiple GPUs is not recommended for this board , if you want to do that go for the msi x870
@@aarontran3826 you can use M2A_CPU and M2D_SB without impacting the amount of lanes the PCIEx16 slot gets - that's the M.2 slot above the PCIE slot and the middle M.2 slot in the 3 below it.
There is a cableless one that has the connectors at the back, but they share the same name, which is strange. Gigabyte X870E AORUS PRO ICE ( back connector Ver) will be in my next build.
Hello I m new and I have the X870E pro ice. I don’t understand why putting 2 SSD in the 5.0 slot slow down the PCIE and why putting 1 in the 4.0 and the other in the 5.0
Hello. Do you have any information on the maximum width spacing on the M2 slots? For example, the MSI X870E Carbon's manual provide the maximum width for each slot for users intending to use third party heatsinks. The Aorus Pro's manual does not provide the same info. I'm considering using the Graugear G-M2HS06 (25.5mm width) or the IDCooling Zero M15 (23mm). Thanks!
Sorry I do not. I am also not sure if the brand's tech guy has info to this hahah Thats good idea though, may be I can measure board gap lengths for next videos :)
Going to turn on my pc for the first time tomorrow. would it be ok to update the bios right away to the newest version and the install windows after? TIA!
Is there a way to go into the BIOS and just make those 2 extra PCI-E 5.0 X4 M2 slots downgraded to PCI-E 4.0 4X or something? Because I will need to use one of them (I have 3 NVME). But it will be a PCI gen 4 NVME. All that said a GPU at PCI-E 5.0 X8 is the same as a a PCI-E 4.0 X16 in bandwidth. So not really losing anything.
Yes I think you can change the gen setting in the BIOS. You have to search for the PCIe page and there should be a way to drop the lanes from gen 5 to gen 4.
You managed to get the noise detector working with the provided cable? I can’t see them over in bios or hwinfo64 unlike the Intel version of z790 which is working
Great video. Does this motherboard have elck control (asychrous clock)? I waiting for mine to come in the mail, but I cant find any information online. Thanks!
The number of PCIE lanes is different. The pro also has an extra pcie slot. There's a few other IO diferences too. Like gigabyte adding the internal hdmi port for a hardware monitor inside the system.
@@BluD i just ordered one for my build. Waiting to see performance numbers for the 9950x3D chip though. My build is a combo gaming and 3D workstation so yeah. Hoping they've implemented something to help core parking on zen5
@@prototypep4 That will be cool. Although I won't be able on help you on that. I am very sure AMD won''t pass me a 9950X3d to test. This is a super rare pokemon CPU when it comes out.
About the bandwidth sharing, if i use a gen 5 ssd on the main gen 5 ssd slot and two gen 4 ssds on the second and third ssd slot , will it still share bandwidth?
Based on the manual, i think yes theoretically it will. Have to do testing. Because the board is wired this way, if you populate the slot. It should pick it up as that.
Except it's incorrect to say "No DisplayPorts because of USB 4". It's misleading. YOU CAN have a DisplayPort, but you have to put it in the USB 4 slot. They both use the same port. So if anyone's wondering if they can plug a DisplayPort into this motherboard, yes you can. Use USB 4.0. Also, I just realized I typed this on my girlfriend's account. She's not the IT person so don't ask her for IT info lolol.
hi,my man i have a problem with this board...i use a 9800x3d,32 gb ram ddr5 fury beast expo certified.Put the 2 ram sticks in the correct slots for dual ofc BUT when i restart my pc the ram in the slot A2 wont get recognized(after every restart).When i turn off my pc and turn it on again it works perfect,it only occurs on restarts.(swap the ram so its not from the ram stick). I connected the CPU in only one 8pin(the one to the right,wanted to say that cuz this mainboard has two...12v_2x4_2 and 12v_2x4_1..mine is connected in the 12v_2x4_1) What do you think the problem is?? do i need to connect the CPU in the other slot the one with 12v_2x4_2 ? Or what could be the problem ? Pc works fine...no crash....gaming like crazy.But on every restart this happens. Thanks in advance and new sub here cuz your content is very nice:D
@RealMelTan changed the ram... tried another motherboard...and after some more testing o found that the problem is the GCC software from Gigabyte... uninstalled the GCC and works flawless.
Great video, thank you for reviewing this motherboard! Can you or someone recommend me a Motherboard that doesnt slow down pci-e 16x slot using an nvme gen 5 ssd?
Thank you Flex for liking this video! This board's top PCIe slot does not reduce slot if you use it together with the top M.2 slot. But if you want to use the bottom gen 5 slots, there would be a compromise. Or you can check out the ASUS X870E-E which i reviewed too :)
yeah, useful for those who do not have the option (or knowledge) to install ethernet access points to various rooms. obviously more limitations if they are renting.
Hi, I'm rather new to the whole PC building thing and tryna build my first PC so i saw similar comments to yours,, could you please explain your point and the difference?
@@20zX-games Oh hey, I am not an expert at this. But let me try. According to the manual, if you are to install the an SSD in the bottom 2 gen 5 slots, your GPU will lose half its bandwidth. So your graphics card will not be able to run at the full potential, if you are use to all the M.2 slots.
@@RealMelTan but what if i use the pcie 5.0 x16 and leave the other 2 slots that share bandwidth empty then install a ssd card in the slot right behind the pcie 5.0 which is the pcie 4.0 x4 M.2 ? This one doesn't share bandwidth according the manual if i understood correctly so in this case the gpu should operate at x16 ?
@@RealMelTan you made a great video man! another question about the m.2 slots if i were to populate the top one above the gpu slot with a 5.0 m.2 then use a 4.0 m.2 in the middle lane would it still take from the gpu?
It’s a shame they kinda of ruined this nice looking board with the lane sharing with the GPU if you use more than one SSD. Would have bought this one but have 3 SSDs
Such a pity that motherboard makers stopped putting proper manual into box. It was much easier to check all the stuff I needed in the book, than read online manual.
haha yes I agree, I preferred to have all the info with quick access, but well board guys are going Green these few years. I had to do a guess and check when I get this board without a manual.
This overview is genuinely underrated, you did a really good job explaining about the mobo, looking to buy the black version of this motherboard
HAHA thank you much! This really means a lot to me. Was it too lenghty or too dry?
Black = AORUS master?
No, I think I'm gonna go for the X670E AORUS PRO
@@RealMelTanthe black version is just the pro. Gigabyte motherboards that are white are always called ICE and always have a non ice version. The master is their top end board, next step up from the pro.
@@prototypep4 I see. Thank you for the explanation. I am not very familiar with the Gigabyte line up, this is good info. I saw there's a Aorus Extreme AI top now?
Completely agree. Short and precise review about every thing you could ask for from a mobo
I had issues with am5 motherboards from all brands, until I got a gigabyte x670e aorus master... Then I got the white x670e pro X, no issues... If the if zen5 x3d is good I will pick this white x870e for my new build
The 9800x3d is definitely king now. I am trying to get it to work well on this board. Will update you in later videos ;)
@@RealMelTan I am waiting fot the 16 cores, hopefully will have 3d cashe in boths ccds
@@RealMelTan did you manage to make it work? what issues are you facing?
Does 7800x3d work fine with this aourus? @@RealMelTan
2 pump connectors, some people do 1 water loop for cpu, and a seperate water loop for gpu, so youd have 2 seperate pumps/loops.
Good news to buyers, the Wi-Fi antenna is magnetic. :) i bought it and am quite happy with the color scheme and the amount of usb ports. :)
Great stuff! Thank you for the update ! It is a cool antennae, not gonna lie.
I like the Aorus Pro Ice white aesthetic but mobos like the Asus X870E-E and the MSI Carbon have 13 USB ports (all USB 3.2 Gen2). The sweet spot for a X870E board for me is a pure white aesthetic with 11+ USB ports (3.2 Gen1 or higher), 2x PCIE slots and 4x M.2 slots (2x Gen 5 and 2x Gen 4). Balance it out with no bandwidth sharing and space out the M.2 slots to accommodate third party heatsinks. If a manufacturer can do that, it will be a great board. Unfortunately current boards share too much bandwidth and not enough white options.
Thanks for the review. Do you know if you can use 2 M.2 slots without slowing down the GPU? I read the manual and it says bandwidth is only shared with PCIEX16 if you use the M2B_CPU and M2C_CPU connectors. However, if you use M2A_CPU and M2D_SB, it is presumably fine and won't affect the GPU from what I understand
Yes you are right. I mentioned that in the video. The best slots are the top 2 M.2 and PCie. I do not know how to not limit the speeds if you are to use the bottom gen 5 M.2 slots. I think it is wired this way and there is no way to change that.
@@RealMelTan Hello, does that you cannot populate all of the M.2 Slots? WIll it slow down GPU performance if I do?
That sounds disappointing if I'm going to lose Gen5 speeds if I also throw some Gen4 8tb's on it
@@aarontran3826yes using multiple of the m2 slots or using multiple GPUs is not recommended for this board , if you want to do that go for the msi x870
@@aarontran3826 you can use M2A_CPU and M2D_SB without impacting the amount of lanes the PCIEx16 slot gets - that's the M.2 slot above the PCIE slot and the middle M.2 slot in the 3 below it.
thanks for showing the bios . neat from gigabyte
Thank you for watching this video till this part and to the end. Do u like the new BIOS?
There is a cableless one that has the connectors at the back, but they share the same name, which is strange.
Gigabyte X870E AORUS PRO ICE ( back connector Ver) will be in my next build.
Oh yes, I think i saw this at Computex. I hope Gigabyte can send me one to review haha
Question, cus I might buy this mobo. In the other gen 5 nvme slots, if I put gen 4 ssds, will my gpu still be running at X8?
Same question from me
I have the same question.. 🤔
Good question! I have to get this a try. But i guess is yes. This is a good experiment.
The answer is yes, I have the board and 9800x installed. Doesn't matter what you put in there. GPU goes to 8x
This applies to almost, if not all of the current Gen motherboards. Simply not enough lanes
Hello I m new and I have the X870E pro ice. I don’t understand why putting 2 SSD in the 5.0 slot slow down the PCIE and why putting 1 in the 4.0 and the other in the 5.0
I have this mobo in all white setup… beautiful
Cool! Do you have pictures?
Hello. Do you have any information on the maximum width spacing on the M2 slots? For example, the MSI X870E Carbon's manual provide the maximum width for each slot for users intending to use third party heatsinks. The Aorus Pro's manual does not provide the same info. I'm considering using the Graugear G-M2HS06 (25.5mm width) or the IDCooling Zero M15 (23mm). Thanks!
Sorry I do not. I am also not sure if the brand's tech guy has info to this hahah
Thats good idea though, may be I can measure board gap lengths for next videos :)
Question, since the lane sharing, where would you insert the second M2?
the 3rd slot down or middle of the 3 under the same heatsink
Amazing video, wish you could respond and help answer more peoples questions though
Yes I will try to respond when I can, working on other videos at the same time.
One man show hahah
But thank you for supporting! Do watch the newest video I put up too, let me know what you think.
@@RealMelTan Sure! I just was giving constructive criticism and I also don't think its possible to answer them all.
Can you use the hdmi port on the side or a screen if you have a dedicated graphics card?
Yes you can, they are separate ports. You use the DP on your GPU for your main monitor, and the special HDMI for a smaller screen.
@ do you have a video on this??
Going to turn on my pc for the first time tomorrow. would it be ok to update the bios right away to the newest version and the install windows after? TIA!
Yup it will be. Esp if you are using the 9800X3D, you want to get the new BIOS to make use of Turbo mode ;)
wait so if I put a GPU in and a PCI 5 M.2 into the M2.A_CPU slot they will both work at full speed and the 16x GPU slot will not be cut to 8X?
So dumb I know smh
Yup i think you are right. The top 2 PCIe n M.2 are not affected (from the CPU). The bottom gen 5 slots are different and will be affected.
How dou you access to the Cmos battery?
Screw the backplate off and remove the heatsink
I read that gigabyte bios often is laggy when moving mouse´around, how was your experience with this board?
It was fine to me, was much better after I've updated to the latest BIOS. But I find the white background a bit too distracting haha
@@RealMelTan okay
Is there a way to go into the BIOS and just make those 2 extra PCI-E 5.0 X4 M2 slots downgraded to PCI-E 4.0 4X or something? Because I will need to use one of them (I have 3 NVME). But it will be a PCI gen 4 NVME.
All that said a GPU at PCI-E 5.0 X8 is the same as a a PCI-E 4.0 X16 in bandwidth. So not really losing anything.
Yes I think you can change the gen setting in the BIOS. You have to search for the PCIe page and there should be a way to drop the lanes from gen 5 to gen 4.
did you find out how to drop the lanes from gen5 to gen4?
You managed to get the noise detector working with the provided cable? I can’t see them over in bios or hwinfo64 unlike the Intel version of z790 which is working
I did not try it though. Let me see how it works.
@ sure do let us know if it works
Great video. Does this motherboard have elck control (asychrous clock)? I waiting for mine to come in the mail, but I cant find any information online. Thanks!
Thanks for the support man!
Hmm I have to ask Gigabyte about this. I am not sure about it either.
Kinda in the middle of this one and the 870A strix white board. Trying to figure out the differences.
I see, what do you prioritise for board? besides the white
The number of PCIE lanes is different. The pro also has an extra pcie slot. There's a few other IO diferences too. Like gigabyte adding the internal hdmi port for a hardware monitor inside the system.
@@prototypep4 yeah i do think thats the way im also currently leaning at the moment.
@@BluD i just ordered one for my build. Waiting to see performance numbers for the 9950x3D chip though. My build is a combo gaming and 3D workstation so yeah. Hoping they've implemented something to help core parking on zen5
@@prototypep4 That will be cool. Although I won't be able on help you on that. I am very sure AMD won''t pass me a 9950X3d to test. This is a super rare pokemon CPU when it comes out.
About the bandwidth sharing, if i use a gen 5 ssd on the main gen 5 ssd slot and two gen 4 ssds on the second and third ssd slot , will it still share bandwidth?
Yes
@enzodelgiudice5456 aw man, are you sure??
Is there a way to install only one ssd card and have the gpu operate at x16 ?@@enzodelgiudice5456
Based on the manual, i think yes theoretically it will. Have to do testing.
Because the board is wired this way, if you populate the slot. It should pick it up as that.
What’s the do between this and the elite wifi ice???
I have to do some research on this. They look similar in terms of specs.
How did your get your MOBO RGB working mine is not turning on
Hmm, did you put in a CPU onto the board before powering it on? I saw mine turn on with a CPU.
@ ah nvm I thinks it’s only the pro version I have the just x870e the non pro
Hi so if you install on gen 4 on the.middle it wont affect the performance of gpu? It will remain x16?
Correct - the slot above the GPU (M2A_CPU) and the middle slot in the 3 below it (M2D_SB) are on different lanes
thank you for replying ! @wthefourth
Except it's incorrect to say "No DisplayPorts because of USB 4". It's misleading. YOU CAN have a DisplayPort, but you have to put it in the USB 4 slot. They both use the same port. So if anyone's wondering if they can plug a DisplayPort into this motherboard, yes you can. Use USB 4.0.
Also, I just realized I typed this on my girlfriend's account. She's not the IT person so don't ask her for IT info lolol.
@@jessiesue1589 good point, i will make it clearer. U will need a usb to dp cable to use dp on this motherboard
Thank you 🎉
Thank you! What did you like about the board n review?
Can u change the rgb sutf
I think you can, let me try it and get back to you. It should be doable ?
hi,my man i have a problem with this board...i use a 9800x3d,32 gb ram ddr5 fury beast expo certified.Put the 2 ram sticks in the correct slots for dual ofc BUT when i restart my pc the ram in the slot A2 wont get recognized(after every restart).When i turn off my pc and turn it on again it works perfect,it only occurs on restarts.(swap the ram so its not from the ram stick).
I connected the CPU in only one 8pin(the one to the right,wanted to say that cuz this mainboard has two...12v_2x4_2 and 12v_2x4_1..mine is connected in the 12v_2x4_1)
What do you think the problem is?? do i need to connect the CPU in the other slot the one with 12v_2x4_2 ? Or what could be the problem ?
Pc works fine...no crash....gaming like crazy.But on every restart this happens.
Thanks in advance and new sub here cuz your content is very nice:D
RMA it
Have you checked your RAM sticks? I dont think it is the problem with using 1 or 2 CPU power. Or perhaps have you updated to the latest BIOS?
@RealMelTan changed the ram... tried another motherboard...and after some more testing o found that the problem is the GCC software from Gigabyte... uninstalled the GCC and works flawless.
Great video, thank you for reviewing this motherboard! Can you or someone recommend me a Motherboard that doesnt slow down pci-e 16x slot using an nvme gen 5 ssd?
Thank you Flex for liking this video! This board's top PCIe slot does not reduce slot if you use it together with the top M.2 slot.
But if you want to use the bottom gen 5 slots, there would be a compromise. Or you can check out the ASUS X870E-E which i reviewed too :)
LOL at 1:37 isnt that Board an Asus ?
How much does it weigh in kgs?
About 2 plus kg?
Is the rgb a rainbow color by default
haha yes it is. Rainbow as you turn it on.
Guys, do you even use WIFI antena?
yeah, useful for those who do not have the option (or knowledge) to install ethernet access points to various rooms. obviously more limitations if they are renting.
*raises hand* I have two pumps. Big-ass external radiator.
HAHAHA nice. So you are one of them who needs 2 pump headers :)
Mobos with shared lanes are an instant turn off for me. Shame, it's such a good looking board.
Hi, I'm rather new to the whole PC building thing and tryna build my first PC so i saw similar comments to yours,, could you please explain your point and the difference?
Yes I was surprised too. But I guess this is the drawback of having so many gen 5 slots. It was like when gen 4 was in its earlier stages.
@@20zX-games Oh hey, I am not an expert at this. But let me try. According to the manual, if you are to install the an SSD in the bottom 2 gen 5 slots, your GPU will lose half its bandwidth. So your graphics card will not be able to run at the full potential, if you are use to all the M.2 slots.
@@RealMelTan but what if i use the pcie 5.0 x16 and leave the other 2 slots that share bandwidth empty then install a ssd card in the slot right behind the pcie 5.0 which is the pcie 4.0 x4 M.2 ? This one doesn't share bandwidth according the manual if i understood correctly so in this case the gpu should operate at x16 ?
@@RealMelTan you made a great video man! another question about the m.2 slots if i were to populate the top one above the gpu slot with a 5.0 m.2 then use a 4.0 m.2 in the middle lane would it still take from the gpu?
It’s a shame they kinda of ruined this nice looking board with the lane sharing with the GPU if you use more than one SSD. Would have bought this one but have 3 SSDs
Oh you do plan to use 3 gen 5 SSDs?