I'm facing retirement inside 5 years and this would be a great fit for me since I'm a mech engineer and used CAD/CAM/FEA back in the late '80's early '90's. The biggest barrier for me is the price of a legal license for AutoCAD, it's a no-go for me but something I REALLY want.
I know this comment is old but I'm 27 going back to trade school to finish my certification course for Technical drawing with Autocad. If you can get into registration and a semester of school under your belt, your professor should be able to give you a student code to redeem on auto desk to let you get a student trial version of Autocad. That's what I did back in 2018 when my dumbass wasn't taking college as seriously as I should have
A note about the comment above: The education license for AutoCAD will have watermarks in the drawings you produce. I assume most professional companies don't accept those. It's a great option for learning and upgrading your skills/knowledge, though.
@@mhawang8204I was not aware of this. I don't sail the seas outside of shows and movies so I had no idea what the recent student edition was like, thank you for informing me
I've been using CAD since '82, so I hear ya :-))) Forget that greedy CAD-monster!! Instead, try...ACTCAD !! Seriously, perfectly-capable of ALL .dwg planwork!! zillions of $$$$-less for full-ownership. your welcome!
I find rhinoceros 3d is the best program for me. I do a lot of vehicle parts and weapon design, along with eyewear like stylish sunglasses and what not, I’ve been doing this for fun on the side for about 15 years now using the same program, any advice how I could sell my skills?
I want to work as a freelancer but i don't have fully featured CAD SOFTWARE , I have CREO PTC of Student version, How to start work with Student version, there are so many restrictions in student version and I can't invest this much amount at this time so what should i do ? Currently I'm work as a Design Trainee but i also start freelance.
Can you answer me, as I am fresher mechanical draughtsman but solid works is really useful for my job.In piping draughtsman, solid works is really important? Sir please answer me as soon as possible.
Hi this is Sagar I currently working in PEB industry as a detailer andalso work in autocad and takla and I want to work as a freelance if you have any project
I am an astronautical engineer. I had an interview and got a case study on catia. I partially finished it. Now I saw the light at myself and I am planning to work on some CAD software. I heard that fusion 360 is very user friendly and a little bit tried it. Now I am between working on CATIA and get a regular job on with it and working on fusion 360 and being a freelancer. I am confused.
In the beginning of your career, getting a job is the real deal and it will give you the much-needed industry experience, which you can later use in yoru freelance career.
Hi sir, my concern is that AutoCAD is paid and it is nearly 1 lakh INR for its subscription. Is there any other ways to get it for lower prices ? Waiting for your reply...
There is no course for freelancing, you just need to make your current designs dn drafting skills better and then start with freelancing projects on websites mentioned in the video.
@@Stan-Ard This isn't a course in freelancing it's just tips and things I have learned that I am sharing here for free. Also, I have shared some tips from other successful freelancers that will essentially make the work hopefully easier for anyone who is considering a freelancing career. And yes, I am not selling any course about freelancing; the information is all free here.
@@sourcecad no I know my friend, I'm joking.. a course in freelancimg, our friend at the top seems to think there is a course in everything in life.. (a course in walking, a course in turning lights on , a course in using ur eyes 👀) 😂😂 what he fails to understand is freelancimg involves having a personality and networking with humans.. your can't learn that in a book .. 😂 I was taking the p*SS 😂 love ur channel bud 💯👌👌👌
"Hello, my name is Aman Sen. I am a Design Engineer with extensive experience in both design and development. I have worked on both field and desk-based projects, specializing in Automotive and Fabrication(Static equipment)design. My skill set includes modeling, drafting, and proficiency in P&ID and layout. I have a strong portfolio showcasing the successful completion of numerous projects over the past five years. If you have any suitable opportunities, please don't hesitate to contact me.
I recently heard about Resubot and how it can help create ATS-friendly resumes. Might be useful for those looking to apply for jobs in CAD.
*Thanks for the Mention* _Its was great taking to you and sharing insights on Freelancing for Mechanical engineers._
Welcome Prashant and thanks for sharing the insights.
You have helped me feel so excited about starting a new career in design. Thank you so much, you are a saint!
Thank you bro for sharing your experience on the freelancing platforms. I will try to follow the steps whatever you explained.
This video breaks down the steps so clearly. I wish I had this information when I was starting out.
The tips on delivering value to clients are gold. It's all about building long-term relationships.
Great insights on building a freelancing brand in the CAD industry. I found the section on creating a portfolio particularly helpful.
I started a cad tutorial TH-cam channel and I’m glad I chanced on this channel. There are a lot to learn and apply from your channel
A fan of yours
I'm facing retirement inside 5 years and this would be a great fit for me since I'm a mech engineer and used CAD/CAM/FEA back in the late '80's early '90's. The biggest barrier for me is the price of a legal license for AutoCAD, it's a no-go for me but something I REALLY want.
............. Dingly dooo PIRATE bodly dingly BAY......... hodly podity podgity TOR...... Hipppity hippity seety why..... TOR..... Easy weeszy piddly do.
I know this comment is old but I'm 27 going back to trade school to finish my certification course for Technical drawing with Autocad. If you can get into registration and a semester of school under your belt, your professor should be able to give you a student code to redeem on auto desk to let you get a student trial version of Autocad. That's what I did back in 2018 when my dumbass wasn't taking college as seriously as I should have
A note about the comment above: The education license for AutoCAD will have watermarks in the drawings you produce. I assume most professional companies don't accept those. It's a great option for learning and upgrading your skills/knowledge, though.
@@mhawang8204I was not aware of this. I don't sail the seas outside of shows and movies so I had no idea what the recent student edition was like, thank you for informing me
I've been using CAD since '82, so I hear ya :-))) Forget that greedy CAD-monster!! Instead, try...ACTCAD !! Seriously, perfectly-capable of ALL .dwg planwork!! zillions of $$$$-less for full-ownership. your welcome!
THANK YOU FOR YOUR VALUABLE IMFORMATIOM TO ALL OF US KEEP DOING SIR BEST ADVICE ALL FOR SMALL MISTEKS WILL BE JUSTIFIED.........................
Thanks so much, this was comprehensive and to the point, I truly appreciate
Finishing up architecture looking to get into a freelancing
My best wishes!
I find rhinoceros 3d is the best program for me. I do a lot of vehicle parts and weapon design, along with eyewear like stylish sunglasses and what not, I’ve been doing this for fun on the side for about 15 years now using the same program, any advice how I could sell my skills?
Thank You Sir for your instructions
Welcome Haripriya
Thanks a lot for your excellent tips
very informative video Pandey jee
Good video. Please, I would like to learn AutoCAD Electrical. Kindly help or advice.
Great tips
Thank you
Sir i need guidance for
Electrical drafting
I done diploma in electrical
I want to work as a freelancer but i don't have fully featured CAD SOFTWARE , I have CREO PTC of Student version, How to start work with Student version, there are so many restrictions in student version and I can't invest this much amount at this time so what should i do ?
Currently I'm work as a Design Trainee but i also start freelance.
Can you answer me, as I am fresher mechanical draughtsman but solid works is really useful for my job.In piping draughtsman, solid works is really important? Sir please answer me as soon as possible.
not one mention of the King of CAD RHINO 3D
Frnds, suggest Coursera or Udemy course which includes Fasteners Selection, Surface Roughness, Welding Symbols, stackup analysis.
Is it ok if i use crack software for 3d Cad on fiverr or upwork ??
Sir i use to create revit family for 1.5 years for a BIM company, so please tell me how I can start freelancing ?
PLS WHICH SOFTWARE IS GOOD FOR DESIGNING 2D AND 3D CONTROL PANEL LAYOUTS
Thank you need. More videos like this ...
Welcome, more videos coming up.
Hi this is Sagar I currently working in PEB industry as a detailer andalso work in autocad and takla and I want to work as a freelance if you have any project
Thank you sir
in fiverr, they asking initial subscription price that we have to pay to get work
I'm first my time with freelancer. I don't know how I apply for CAD. Can you tutorial me with freelancer CAD? I am good skills w/ CAD
can you give me any source to learn ansys from scratch to professional ?
Hi, If you want to post your work on social media, Do you generally take explicit permission from the client?
I am an astronautical engineer. I had an interview and got a case study on catia. I partially finished it. Now I saw the light at myself and I am planning to work on some CAD software. I heard that fusion 360 is very user friendly and a little bit tried it. Now I am between working on CATIA and get a regular job on with it and working on fusion 360 and being a freelancer. I am confused.
In the beginning of your career, getting a job is the real deal and it will give you the much-needed industry experience, which you can later use in yoru freelance career.
سلام.چطور میتونم با اتوکد کار بگیرم؟
Where can we find these softwares for personal use?
Still need these? I’m a Retailer
For mechanical engineering, freelancing is very hard. Too much of so called pakisthani , bangaladesh engineers posting 5 Usd for one day of work.
What about electrical draftsman
Hi sir, my concern is that AutoCAD is paid and it is nearly 1 lakh INR for its subscription. Is there any other ways to get it for lower prices ? Waiting for your reply...
You can get it for free if you have a students license, or you have to install a pirated version
Sir what are the sites or how to apply autocad operator as freelancer?
Can u plz give us freelancing website link related to 3d 2d of tooling related
I want to be a 3D artist, do you think being a CAD engineer first is good?
Yes, it is. Depending on your country you might be very useful person
I need part time job in solidworks mould design
Whice course should i enroll for freelancing? (I am diploma in civil from Bangladesh, have been working as a draftsman last two years)
There is no course for freelancing, you just need to make your current designs dn drafting skills better and then start with freelancing projects on websites mentioned in the video.
@@sourcecad Thank you!
@@sourcecad😂😂😂 a course in freelancimg that is fkin brilliant.. I need a course in having a brain 🧠 can you provide any links 😂😂..
@@Stan-Ard This isn't a course in freelancing it's just tips and things I have learned that I am sharing here for free. Also, I have shared some tips from other successful freelancers that will essentially make the work hopefully easier for anyone who is considering a freelancing career. And yes, I am not selling any course about freelancing; the information is all free here.
@@sourcecad no I know my friend, I'm joking.. a course in freelancimg, our friend at the top seems to think there is a course in everything in life.. (a course in walking, a course in turning lights on , a course in using ur eyes 👀) 😂😂 what he fails to understand is freelancimg involves having a personality and networking with humans.. your can't learn that in a book .. 😂 I was taking the p*SS 😂 love ur channel bud 💯👌👌👌
Awesome
hi do you need a website
how to subscribes for train videos
Hello and thanks for the great video. What freelance platform/website do you suggest for FEM analysis?
super
I'm available for delegate
Hello
Is there any chance for freelance 2d working .
Yes certainly, you can get work like making house plans, converting PDF into DWG and more for 2D.
Where can I get such projects
How to find it freelance work?
Let me know about this process
Which laptop should be good for CAD softwares ? I am planning on buying hp zbook fury i7, 16gb ram, 512 storage, 4gb graphics card. Any suggestions?
Here, this might help th-cam.com/video/0aDeMRFSFXE/w-d-xo.html
If you have a jobs for Autodesk Inventor from 2D to 3D...you can to find me. Thanks
Sir can a college student apply for freelancer
There is no application required, all you need is skill set to do the work and if you can then you can start looking for projects.
@@sourcecad Thank you sir
Fix your camera first
hindi
first step ever: invest a gooood computer/laptop😂
CAD modelling will die soon because of A.I.
Then you should definitely check this video th-cam.com/video/4rRSgKzx2iE/w-d-xo.html
"Hello, my name is Aman Sen. I am a Design Engineer with extensive experience in both design and development. I have worked on both field and desk-based projects, specializing in Automotive and Fabrication(Static equipment)design. My skill set includes modeling, drafting, and proficiency in P&ID and layout. I have a strong portfolio showcasing the successful completion of numerous projects over the past five years. If you have any suitable opportunities, please don't hesitate to contact me.