NEW DOWNGRADE! Parkside Multitool PAMFW 20-Li C3.

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ม.ค. 2025

ความคิดเห็น • 53

  • @Vrabetzz
    @Vrabetzz 11 หลายเดือนก่อน +4

    B2 is made by OWIM, but it's not important anyway. Luckily I have the B2 Version.
    But I got the PWSAP 20 C3 angle grinder which vibrates like crazy with the included disc. Used it for 15-30 minutes and could feel it in my hands for hours afterwards. Were all tingly and I couldn't feel any light touches. After I complained to the manufacturer, they sent me a new one which has the same vibrations. So I can only use that one with cutting discs where the vibrations aren't as bad.

    • @BrokeLifeEU
      @BrokeLifeEU  11 หลายเดือนก่อน +2

      YOU ARE RIGHT! I don't know what I was looking at... I will add this to the description as a disclaimer!

    • @BrokeLifeEU
      @BrokeLifeEU  11 หลายเดือนก่อน +1

      I get the feeling that Parkiside turn to Grizzly tools whenever they want a cheaper tool and a bigger profit margin. In the end the quality suffers from it.

    • @Vrabetzz
      @Vrabetzz 11 หลายเดือนก่อน +2

      @@BrokeLifeEU Not necessarily. The 12V Angle Grinder (PWSA 12 B1) is made by Grizzly Tools as well and it's great aside from the switch which isn't as easy to press as I'd like. I even bought a second one to avoid switching the discs.

    • @kiky2h
      @kiky2h 11 หลายเดือนก่อน

      We always must looking for the right model! I don't bought still a drill, The PPBSA 20-Li A1, looks very close to PABSP 20-Li C3

    • @Vrabetzz
      @Vrabetzz 11 หลายเดือนก่อน +1

      @@kiky2h I've got the PABSP 20-Li C3 and can't say anything negative about it so far.

  • @Failsafeman100
    @Failsafeman100 11 หลายเดือนก่อน +1

    The B2 is a handy machine, so much slimmer than the 12v one and about the same price. Just don't use it for long with an 8Ah, the heat and vibrations can melt the battery pack onto the machine and you'll find yourself having to use a mallet to dislodge it!

    • @BrokeLifeEU
      @BrokeLifeEU  11 หลายเดือนก่อน +1

      Really? I never tried the 12V as I thought it might be too weak. But I did not think it would be bigger.

    • @Failsafeman100
      @Failsafeman100 11 หลายเดือนก่อน +1

      @@BrokeLifeEU Yeah I was surprised too, the handle is really bulky in comparison. Haven't tested it yet, just picked it up on promo to have a backup 👍

  • @borislavavacheva7425
    @borislavavacheva7425 11 หลายเดือนก่อน +3

    Hello! Your C3 is faulty I guess. I have the B2 and C3 - The C3 has more RPM and the noise is ear piercing only when cutting tile. The vibration in the handle on both is the same for me.

    • @BrokeLifeEU
      @BrokeLifeEU  11 หลายเดือนก่อน

      Thank you for letting me know! I will see if I can get my hands on another C3. However at this time it looks like it is more like a hit and miss with the C3. Either it is a good unit or a bad unit. And it looks like it is 50-50 for now. Where was yours bought from?

    • @georgevachev4356
      @georgevachev4356 11 หลายเดือนก่อน

      @@BrokeLifeEUHi, my wife was logged in and my first comment is from her account. It is bought from Lidl Bulgaria and it is the “latest” release of the C3 version. The B2 model is OWIM and build quality is superior.

    • @BrokeLifeEU
      @BrokeLifeEU  11 หลายเดือนก่อน

      Yes, OWIM is correct for B2 I don't know why I said Grizzly. I hope the C3 you have is better than the one I tested!

    • @georgevachev4356
      @georgevachev4356 11 หลายเดือนก่อน

      After all it is a hobby tool and you get what you pay for. Cant complain about the comfort 😁

    • @BrokeLifeEU
      @BrokeLifeEU  11 หลายเดือนก่อน

      True it is a hobby tool! I just thought it is worrh knowing the difference between the B2 and C3.

  • @18bagabooo
    @18bagabooo 6 หลายเดือนก่อน +2

    very interesting find, I actually got the B2 out of the cheap price and small looking form factor. It's actually smaller than my dewalt 18v multitool, and even smaller than the old parkside 12V multitool. This B2 has to be added to a Parkside hidden Gems list. They do have a few actually really decent tools, from both 12V and 20V ranges. Also some of their grinder - and circular saw - because in UK you can only get 4Ah battery, very underpowered. I bought a dewalt to parkside adapter - makes the tools that can do with more current perform on a whole new level. I usually use the 5A dewalt power stack - that thing is mad. And if torque tool test channel is to be believed, the protection is built into the parkside battery pack, not into the tool, hence why with dewalt they can take as much as they can dare. It's a risky game tho, first gen 20v parkside grinder went up in smoke because I was pushing it really hard, cutting bitumen sheets (makes the disk bind up/grubby) - anyways, for £25 for the grinder and grinder bought maybe 5 years ago, I didn't cry much. Bought another one straight after - this despite dewalt's offering being down at £140 at the time for the body only.

    • @BrokeLifeEU
      @BrokeLifeEU  6 หลายเดือนก่อน +1

      The good part of going for Parkside is the price. Even more so if you get a discount. You use it as much as you can and when it goes wrong as you say you don't cry too much. I even know of certain mechanics that use Parkside tools as their main tools and they are satisfied with them.

  • @shortymcsteve
    @shortymcsteve 4 หลายเดือนก่อน +2

    Yikes. I think they are selling the C3 version again and I was looking for one of these tools. I guess I’ll wait for the D4 and hope that’s better.
    It’s pretty interesting how different these look compared to the A1. I wonder how those compare.

    • @BrokeLifeEU
      @BrokeLifeEU  4 หลายเดือนก่อน

      You know there used to be a brushless Performance one. Shame they don't make it anymore. As for this one I would not buy it personally. Either I would go for the older B2 or wait for a newer one.

    • @shortymcsteve
      @shortymcsteve 4 หลายเดือนก่อน

      @@BrokeLifeEU I didn’t know that. In the U.K. they don’t sell the performance range unfortunately, but Kompernass told me that they would still cover the warranty if I bought an item from a Lidl store in another country that does.
      I recently bought the PFBS 160 C3 and in the store they also had the B2 on the shelf (for more expensive!). Now I’m wondering what the difference is. I did ask during the email with them and they told me it’s basically the same.
      Do you know of any websites where people discuss Parkside tools and their differences? The only place I’ve found any information is here on TH-cam.

  • @davidasdasd4666
    @davidasdasd4666 11 หลายเดือนก่อน +3

    Holy shit I actually have a pair of 4 pot Alfa Romeo Brembo breaks I want to respray 😂

    • @BrokeLifeEU
      @BrokeLifeEU  11 หลายเดือนก่อน

      You are joking 🤣🤣🤣

  • @emeagain8359
    @emeagain8359 2 หลายเดือนก่อน +1

    How do you know which model is which. Thanks

    • @BrokeLifeEU
      @BrokeLifeEU  2 หลายเดือนก่อน +1

      It is usually marked on the tool somewhere as well as the box. However if you want to see the manufacturer that is in most cases in the small print on the back of the tool.

  • @Sadik15B
    @Sadik15B 10 วันที่ผ่านมา

    I have had the previous model and the motor shaft kept breaking everytime.
    Thr never model has a rubber coupling to reduce hormonics.

    • @BrokeLifeEU
      @BrokeLifeEU  8 วันที่ผ่านมา

      By the older one do you mean the B2?

  • @kiky2h
    @kiky2h 11 หลายเดือนก่อน +1

    Hi! When a brushless performance?

    • @BrokeLifeEU
      @BrokeLifeEU  11 หลายเดือนก่อน

      Hello! They had one a while ago but is now discontinued so I guess there was not much interest in a brushless Performance multitool.

    • @Failsafeman100
      @Failsafeman100 11 หลายเดือนก่อน +4

      Yeah the performance one was discontinued and still highly sought after online from what I see. Seems like everything released ever since the Arnold ad campaign and the switch to new packaging has been inferior. Like the brand's peak was 1-3 years ago when it was expanding the performance lineup and the quality was stable. God knows how much they've invested in marketing last year, but we're paying for it now it seems!

    • @BrokeLifeEU
      @BrokeLifeEU  11 หลายเดือนก่อน +4

      Unfortunately that does seem to be the case! Nothing I have tried with the new packaging is better than any way shape or form. That must have been a really big check for Arnold.@@Failsafeman100

    • @zvon8294
      @zvon8294 11 หลายเดือนก่อน +1

      ​@@BrokeLifeEUI have one. Would you slike to test it?

  • @atanaspopov6204
    @atanaspopov6204 11 หลายเดือนก่อน +1

    Струва ли си?В лидл го има на 60 лв в момента

    • @BrokeLifeEU
      @BrokeLifeEU  11 หลายเดือนก่อน +1

      За мен, ако има наличен B2, това е по-добрият вариант. B2 беше 25 EUR на разпродажба, но сега е 50 EUR. Така че за половин цена бих казал, че C3 е добър избор.

  • @dompit9535
    @dompit9535 4 หลายเดือนก่อน +1

    Bought new and my front Led doesn't work. Should I return it ? xD

    • @BrokeLifeEU
      @BrokeLifeEU  4 หลายเดือนก่อน +1

      I would return it. Never a good sign to buy something brand new and discover some parts of it don't work. They have a warranty so it is best to make use of it. Did you try it out?

    • @dompit9535
      @dompit9535 4 หลายเดือนก่อน +1

      @@BrokeLifeEU yeh everything else seem to be working fine, was wondering if there are extra buttons i wasnt pressing for the light. Btw the whole packaging smells like it came out of a crypt, its weird hehe

    • @BrokeLifeEU
      @BrokeLifeEU  4 หลายเดือนก่อน

      @dompit9535 That does not sound good who knows where it was stored.

  • @silverscream8589
    @silverscream8589 4 หลายเดือนก่อน

    I have one of these C3 models. Vibration and noise is so bad. Mine stops oscillating suddenly as soon as I would like to cut something, or just I turn in the angle to cut. I have to remove the battery turn off with the switch, but back the battery and start again, then stops oscillating again. It is painful to use. The latching mechanism seems to be broken now.
    I’m not sure how they ended up this bad.
    I found your video when was wanted to find out if its normal that this loud, but now I see its a bad product. I’m going ti definitely return to Lidl. Shame, because I need a good multi-tool.

    • @BrokeLifeEU
      @BrokeLifeEU  4 หลายเดือนก่อน

      The older one was made by OWIM and I like their build quality I have a drill by them and has been very good. The C3 is made by Grizzly which I think is the worst manufacturer of Parkside tools. If you have seen the other comments on the video most people say the C3 is too loud and the vibrations are too much. There are one or two good comments about the C3 but they could have just got the one or two good units that fit together just right. It is the same with the Parkside Performance impact drivers, the older B3 model made by Kompernaß is better than the newer C3 made by Grizzly. As for the multitool that you need if you manage to find one of the older B2 models by OWIM I think you will like it.

    • @Solipsfilm
      @Solipsfilm 3 หลายเดือนก่อน +1

      I have the same problem, the moment I just as much apply a tiny bit of pressure the oscillating stops and it doesn't cut... I can barely get through drywall 😅 Must be broken, opened it up but can't find what's wrong. Sadly enough I only used it 3 months after purchase so I can't send it back anymore, what a shame 😔 If available I always buy their B2 models now, the latest range of products is just terrible.. Had to send back many tools where the previous range was fantastic.

    • @BrokeLifeEU
      @BrokeLifeEU  3 หลายเดือนก่อน

      @@Solipsfilm I am sorry to read this! I hope you manage to resolve the issue as soon as possible! They just released some Performance line stuff for multitools so I hope there is a Performance multitool in the pipeline. As their newest 12V Performance stuff is made by Kompernaß I do hope that will be the case if they decide to do a 12V Performance multitool. Fingers crossed! 🤞

  • @lunatiy
    @lunatiy 11 หลายเดือนก่อน +2

    I bought the c3 version and gave it away, so much vibrations head rattles like crazy(holds on to the attachment but feels like it's broken inside) insanely loud, really dissappointed, not buying another tool before checking out reviews online

    • @lunatiy
      @lunatiy 11 หลายเดือนก่อน +1

      also tried using it to cut away mortar to replace a broken (glass) brick it was useless, used angle grinder instead...

    • @Failsafeman100
      @Failsafeman100 11 หลายเดือนก่อน +2

      Me too I always wait a bit to read the reviews to see some consensus, however ideally I like to see the tools tested first in this kind of format. Ideally in a direct comparison with another model or brand. That's why channels like this one are so valuable - nothing beats seeing them in action!

    • @BrokeLifeEU
      @BrokeLifeEU  11 หลายเดือนก่อน +2

      Thank you! That is what I am trying to do. Seeing them go head to head the newer and older model I think will answer most of the questions.

  • @akierum
    @akierum 8 หลายเดือนก่อน +1

    Just returned 2 12v versions of same tool, loud as hell. Unusable

    • @BrokeLifeEU
      @BrokeLifeEU  8 หลายเดือนก่อน

      Which tool?

    • @akierum
      @akierum 7 หลายเดือนก่อน

      @@BrokeLifeEU Finally got 4th unit that works properly, nearly silent on speed4. LiDL Quality is very very bad. Multitool