Your channel is awesome, I love the silent work, as well as the blogs. You have a shop full of power tools, and are able to pull away and work only hand tools. You inspire me!
I love the sound of hand tools in a quiet shop! It's easy to see that you get a lot of satisfaction and enjoyment from the process. If I had the time, that's all I'd use. Thanks for sharing!
Very timely for me, a large yew and a cherry felled in the property behind me. Managed to get a couple of lumps that would fit this project. Looking forward to similar.
It's always been a pleasure to watch someone making something out of a tree without the use of election power tools,ts good to know that the old ways still exist,your video gets my 5 ☆ rating
Nice final product. I like how you mentioned the book, and the idea inspiration. My mother in-law is a librarian so I think a set of these will be making their way out of my shop.
A thin piece of metal at the bottom that sticks out to go under the books would keep them standing up if the books were heavier. Love the look of them!
Andy, I wonder if you sometimes need a decent sized chopping block somewhere in your shop. I’ve noticed that you sometimes try and work with things that are a bit too tall for you, and you need to stretch pretty far upward. I can tell you from personal experience, a chopping block is for more than just splitting wood. It’s a stand for display, a shelf when you need one, and when you’re a bit exhausted, it’s a nice bench waiting for you! Just wanted to throw a few thoughts out there. I love your work! Cheers, - Nightshade
Muy i genios y lindo, pero con todas las herramientas que vi en tu taller, era necesario hacer esto a mano?, usando hacha, cepillo de mano y formon y gubia ???
I like the book ends Andy. Did you use a finish on them after they were completed and wonder what you'd use? A clear or amber shellac might look nice.👍
Love the Video's Andy! Keep them coming! Question, the wood looks kind of wet, are you worried about splitting did you put on any sealer to help prevent this?
i wonder why you use the bandsaw to cut the log in half but an axe to cut it in half again only to be bothered by using a plane forever to smooth it out. Wouldn't bandsaw and light plaining be more efficient? Since you have used a powertool anyways
Could I ask a newbie question? I have a 62 like yours, it's my first hand plane. I've gotten into the habit of tightening it so tightly that it has to be loosened to adjust the depth. So whenever I adjust the depth, I loosen it before and tighten it after. Is that supposed to be necessary, or am I doing something wrong? I noticed that at 3:16 you adjusted without messing with the tightening knob. Mine is a lie nielsen. Thank you for your time!
I can't speak to the 62 specifically but on normal bevel-down planes you don't need to have the cap screw that tight. Just go into your shop and mess with it for a bit and try loosening it a little bit at a time until you can move the adjuster while the blade is locked down. You'll be suprised at how loose it can be until it starts slipping.
That knob there is supposed to move the plane blade up or down, in his case the blade was to high up so he set it lower in order to get a tiny amount deeper into the wood and that knob does that automatically so he can get precise cuts. I had a similar thing happen to me when I got my first plane blade I forgot to put a piece in that allows me to do that, so if I wanted to move the thing up or down I had to loosen, move it a fraction, and tighten back into place. If you took it apart in the past and had an extra piece you should look for it, if not then you may have set it up wrong. Of course I have never used a lie nelson plane before but I think thats what you’re talking about.
You shouldn’t have to loosen the cap screw to make adjustments, just keep it tight enough to hold the blade securely. There’s a sweet spot for that and it takes some adjustment to find.
I love craft videos with no annoying youtube music. The noise of the shop is all we need. Keep it up!!
Andy actually spends 80% of his time on every project moving his camera to get awesome shots and making awesome vids
It’s true!
Rr
Visit my channel ..... like n subscribe if u like... thnks🙏🙏
@@gemonkselemchannel2884 no
good.
Something very soothing and relaxing about these videos where all you hear are the tools and natural noises it’s awesome
Your channel is awesome, I love the silent work, as well as the blogs. You have a shop full of power tools, and are able to pull away and work only hand tools. You inspire me!
Thanks!
I love this content because he doesn’t say a single word so peaceful
Enjoy, enjoy! So many of the channels I follow make themselves the star instead of the project. Thanks for doing it right.
I love the sound of hand tools in a quiet shop! It's easy to see that you get a lot of satisfaction and enjoyment from the process. If I had the time, that's all I'd use. Thanks for sharing!
How often do you get shaved wood in your coffee? It seems like the answer wood be a lot.
Well played.
Please cease
How wood you be sure
this pun is so bad im gonna log out
You guys are soo immature and I can’t believe you write these hateful reply’s, why can’t you guys leaf each other alone
Very timely for me, a large yew and a cherry felled in the property behind me. Managed to get a couple of lumps that would fit this project. Looking forward to similar.
This is awesome and I'm gonna start wood working cause of you. Thanks for the inspiration
I love hand carving. You got yourself a new sub
These videos are just so soothing I think 😀👋🏽
Been with ya from the start. Just wanted to say the videos and work is amazing. Keep it up. And thank you for sharing your talent with us
Thanks for the long time support!!!
It's always been a pleasure to watch someone making something out of a tree without the use of election power tools,ts good to know that the old ways still exist,your video gets my 5 ☆ rating
Thank you!
M
Ay xit cat
He used a power saw but it truly is a great project
Не класнй вйдо🤣🤣🤣🤣😎😎😘😘😘😘😎😎😎🤣🤣🤣🤣
😍😍😍😍😍😍😍😍
This video has such good camera angles and an overall good production of the video
Nice final product. I like how you mentioned the book, and the idea inspiration. My mother in-law is a librarian so I think a set of these will be making their way out of my shop.
I love this channel the first video I watched was you making and air plane for your kid
Andy LOVE you works
Good looking project. You are a true craftsman.
When you are walking in with the log - no apron. New angle - now you have an apron. There is magic in this one.
How you’ve managed to make loud carpentry super relaxing is beyond me
Qpf
This stuff cures anxiety
Not to me
These type of videos with the tools you use and with what you do relax me a lot ^_^
Another great project! Definitely thinking about some Christmas gifts now!
Gotta love it when a man reaches out of frame to grab a sharp axe and uses to make quick work of a project lol great video very cool
A thin piece of metal at the bottom that sticks out to go under the books would keep them standing up if the books were heavier. Love the look of them!
That mini tri square is so cute
Watch one video and instantly hooked 👍 best of luck 🤘
Same
I love your art Andy 😍👏👌
Pretty wood. Nice job.
keep up the good work Andy. Thanks for sharing this video with us.
Today is the day that I finally subscribed to Andy Rawls
That's one helluva nice shop you've got. Thanks for sharing your process!
Andy, I wonder if you sometimes need a decent sized chopping block somewhere in your shop. I’ve noticed that you sometimes try and work with things that are a bit too tall for you, and you need to stretch pretty far upward. I can tell you from personal experience, a chopping block is for more than just splitting wood. It’s a stand for display, a shelf when you need one, and when you’re a bit exhausted, it’s a nice bench waiting for you!
Just wanted to throw a few thoughts out there. I love your work!
Cheers,
- Nightshade
Not a bad idea! Thanks
It's nice to see someone doing stuff without big fancy power tools for a change
I love your work
Nice project Andy! Cool to see you take a small log and turn it into nice book ends.
Very nice Andy.
We’re do you get your tools from????
So good your job
Yyyayy new video ❤️❤️❤️ I love it! I might make them for my library
Great.. final product is nice
That's a good looking chunk of wood! What sorta tree was it? How long was the limb lying there outside?
that fallen tree limb makes a masterpiece.
Wow that woodeorking storage😲
Thanks Andy!
nice work man 👌
sound so good~~!thank you for this video
You’re welcome...thanks for watching!
I'm wondering what super cheap gouge I should buy. I know I want to be able to hit it with a mallet but don't know if you can hit wood handled mallets
How’d you store it to dry or you letting it check etc naturally?
How do you know when you’ve cut the wood enough
Super bro👌
Available for purchase? Beautiful book ends.
What is the name of that tool at 7:21 and at 7:39 thanks!
Muy i genios y lindo, pero con todas las herramientas que vi en tu taller, era necesario hacer esto a mano?, usando hacha, cepillo de mano y formon y gubia ???
what is the difference between wood working and wood carving
How often do you get splinters?
Have u ever looked at the dislikes and thought why? Who? From where? Gets me every time
I like the book ends Andy. Did you use a finish on them after they were completed and wonder what you'd use? A clear or amber shellac might look nice.👍
Hey Andy it will be very nice if give as info about how long takes it to make such a project , maybe in description :)
It took about two hours to carve these.
@@AndyRawls Thank you :D
Love the idea of making stuff from the Book, looking forward to futute Videos, thx for sharig, I really enjoyed the video man, thumbs up! :)
When you make mine, leave some bark on the sides of where you made the gouges. Thanks!
What kind of wood is that
Enjoyed and gave it a thumbs up
Would you make a video showing how you made your work table? I love it and want to make myself one!
Love the Video's Andy! Keep them coming! Question, the wood looks kind of wet, are you worried about splitting did you put on any sealer to help prevent this?
Yes, it will split as it dries and there’s not a whole lot that can be done about it, especially with oak. I think it will just add some character.
Thanks bro.
Hey Andy I love your videos keep it up
How do you distinguish between a tree limb and a branch?
i wonder why you use the bandsaw to cut the log in half but an axe to cut it in half again only to be bothered by using a plane forever to smooth it out. Wouldn't bandsaw and light plaining be more efficient? Since you have used a powertool anyways
I forget every single time to turn on captions when I watch one of your videos.
Saint Joseph would be proud
Do you have a jointer in your shop
and what is the difference between widdling and carving
Are those “live oak” trees?
super nice Andy.....By the way,,,, your chickens got it good.... lol
Best carving channel on youtube. Even better than bobby duke
Could I ask a newbie question? I have a 62 like yours, it's my first hand plane. I've gotten into the habit of tightening it so tightly that it has to be loosened to adjust the depth. So whenever I adjust the depth, I loosen it before and tighten it after. Is that supposed to be necessary, or am I doing something wrong? I noticed that at 3:16 you adjusted without messing with the tightening knob. Mine is a lie nielsen. Thank you for your time!
I can't speak to the 62 specifically but on normal bevel-down planes you don't need to have the cap screw that tight. Just go into your shop and mess with it for a bit and try loosening it a little bit at a time until you can move the adjuster while the blade is locked down. You'll be suprised at how loose it can be until it starts slipping.
And what you're doing isn't actually hurting anything, its just a bit overkill
That knob there is supposed to move the plane blade up or down, in his case the blade was to high up so he set it lower in order to get a tiny amount deeper into the wood and that knob does that automatically so he can get precise cuts. I had a similar thing happen to me when I got my first plane blade I forgot to put a piece in that allows me to do that, so if I wanted to move the thing up or down I had to loosen, move it a fraction, and tighten back into place. If you took it apart in the past and had an extra piece you should look for it, if not then you may have set it up wrong. Of course I have never used a lie nelson plane before but I think thats what you’re talking about.
You shouldn’t have to loosen the cap screw to make adjustments, just keep it tight enough to hold the blade securely. There’s a sweet spot for that and it takes some adjustment to find.
@@AndyRawls (and everyone else) Thanks for the helpful input! I'll tinker with it and figure it out.
What wood ? Hickory?Mesquite?
It’s red oak.
Anyone know what little draw knife he uses???
he really shows you that beautiful things can be made with just hand tools.
Hey Andy I’m 16 what chisels do I buy for carving I have only been using my knife for a year so what brand u recommend and how do go to sharping them
Nice! Well done! Mesquite I presume?
You got yourself a new subscriber
*Good Work, Friend. Regards You.*
hey Andy whats a good project to make for a father for Christmas
If you have a lathe, bowls are really fun. Some of my favorite gifts to people that I made were bowls
Класс👍👍👍 просто и красиво!
very very good
very good.
Where can I get a good hand planer
Что за дерево?
What kind of tree?
Very inspiring thx!
Sweet vid!
Woah, I was wandering when I was gonna hear his voice
They dont look heavy enough for bookends but they do look good
It's red oak, they're plenty heavy enough.
Yeah...those are dinky books.
Is nick offermans book good? I thought about buying it, just wondering.
kasey amerson I liked it, he has a dry sense of humor that matches mine pretty closely
I liked it. His sense of humor is always entertaining in my opinion.
Love your "Go and Make It" slogan. When is this going to appear on hats?
Nah ini yang bisa bikin relax
I remember, i was cutting wood once, and i was attacked by Mutant Ninja Rats!
How wet is that lumber?
I have the same question. Won't the bookends warp all out of shape as they dry??