Not sure what prop size u use.but if you are using a cnc 34/14 with 3s and temps are good than i would try a 36/14 cnc. Should add 5 mph plus better take offs out of the hole..its always best to find best prop with 3s rather than go to 4s imo... props,struts and cg are most important with boats
This boat actually benefits from having 4s because the stock motor is only 1700kv witch is to slow for 3s but I get what your saying and how it will hey
It is better for stability to run two 2s batteries in series 👌 I have a video running 5s in it. It is probably the video you refering to 😊 I will recomend to go up in pitch on the prop 😊
Hi, where found alloy propeller ?
that swap dog could be made into a very decent rescue boat with a couple of simple mods...
It is very fast but why it was sinking?
the left side of the hull is made to sink so it can automatically flip over
What prop are yiu using
Cool recovery Bro!
why it will cut off ?
Amigo manda o link dessa bateria 4s por favor?
How much milimeter the proppeler
Nice video Bro !! Where are you buy the propeller ? Thks ;-)
From taobao but it's available on aliexpress as well
@@EdwardChew Can't find it wheather on Aliexpress nor on Banggood. Coult you pls link the aluminium prop blade in your description?
@@EdwardChewcan you give a link please
Not sure what prop size u use.but if you are using a cnc 34/14 with 3s and temps are good than i would try a 36/14 cnc. Should add 5 mph plus better take offs out of the hole..its always best to find best prop with 3s rather than go to 4s imo... props,struts and cg are most important with boats
This boat actually benefits from having 4s because the stock motor is only 1700kv witch is to slow for 3s but I get what your saying and how it will hey
Does 3s 5000mah fit ok
nooooooooooooooooo
So existing ESC n motor can run with 4S
Yeah. I didn't modify anything. Someone even tried 5s
I have a video running 5s
Can U actually run these on 4s on stock??
yeeeapp it works. there are people who even run it on 5S
Prop shaft diameter in mm ??
Thanks !
4mm i think. sold the boat already
Cool boat ride👍👍💯💯😎😎
4s, wow that's cool,
It is better for stability to run two 2s batteries in series 👌
I have a video running 5s in it. It is probably the video you refering to 😊
I will recomend to go up in pitch on the prop 😊
Hey man yes you are the only one! Haha
What 2s capacity did you try?
Where can I get the batteries and an American charger for them?
Oh I didn't know that it can do 4s.
someone even did 5s man!
it seems to be programmed for 4S as well cause the low voltage cut is spot on
I have a video running 5s 😊👌
nice try..power
Awesome
great!