Really pleased with my ZL1 Rock Guards I bought for my 2020 Scat Pack widebody 50th Anniversary Commemorative Challenger.Look great on the car and were very easy to fit. Used a mix of both sizes of the clips provided and also drilled the end cap trim to use the screw for a secure fit. A word of thanks to the guys at ZL1 ADDONS for a great product and super service in getting my parts across the pond to the UK.Cheers guys.
I just finished installing mine on my widebody redeye. Its a nice product. For those of you with widebodies: There is a reason he has the car on a lift and the tires off. But it can still be done with the car on the pavement. The guards come in a cardboard sleeve. Save it, it makes a great kneeling pad. Second, the clips are open too much for the front install. You will need some pliers to crimp them down some. The clip he has trouble with on the front is a real bitch to install. Save it for last. For the rears, flatten the edge on one side of the clips. This side will go on the fender side and the other side goes on the rockguards. The rear fenders are very tight and the clip has to slide straight in to catch. It took me about 30 minutes for the complete install. The clips really lock the guards into place so you probably wont need the screws. Finally the guards are still a little too narrow. They need another 2 inches of width.
These are an absolute pain in the ass to install on the rear wheel wells. Then to top it off the next day after a carwash both the rear ones fell off. I hope the front ones last better since they're the more important ones anyway.
If you;re hand washing your vehicle, these should not just fall off. Are you using the proper clips for the rear so that the guards are tight against the vehicle?
Yeah, the small clips fit on the front and they've stayed on but the back only took the large clips. Also there was no holes to screw into where every video showed there was one.
Really pleased with my ZL1 Rock Guards I bought for my 2020 Scat Pack widebody 50th Anniversary Commemorative Challenger.Look great on the car and were very easy to fit. Used a mix of both sizes of the clips provided and also drilled the end cap trim to use the screw for a secure fit.
A word of thanks to the guys at ZL1 ADDONS for a great product and super service in getting my parts across the pond to the UK.Cheers guys.
I just finished installing mine on my widebody redeye. Its a nice product. For those of you with widebodies:
There is a reason he has the car on a lift and the tires off. But it can still be done with the car on the pavement. The guards come in a cardboard sleeve. Save it, it makes a great kneeling pad. Second, the clips are open too much for the front install. You will need some pliers to crimp them down some. The clip he has trouble with on the front is a real bitch to install. Save it for last. For the rears, flatten the edge on one side of the clips. This side will go on the fender side and the other side goes on the rockguards. The rear fenders are very tight and the clip has to slide straight in to catch. It took me about 30 minutes for the complete install. The clips really lock the guards into place so you probably wont need the screws. Finally the guards are still a little too narrow. They need another 2 inches of width.
agreed, they need to be wider, 800 miles on my widebody and chips all over in front of the rear fenders, front rock guards do need to be much wider.
If screws are used, what are you screwing into? Plastic?
Instead of using that screw at the bottom would double sided tape work?
Anyone know where I can buy replacement clips some of them broke off when I was washing the wheel wells
Why couldn't the standard body be this easy especially for the rear?
Would this fit charger widebody ?
Would these work for my challenger if I add the Vicrez Widebody kit? Im trying to install them, but dosent work!
Update: they dont fit at all
These are an absolute pain in the ass to install on the rear wheel wells. Then to top it off the next day after a carwash both the rear ones fell off. I hope the front ones last better since they're the more important ones anyway.
If you;re hand washing your vehicle, these should not just fall off. Are you using the proper clips for the rear so that the guards are tight against the vehicle?
Yeah, the small clips fit on the front and they've stayed on but the back only took the large clips. Also there was no holes to screw into where every video showed there was one.
I looked on your website and can't find them for a 2019 wide body?
Link is in the description: zl1addons.com/products/copy-of-challenger-18-wide-body-demon-standard-rock-guards