Before starting any fiberglass crack repairs first Drill holes at the end of the crack which stops the cracks from spreading otherwise even after the repairs when the fiberglass piece flexes, the cracks reappear and you'll have to do the work all over again Also for holes in your splitter you should repair the fiberglass piece from inside out which will create a long lasting repair job Don't take any offence I am just sharing what I have learnt which might help you
Hey devin good video as always, quick tip for spraying paint and primer- typically you wana spray at a relatively low psi depending on the type of paint, sounded like your were spraying at a high pressure which could of caused the run.
A few years ago I painted & fitted a body kit to a friends that consisted of a lip and skirts, the guy went over a speed bump 2 days after getting them on the car, we repaired like this and then filled the insides with expanding foam, they never cracked again after many speed bump hits
It was a lost cause fox10 School cool car I wish I had a river exchange like you Nokia x2 x 10 Evo X gen or a Nissan skyliner or into your super Nepal Ka or Walker the orange Toyota Supra August 1 Paul Walker on 2 Fast 2 Furious but don't knock your own and my birthday is on the 16th of May I wish I had a car
Damn, if I would've known, I have that bottom under lip for sale. I have the varis version 09 bumper like you and updated the underlip with another varis lip, so if you're interested, I'll sell and ship it to you. I know I'm watching the video of you working hard to repair it, but the offer still stands
I think you need to look for a new machine shop because this one is letting down a couple times I hope is not going to be like the last time they take a week to give you the block I'm fire up to see the evo back running
Devin can literally do almost anything on his cars on his own that's just amazing
You'll be able to as well as long as you try
Before starting any fiberglass crack repairs first Drill holes at the end of the crack which stops the cracks from spreading otherwise even after the repairs when the fiberglass piece flexes, the cracks reappear and you'll have to do the work all over again
Also for holes in your splitter you should repair the fiberglass piece from inside out which will create a long lasting repair job
Don't take any offence
I am just sharing what I have learnt which might help you
I would extend the aluminum by having your brother weld an extension onto the existing plate. It would be good to see both of you working on it.
That rear glass needs to be re tinted devin
It's crazy how much I look forward to Devin's videos. Love the videos 💯🔥🔥🔥 Keep up the grind, it's appreciated more than you realize!!😁👊🏻
That Evo Man
Nothing is impossible to a willing mind. I really appreciate your skills. Thanks for a man of all jobs.
Dude, perfect timing with this video! Attempting to fix my fiberglass battleaero wing this week. Keep up the content man, love every vid!
Watching from South Africa 🇿🇦
Lekker lekker
Is there no end to your talents. 👍
Finally watching from UAE 🇦🇪
Neil David why finally ? What was hindering you watching from UAE?
Always inspiring to watch your channel man. Got me doing things to my evo by myself now and they are turning out pretty good... Thanks
Honestly a true inspiration for me considering, I've been neglecting to do any body work on my RX8
My guy WE LOVE ALL YOUR CONTENT. Dont just do one for a few then another drop them videos!!! Sh*t even blogs with cruises would be dope
Great work with the fiber glass! Gives me hope if I ever crack my Seibon front lip!
Hey devin good video as always, quick tip for spraying paint and primer- typically you wana spray at a relatively low psi depending on the type of paint, sounded like your were spraying at a high pressure which could of caused the run.
Devin, you're the man!
Flow Designs are the only one that make splitters from HDPE, high density polyethylene same stuff protective headgear is made of, it won't ever crack.
Saludos desde Perú
Looking clean.Talent bro!👍
Definitely missed seeing you work on the X!
Great job stepping outside of comfort zone...splitter fix looks great.
Bro is like to live a life like this working on my cars and just learning as I go along
Soo fire man🔥🔥🔥 keep up the amazing work!!!
A few years ago I painted & fitted a body kit to a friends that consisted of a lip and skirts, the guy went over a speed bump 2 days after getting them on the car, we repaired like this and then filled the insides with expanding foam, they never cracked again after many speed bump hits
About time... some Evo x stuff.
Very impressive!
You’re the burrito supreme amigo. Great content.
Does blacking our your housings effect how bright your lights are?
just a little bit. You may have to readjust your headlight angle after blacking out the housing
That's look sick🤩🤩
It looks Awesome ☮️
That Evo looks like a bad boy.. Nice
Spray foam also works as a bondo if you’re trying to do another quick fix in the future
Black wheels no wing!! 😍😍🔥🔥🔥
Is there multi color lights like those for Evo 9?
Dude, you can do ANYTHING! Did you clear coat the black paint on the bumper?
Black UHMW plastic would be the best scrape guard . Thats what they use under airboats to run on dry ground and roads
The lip came out great!
me encanto tu video Devin.aparte kme gusta que si no enseñas aser y asi aprendemo mas
Amazing Evo
Devin! Can you do a video on changing out the fuel regulator on the Evo x?
It was a lost cause fox10 School cool car I wish I had a river exchange like you Nokia x2 x 10 Evo X gen or a Nissan skyliner or into your super Nepal Ka or Walker the orange Toyota Supra August 1 Paul Walker on 2 Fast 2 Furious but don't knock your own and my birthday is on the 16th of May I wish I had a car
I can be your friend your best friend
Damn, if I would've known, I have that bottom under lip for sale. I have the varis version 09 bumper like you and updated the underlip with another varis lip, so if you're interested, I'll sell and ship it to you. I know I'm watching the video of you working hard to repair it, but the offer still stands
Bad ass evoX 🔥 fireeee
Good job Hass 👌, that looks good brother 👊💪
Have you ever thought of building for your self a car like a 2003 lancer oz rally which is like a evo 7 & 8 it’s a cool car if your interested
Look so awesome
LOOKS SICK😎👌🏻
Do a other 10 minute video
Good job Keep it up 👍👍💪👌
So how could i get a jacket the dark grey an white love it how it looks
Make the extra splitter out of a carbon sheet, will look fire
Awesome 🔥
What happened to evo 8 engine rebuild ????
techkid011 just wait, block should've been done on Monday. He's probably editing that vid as we speak (or the block was delayed again)
You should for sure do the skid plate
hey Devin how do you like the ss 595 tires? i just received mine and will install them soon.
Great content!! When you putting a lift in the shop???
That a badass evoo!
devin when are we getting some frs content?
I was like another broken car!!! But nice work! You got me. 😉
What is the fiber glass glue stuff called?
What tire size is on your Evo 10? 🔥
Yeeeeeeeeeeeeeees :D ❤❤❤❤❤❤
👍👍👍👍👍
Nice
I'm from syria bro😎😘🇸🇾🇸🇾
She built!
Super nice ✌
it was show brother🔥
After listening to that cold start, I am SO glad I'm not his neighbor...😂
YAAAAAAAASSSSS EVOOOOO TIMEEE!!!
I think you need to look for a new machine shop because this one is letting down a couple times I hope is not going to be like the last time they take a week to give you the block I'm fire up to see the evo back running
dude! how can you identify if it is EVO X or its a natural Lancer Ex
No pull for the boys🙁
Эвик X просто топ!
You need to do gold rims on the evo, and change the red to an gold !!
Watching from kuwait ..
Been here for almost a year now. Still have no idea what VASYN means....
track list pls
Devin you stay shitting on car youtubers bro. It came out amazing honestly 🤘🏼
I just want to know what you do for an income (besides YT) and how did you acquire all that land and the garage!?
Anthony Apodaca he’s made videos about it, maybe a year ago.
👍🏻🔰
Juan Carlos se ve Cb ese Evo
I’d love if I could send my headlights to you to get them done so I can change the colors like that
MAKE the skid plate splitter.
Love the half wrap on the Evo
not sure you need to sand so much, if you're laying down new glass...
Should of used ramen noodles to repair the splitter lol
nice evo
you should open a shop
Da Evo needs liberty Walk body kit 👍
Next time use a heat gun to start the process.. it'll be hardened withing 20-30 minutes then.
Those are projector lights not reflector so it doesn't matter
I'd almost change those wheels to black and go wingless.
Seems like it’s time to find a new machine shop lmao
🐱🏍
Blake love Devin
Guyssss. what engine is this? Can someone tell me?? Thanks in advance #dreamcar
Everything in that garage is going to have paint on it.
wheres the evo 9 bro?
Love the channel bud, but I think she’s time for a new project vehicle.... how about a 4 by.... maybe a Jeep tj or fj... what do ya think
yeahhhhhhhhhhhhh new video......
Ya know? You can actually change your oil every 3k to 4k. You seem to change it every 100 miles. LOL
Amazing hope u don't sell it.