Victory Saber is a good release but it is a shame that multiple units had QC issues, lucky that Hasbro are sending replacement parts out to customers though.
It would’ve been cool if victory Leo was designed where his lower body would only split when the waist is straight. If they could’ve put the waist swivel with that and it not be a mess, the figure would’ve been awesome
Glad to get a review from a star Saber fan (I used to have both MP bots too) because I feel a lot of reviewers are mostly completion based and don't talk about why the figure is fun. I think the cost is fine too...I paid 160 to import both Big Powered and Ginrai sets and the quality of this set is way better.
I'm hoping that because Deathsaurus doesn't need to fit as many gimmicks, they can focus more on QC stuff and minimizing little problems like the ankle joints
Bruh Imagine a LegEVO Star saber with Ginrai as a Headmaster, since Ginrai (PM Optimus) BECAME VICTORY LEO (I know, confusing) and Victory Leo as a weaponizer!
It's unfortunate that a lot of them have QC issues, but it's also nice that most of them seem to be fixable with some thickening of some pegs. Mine has the same QC as yours plus a few more, but despite the issues I still have just as much fun with it.
My Victory Saber has damaged gold pieces on both Star Saber and Victory Leo as well as the minicons not being able to stay together, sucks to see its so widespread
*Yo shoutout to the Siege Micromaster “repaints” in this 170USD toy* In all honesty they look awesome and I REALLY want them to release both them AND Leo in legacy
I'm really glad I backed this, the play value of the set is fantastic and it looks amazing too. Fire doesn't tab together well but that's understandable when he's just a retool of Topshot. TINY paint scuff on the shoulder. I'm glad the set showed up before the Deathsaurus cutoff because I wasn't going to back him unless I was satisfied with Victory Saber. EDIT: trimmed some flash from Fire's leg, works just fine now
@@XelhosTallyn Me too brother. You do what you want with what you pay for. I plan on panel-lining my Victory Saber up. It is a great time to be a Transformers fan!
I may be speaking like a poor person, but I wish they released a normal version without Victory Leo at retail so people who missed out, or can't access Haslab have an option. I live somewhere where HasLab is just not an option for me.
Given the after market prices, I ended up getting Planet X ver.Not quite the same, as it based on the IDW ver of the character, but still a nice figure and fill that Star Saber hole in my collection.
I see people complain about no landing gear... I build Gundams that I then paint and have a rubber mat and a felt pad on the shelf so that's not an issue for me I highly recommend getting felt for displaying figures
Just got mine in the mail. Package was busted on the corner, but not too miffed about it as I am more excited about the toy inside than the packaging. Very happy with this figure, little scratches on the chrome but not other qc issues. The top of Star Saber's flight mode is underwhelming deco wise, probably my largest gripe with the figure. I wish each figure came with a #/26000 on them, just to make them feel a little bit more special but that'd just be gravy at this point. Overall, glad this figure came out at all. Although I understand the controversy behind crowdfunded toys (especially in the current economic crisis), I think Haslab has some possibilities left in it though I can't think of any good ideas off the top of my head.
Great review! I am glad I was able to back Victory Saber and Deathsaurus as well. That was a bro move on Hasbro's part to be able to get this Victory Saber out and in people's hands before the end of the Deathsaurus Haslab. Too bad about the gaps and screw holes though, I mean this is a Haslab after all. I really hope someone like ToyHax makes some gap and screw-hole covers. I plan on panel lining mine up to really celebrate that Gundam aesthetic. Keep up the great work!
Anyone else first think of the black lion from Voltron after seeing Victory Leo's lion form. Also a solution I think would be cool for the screw holes is to make them 5mm ports as well so they are actually used and aren't just an eye sore. lastly Victory Sabre is going for 180.00 dollars on Hasbro pulse at the moment
The hatch on mine, on the legs of the combined mode don't latch when in ship mode anyone got a fix since Hasbro still hasn't gotten back to me yet...... His in the video seems to have the same problem as seen at 14:37 the hatch that the knee foldes into dosnt close or if you try to push it it bows alot
If I'm not mistaken thew said something about the guy who worked on this also worked on Gundam so yeah and that's why the design of victory saver in general looks like a Gundam which it's cool to see like it's like its own type of crossover without even trying
Wish that Star-Saber was a Legacy release at a commander price point so people who didnt get Victory Saber by the funding and get a reasonable price point other than this price point from funding.
Wish I had this guy. Even an older figure if posible. He's like the love child of gundam and transformers. Would be cool and also very ironic to release a core class of star saber which just simply turn from robot some weak jet so they don't have to incorporate everything.
I’m now going to learn about this character because he looks amazing. His full on alt mode, not with Leo, reminds me of Ultra Magnus’s ship from Transformers Prime
How to improve the Micromasters: Repaint the red one to be a candy cane Repaint the white one in that fortnite (shut up let me like my game with it’s toxic fanbase) Minty Sky-Blue/Dark-Blue/Neon-Green color scheme Why? Holli and Jolli!
I lost one of the tusks on my Victory Leo cause it popped off. Called hasbro pulse, was on hold for less than 3 minutes, and they are sending me an entirely new victory leo figure free of charge. Super good customer service in my opinion, if you have any issues with your copies i wouldn't panic, just give hasbropulse a call they are really understanding
With the amount of material and parts count on this guy, there's no way this would've been a mainline release. Hasbro didn't even know western audiences would even be interested in TF: Victory, so they were cautious in making this a made-to-order project. Due to its success, we're getting a mainline Galaxy Shuttle and a HasLab Deathsaurus that unlocked its final tier yesterday. Perhaps we'll get more guys like Road Caesar and Liokaiser down the line.
@@x_Star.Saber_x fair point, I mean they could sold star saber alone as a commander class but I do understand their caution, but I’d love to see more victory characters have main line releases
I really wish this was a retail release, even if it was at commander price without Victory Leo, the stand, etc. I know the Japanese shows were a bit more obscure, but this isn't some random character, this is a faction leader, and I'm pretty sure more people know who Starsaber is than characters from Masterforce, which was also a Japanese only show, like Minerva, or a G2 Comics exclusive character like Jiaxus. We're getting Diaclone repaints as retail releases, but a faction leader is an online exclusive?
Got this guy today, and unfortunately got a QC issue where one of the tab holes for the sword hilt in jet mode was literally sealed shut, but apart from that this dude is a blast to mess with!
LG-EX Grand Maximus had under 3 thousand made and no qc issues. The figure was double retail. The qc got cut back on to make even more money. I got a hair under the foil stamp and the foil stamp has been damaged there is paint splashes all over the place. We all paid alot and I mean alot for that figure and at that cost the quality should of been spot on. This mold was designed back in potp days leaving Thunderwing as the only fan vote we have not gotten. In total they got how much money and they skimped with the better qc that might of been the difference of 5 to 10 grand overall or about 50 cents more per figure at most.
I'm in Australia, and instead of buying it from a local retailer like I did with Unicron, or using a local community like Ozformers which helps people get foreign exclusives, I got him directly from Pulse and got him sent to a parcel-forwarding service. The shipping, is, frankly, INSANE. I'm dreading the prospect of getting one with QC issues, as even if Hasbro replaces it, the cost to actually get those replacement parts out to me is... not gonna be cheap. ;_; It's too late for Deathsaurus, but for next year's Haslab, I'd definitely advise that people get them local.
As it stands I’ll probably just get the Planet X Star Saber and Victory Leo, given that it will be a better deal given if arguably cheaper than the Haslab, 300 for the Planet X bois, 300-350 for the average HasLab Saber if you’re lucky, since I love both the IDW and G1 designs. Also I like the scale between the Planet X figures with each other, and with the eventual Deathsaurus.
I actually managed to sell the Micromasters and the box sleeve along with the tray cover. So I at least got some money back on this set. I really just wanted Star Saber and Victory Leo.
Would it be possible for you to scan all of the inserts? I don't know if there's any versions already online but the artwork is fantastic and it would be wonderful to get the chance to have them printed into a full poster. Thank you. Wonderful content.
The more I think about this the more I realize how bad of a practice haslab truly is. It's basically punishing those who can't back it by never re-releasing it and forcing them to deal with scalpers who will sell it for 300% more
I feel a lot of the budget went into the packaging, paint, accessories, stand and combinations because if I'm being honest, the transformations are probably the weakest point, for me at least. And this is an opinion I have overall of Japanese transformers were I feel like the transformation aspect of the robots was an afterthought and many of them basically follow this template: extend arms, chest and legs, flip out hands, feet and head. Like the vehicle mode clearly looks like the robot lying down with all limbs and head tucked in. I like it when my Transformers look very different across their modes. Probably why Hasbro decided to give this one a go first. They knew they wouldn't have to design very complex transformations and could instead focus on other stuff.
Not sure if you’ll see this, but is the blue handle on the sword supposed to click in or something? Whenever I try to put the sword into his hand, the blue peg pushes back in and I have to pull it out again.
@@ThatToyGuy ah yeah I figured. I’m hesitant to use too much force since I don’t want to break anything. I assume there is a “clicking” sound when it clicks into place right?
I checked mine after watching your video, lucky no scratch on chests, all joints & hinge are tight enough, but still....mine has another defect which mostly others do not have, my set comes WITHOUT THE BLADE! man...
Really enjoying mine. Only issue I've had is with the micromaster but I ain't exactly fussed about them. I think you missed that his shoulders have a double butterfly joint on them I didn't realise at first. They bend in like you showed and then have a second hinge to move out a little. Bit of a shame the arms can't lift up higher. Feels like the side of the shoulder stacks should have hinged up a little to allow for that.
Mine didn’t come with the saber blade but I loved the figure anyway and overlooked it, it’s amazing I have it right now displayed like the back of the box And yes like he said it is absolute HEAVEN to look at
@@jedijack0577 hah, I understand completely. I'm not throwing away the sleeve, but double check the folds of the red cardboard box, apparently many people on tfw2005 have had that issue
@@elijahjarman2837 yeah I’ve already checked and there’s nothing I might just email hasbro for a replacement Even so I’m still VERY happy with the figure and am excited to see what the haslab post Deathsaurus is I’m hoping it’s not too high of a price highest I’d go would be $250
The only major gripes I have are the back legs of victory leo were loose (I tightened them up slightly) and I have not been able to find storage for the blade...
I am so glad I ordered this. I always wanted the original but after market prices killed me on that. The Masterpiece being anything but killed that as well, but this? Great scale and great design work. It's like Hasbro watched your Masterpiece review and fixed all your issues with that. I am so glad I could get this guy.
I had the same issue with Victory Leo’s right leg and was wondering how your are going about fixing it? I’d like to fix it but too scared to try anything yet.
How come you didn't atach the shield to the top of the fully combined mode? I really dont understand why the shield was a tier unlock as that shield once attached in combined mode makes it look more screen accurate. Baffles me why they did that because if it didnt unlock i think it would have looked weird
I've seen some eBay prices that aren't as bad. They're bad, but not $500 bad. So I'm gonna wait till I get a paycheck and hopefully grab one that's $300 or less.
what you call mini poof, star saber actually did that in a few episodes. i'm only up to episode 8 at the moment but i was actually suprised to see the small head being out while he was in combined mode in the anime
I think I'll wait a few months until people begin to separate/break their star sabers and victory leos, I'm hoping to snag star saber on his own some day!
First off best review of this guy I've seen. I'm super jellies wish I could've talked my wife into this but I did manage to get Menasor out of her lol just waiting on Breakdown now.
2:58 broOoo! My Saber has the nose painted on the sides and bottom! It actually looks like a visor! (It might be just a little detail, but it just looks way better); I just noticed that while re-watching your review! 😵💫 QC grrrrr....😢
I hate haslab, nothing more than overpriced toys designed to collect interest from up front payments and maximize the FOMO. All this has done is tell Hasbro they can keep charging ludicrous prices for stuff we want. They said themselves that we would have gotten Deathsaurus in the mainline if Victory Saber hadn't done so well. Meaning we could have gotten him for half the price and most of what the haslab does minus the extras and not be forced in a limited time to decide whether we want him or not. I think Victory Saber did not justify the price but Deathsaurus is even worse. At least Saber came with a few figures in the box Deathsaurus is just a commander with 2 cassettes. And it's going to get even worse since Hasbro has been told we are fine with that too.
Deathsaurus would have been a leader, not Commander and you would have had to buy breast animals separate as core class releases. Yeah, it'd be half the price, but it'd also be less than half the quality
I can't stand this thought that if things don't sell well they'll make things cheaper, I got news for you buddy, if things don't sell well they stop selling them altogether not make them cheaper, you can think you're some warrior for fair prices, but you just look like a whiny baby
I feel like almost ever review I’ve seen of this figure have found some issue which is sort of disappointed for a product like this. My biggest issues were excess paint spots and a big paint-scratch on the leg. And then one of the actual hole cut outs for the flaps of the landing gear is completely lopsided.
Got mine today… I love him so much !! But I did get one QC defect… so where the nose cone tabs in the saber jet mode one of the tab is filled with a wall of plastic that prevents the tan goin in. Now I have contacted hasbro but I’ve heard a few other copies have the same problem so I might either file it out or get a replacement saber.
Victory Saber is a good release but it is a shame that multiple units had QC issues, lucky that Hasbro are sending replacement parts out to customers though.
I'm honestly waiting for a mass produced haslab in a box like they did with Unicron and it'll just be inner peace.
I didn’t know they were sending out replacements, that’s super good to hear for people that had issues
Is there a link or email I can hit up for that?
Ya I called about it they said they had replacements.
It would’ve been cool if victory Leo was designed where his lower body would only split when the waist is straight. If they could’ve put the waist swivel with that and it not be a mess, the figure would’ve been awesome
Something like cybertron metroplex? Where his saw can split but also spin
Glad to get a review from a star Saber fan (I used to have both MP bots too) because I feel a lot of reviewers are mostly completion based and don't talk about why the figure is fun. I think the cost is fine too...I paid 160 to import both Big Powered and Ginrai sets and the quality of this set is way better.
oh yea...I kinda didn't like trying to manipulate the MP.... this guy is way more fun.
I got the LG ex version and no issues. Star Saber is riddled with qc issues.
I'm hoping that because Deathsaurus doesn't need to fit as many gimmicks, they can focus more on QC stuff and minimizing little problems like the ankle joints
Bruh
Imagine a LegEVO Star saber with Ginrai as a Headmaster, since Ginrai (PM Optimus) BECAME VICTORY LEO (I know, confusing) and Victory Leo as a weaponizer!
It's unfortunate that a lot of them have QC issues, but it's also nice that most of them seem to be fixable with some thickening of some pegs. Mine has the same QC as yours plus a few more, but despite the issues I still have just as much fun with it.
He seems to be flooded with bad QC for a lot of people.
I’ve seen reviews that prove you are right. The mini cons are literally falling apart.
I think it's due to the shipping controls. 💀
My Victory Saber has damaged gold pieces on both Star Saber and Victory Leo as well as the minicons not being able to stay together, sucks to see its so widespread
Yeah my saber figure for some reason has a stress mark on the neck joint.
*Yo shoutout to the Siege Micromaster “repaints” in this 170USD toy*
In all honesty they look awesome and I REALLY want them to release both them AND Leo in legacy
I'm really glad I backed this, the play value of the set is fantastic and it looks amazing too. Fire doesn't tab together well but that's understandable when he's just a retool of Topshot. TINY paint scuff on the shoulder. I'm glad the set showed up before the Deathsaurus cutoff because I wasn't going to back him unless I was satisfied with Victory Saber.
EDIT: trimmed some flash from Fire's leg, works just fine now
U playing with those?
@@Stribog1337 I mean, yeah? I didn't buy it just to look at the box lol
@@XelhosTallyn Me too brother. You do what you want with what you pay for. I plan on panel-lining my Victory Saber up. It is a great time to be a Transformers fan!
Fun fact: my star saber actually came without the blade for the sword, I have a star saberless now
contact hasbro. Supposedly they've been replacing parts.
That's really rough, hopefully you can get that fixed
Victory ***** (place holder)
I may be speaking like a poor person, but I wish they released a normal version without Victory Leo at retail so people who missed out, or can't access Haslab have an option. I live somewhere where HasLab is just not an option for me.
Given the after market prices, I ended up getting Planet X ver.Not quite the same, as it based on the IDW ver of the character, but still a nice figure and fill that Star Saber hole in my collection.
I see people complain about no landing gear... I build Gundams that I then paint and have a rubber mat and a felt pad on the shelf so that's not an issue for me I highly recommend getting felt for displaying figures
Just got mine in the mail. Package was busted on the corner, but not too miffed about it as I am more excited about the toy inside than the packaging. Very happy with this figure, little scratches on the chrome but not other qc issues. The top of Star Saber's flight mode is underwhelming deco wise, probably my largest gripe with the figure. I wish each figure came with a #/26000 on them, just to make them feel a little bit more special but that'd just be gravy at this point. Overall, glad this figure came out at all. Although I understand the controversy behind crowdfunded toys (especially in the current economic crisis), I think Haslab has some possibilities left in it though I can't think of any good ideas off the top of my head.
Great review! I am glad I was able to back Victory Saber and Deathsaurus as well. That was a bro move on Hasbro's part to be able to get this Victory Saber out and in people's hands before the end of the Deathsaurus Haslab. Too bad about the gaps and screw holes though, I mean this is a Haslab after all. I really hope someone like ToyHax makes some gap and screw-hole covers. I plan on panel lining mine up to really celebrate that Gundam aesthetic. Keep up the great work!
Anyone else first think of the black lion from Voltron after seeing Victory Leo's lion form. Also a solution I think would be cool for the screw holes is to make them 5mm ports as well so they are actually used and aren't just an eye sore. lastly Victory Sabre is going for 180.00 dollars on Hasbro pulse at the moment
Did Hasbro put out extra stock or returns because didn't the Victory Saber Haslab end a while ago? If they did, people would be smart to jump on that.
Star saber was a holy grail for me as a kid, so seeing this great set come out makes me so happy
The hatch on mine, on the legs of the combined mode don't latch when in ship mode anyone got a fix since Hasbro still hasn't gotten back to me yet...... His in the video seems to have the same problem as seen at 14:37 the hatch that the knee foldes into dosnt close or if you try to push it it bows alot
If I'm not mistaken thew said something about the guy who worked on this also worked on Gundam so yeah and that's why the design of victory saver in general looks like a Gundam which it's cool to see like it's like its own type of crossover without even trying
I have to say I really enjoyed your review. I usually catch Thew, Freakin Geek, or Prime vs Prime. I just found my VS yesterday for $200. So stoked
5:57 This is intentionally funny💀
@6:02... I got a good chuckle. chaotically organized, my friend.
I’m not an adult collector but I’ve been collecting for 9 years and all I know is I need that figure
8:50 he looks like Sky Lynx's alt mode in Combiner wars.
Wish that Star-Saber was a Legacy release at a commander price point so people who didnt get Victory Saber by the funding and get a reasonable price point other than this price point from funding.
and i wish i had a million dollars, aint happening
Epic review That Toy Guy!! I hope I will be able to get Victory Saber one day. Keep on being amazing.
Wish I had this guy. Even an older figure if posible. He's like the love child of gundam and transformers. Would be cool and also very ironic to release a core class of star saber which just simply turn from robot some weak jet so they don't have to incorporate everything.
ill sell you my masterpiece if you want
@@beepbeeplettuce5890 Are you from an EU country?
Sooooo given how much you like Star Saber… Where’s the HasLab vs MP comparison? I feel both sets have pros and cons. I’m curious which way you’d go.
I’m now going to learn about this character because he looks amazing. His full on alt mode, not with Leo, reminds me of Ultra Magnus’s ship from Transformers Prime
How to improve the Micromasters:
Repaint the red one to be a candy cane
Repaint the white one in that fortnite (shut up let me like my game with it’s toxic fanbase) Minty Sky-Blue/Dark-Blue/Neon-Green color scheme
Why?
Holli and Jolli!
I lost one of the tusks on my Victory Leo cause it popped off. Called hasbro pulse, was on hold for less than 3 minutes, and they are sending me an entirely new victory leo figure free of charge. Super good customer service in my opinion, if you have any issues with your copies i wouldn't panic, just give hasbropulse a call they are really understanding
Should’ve been a mainline release imo 🤷🏼♂️
With the amount of material and parts count on this guy, there's no way this would've been a mainline release. Hasbro didn't even know western audiences would even be interested in TF: Victory, so they were cautious in making this a made-to-order project. Due to its success, we're getting a mainline Galaxy Shuttle and a HasLab Deathsaurus that unlocked its final tier yesterday. Perhaps we'll get more guys like Road Caesar and Liokaiser down the line.
@@x_Star.Saber_x fair point, I mean they could sold star saber alone as a commander class but I do understand their caution, but I’d love to see more victory characters have main line releases
Yeah I have to agree, I wish more effort was given or corners hadn’t been cut. Deathsaurus seems to have been a drastic improvement
@@x_Star.Saber_x That’s BS. They can do market research. They can run algorithms to predict what people will buy.
@@VAULT-TEC_INC. The HasLab release WAS the market research, wise guy.
I really wish this was a retail release, even if it was at commander price without Victory Leo, the stand, etc. I know the Japanese shows were a bit more obscure, but this isn't some random character, this is a faction leader, and I'm pretty sure more people know who Starsaber is than characters from Masterforce, which was also a Japanese only show, like Minerva, or a G2 Comics exclusive character like Jiaxus.
We're getting Diaclone repaints as retail releases, but a faction leader is an online exclusive?
They're probably not confident JG1 will do well over here.
@@_V.Va_ So they release a character from Beast Wars 2, a character from Masterforce, and a character from G2 at retail?
@@josiaharaki7310 Their ways truly are mysterious.
Meanwhile 2024 gives us Magmatron.
OMG that George Fisher neck on Star Saber... XD The dude headbangs.
I managed to SOMEHOW get my hands on a copy, and I LOVE IT
Got this guy today, and unfortunately got a QC issue where one of the tab holes for the sword hilt in jet mode was literally sealed shut, but apart from that this dude is a blast to mess with!
16:00 you can untap Victory Leo's half of the "foot form", and NOW you have a lot of ankle movement for posing, when he's attached to Star Saber 🎉
LG-EX Grand Maximus had under 3 thousand made and no qc issues. The figure was double retail. The qc got cut back on to make even more money. I got a hair under the foil stamp and the foil stamp has been damaged there is paint splashes all over the place. We all paid alot and I mean alot for that figure and at that cost the quality should of been spot on. This mold was designed back in potp days leaving Thunderwing as the only fan vote we have not gotten. In total they got how much money and they skimped with the better qc that might of been the difference of 5 to 10 grand overall or about 50 cents more per figure at most.
Sadly, my broke ass is only worth like five cents and yet I adore this so much
I'm in Australia, and instead of buying it from a local retailer like I did with Unicron, or using a local community like Ozformers which helps people get foreign exclusives, I got him directly from Pulse and got him sent to a parcel-forwarding service. The shipping, is, frankly, INSANE. I'm dreading the prospect of getting one with QC issues, as even if Hasbro replaces it, the cost to actually get those replacement parts out to me is... not gonna be cheap. ;_;
It's too late for Deathsaurus, but for next year's Haslab, I'd definitely advise that people get them local.
I’ve waited an eternity for this…
I totally did not know about the Scabbard in the Legs of Victory Saber. Thanks for pointing that out
As it stands I’ll probably just get the Planet X Star Saber and Victory Leo, given that it will be a better deal given if arguably cheaper than the Haslab, 300 for the Planet X bois, 300-350 for the average HasLab Saber if you’re lucky, since I love both the IDW and G1 designs. Also I like the scale between the Planet X figures with each other, and with the eventual Deathsaurus.
This could have been Split into 2 Mainline Releases.
As someone who has one, no
@PunchCounterpunch_Lizzy i have one too, 300 is too much
@@nicklegostava that’s understandable but they could not do this as a mainline release there’s too much these have to do, to do all the modes
@PunchCounterpunch_Lizzy could have been a leader & commander
I actually managed to sell the Micromasters and the box sleeve along with the tray cover.
So I at least got some money back on this set.
I really just wanted Star Saber and Victory Leo.
Star Saber, the greatest swordsman in the galaxy. Shame that Cyclonus never got the memo in the comic.
WE SHALL NOT MENTION IDW STAR SABER
Would it be possible for you to scan all of the inserts? I don't know if there's any versions already online but the artwork is fantastic and it would be wonderful to get the chance to have them printed into a full poster. Thank you. Wonderful content.
The thing about this set is I can’t be mad at anything nitpicks cause I’m holding a victory saber for the first time ever
The more I think about this the more I realize how bad of a practice haslab truly is. It's basically punishing those who can't back it by never re-releasing it and forcing them to deal with scalpers who will sell it for 300% more
With this and now Deathsaurus I sincerely hope Hasbro isn't exiling Japanese canon to Haslab (for the first time).
If it means we get more victory characters, i hope they are
I feel a lot of the budget went into the packaging, paint, accessories, stand and combinations because if I'm being honest, the transformations are probably the weakest point, for me at least. And this is an opinion I have overall of Japanese transformers were I feel like the transformation aspect of the robots was an afterthought and many of them basically follow this template: extend arms, chest and legs, flip out hands, feet and head. Like the vehicle mode clearly looks like the robot lying down with all limbs and head tucked in. I like it when my Transformers look very different across their modes.
Probably why Hasbro decided to give this one a go first. They knew they wouldn't have to design very complex transformations and could instead focus on other stuff.
I hope every copy yellows. Is it because I’m jealous? YES!
Beta.
@@_V.Va_ YES!
Not sure if you’ll see this, but is the blue handle on the sword supposed to click in or something? Whenever I try to put the sword into his hand, the blue peg pushes back in and I have to pull it out again.
Yes. You have to pull hard on the handle but it clicks in place. Took me a bit to discover that
@@ThatToyGuy ah yeah I figured. I’m hesitant to use too much force since I don’t want to break anything. I assume there is a “clicking” sound when it clicks into place right?
Yeah it makes a sound. It's not a loud click but you'll feel it
@@ThatToyGuy alright. I guess it must take a lot of force.
Great to see the G1 in your video. I have Victory Saber G1, and i am waiting to receive this legacy version.
I checked mine after watching your video, lucky no scratch on chests, all joints & hinge are tight enough, but still....mine has another defect which mostly others do not have, my set comes WITHOUT THE BLADE! man...
you're in premium transformers when the box transforms
I’m so mad I missed both this and Deathaurus because they look so good
Really enjoying mine. Only issue I've had is with the micromaster but I ain't exactly fussed about them. I think you missed that his shoulders have a double butterfly joint on them I didn't realise at first. They bend in like you showed and then have a second hinge to move out a little. Bit of a shame the arms can't lift up higher. Feels like the side of the shoulder stacks should have hinged up a little to allow for that.
It would be cool if they did another run of this.
He also has REVERSE BUTTERFLY on a separate joint! I haven't been able to engage mine yet because it's tight but yeah!
With the ankles on the big one it reminds me of my copy of the Sweep from SS '86
Mine didn’t come with the saber blade but I loved the figure anyway and overlooked it, it’s amazing I have it right now displayed like the back of the box
And yes like he said it is absolute HEAVEN to look at
Hey, have you thrown out the packaging? Theres a small chance the blade fell into the box
@@elijahjarman2837 No that box is a master piece I would never you think I’d throw away Guido Guidi’s amazing work
In all seriousness I didn’t
@@jedijack0577 hah, I understand completely. I'm not throwing away the sleeve, but double check the folds of the red cardboard box, apparently many people on tfw2005 have had that issue
@@elijahjarman2837 yeah I’ve already checked and there’s nothing I might just email hasbro for a replacement
Even so I’m still VERY happy with the figure and am excited to see what the haslab post Deathsaurus is
I’m hoping it’s not too high of a price highest I’d go would be $250
@@jedijack0577 I'm sorry it wasn't there...
I wanted to back deathsaurus, but sadly, gotta save that moolah lol
Hope it goes better for ya!
The only major gripes I have are the back legs of victory leo were loose (I tightened them up slightly) and I have not been able to find storage for the blade...
Blade goes in star sabers leg. I show it off/mention it in the video
@@ThatToyGuy thanks, I feel like an idiot after watching it lol
Great input on him
What do you use to thicken up tabs? Whats the process?
I'm curious too.
super glue or floor polish are the most common, but there are a few people who make a special liquid for tightening joints on eBay and the like
Cum.
I am so glad I ordered this. I always wanted the original but after market prices killed me on that. The Masterpiece being anything but killed that as well, but this? Great scale and great design work. It's like Hasbro watched your Masterpiece review and fixed all your issues with that. I am so glad I could get this guy.
I had the same issue with Victory Leo’s right leg and was wondering how your are going about fixing it? I’d like to fix it but too scared to try anything yet.
pulse told me it shipped one whole day before it got here. glad i wasn't caught completely unaware.
My only problem with this set, is it's now REALLY making me wish I still had my vintage Victory Saber set!!
How come you didn't atach the shield to the top of the fully combined mode? I really dont understand why the shield was a tier unlock as that shield once attached in combined mode makes it look more screen accurate. Baffles me why they did that because if it didnt unlock i think it would have looked weird
I got so desperate after the Star Saber campaign ended, I spent $420 to get one off of eBay and should be at my house within the week
Same, I feel your pain bro
@@beepbeeplettuce5890 we shall go down in style, Japanese style
The KFC victory Leo has a waist swivel...
The ab-crunch is needed
A big guy like him should be able to see his friends
Yeah. Anyone who says an ab-crunch is unnecessary when it's there is an absolute tweaker.
It is good relative to its price. This isn't premium, it's just an expensive CHUG set. It seems to have a higher proportion of QC misses.
I think they could’ve changed the engineering to make the neck less prominent but everything else looks great.
16:28 which movie is that Optimus Prime from?
I've seen some eBay prices that aren't as bad. They're bad, but not $500 bad. So I'm gonna wait till I get a paycheck and hopefully grab one that's $300 or less.
What's your favorite transformer show?
what you call mini poof, star saber actually did that in a few episodes. i'm only up to episode 8 at the moment but i was actually suprised to see the small head being out while he was in combined mode in the anime
Cannon pooth
I think I'll wait a few months until people begin to separate/break their star sabers and victory leos, I'm hoping to snag star saber on his own some day!
First off best review of this guy I've seen. I'm super jellies wish I could've talked my wife into this but I did manage to get Menasor out of her lol just waiting on Breakdown now.
I really up with the release of this and some of the Cybertron Trilogy based figures we will get some more Super Robo era-styled of combiners.
So, wait they send replacement parts? So would it be possible to get a new back for saber to replace the one that has the filled in gap?
Man I can't wait deathsaurus
2:58 broOoo! My Saber has the nose painted on the sides and bottom! It actually looks like a visor! (It might be just a little detail, but it just looks way better); I just noticed that while re-watching your review! 😵💫
QC grrrrr....😢
Is there a way to fix this issue with Victory Leo's Leg in robot mode??
I have a shipping number as soon as they started pumping them out so idk how people haven't gotten emails
I hate haslab, nothing more than overpriced toys designed to collect interest from up front payments and maximize the FOMO. All this has done is tell Hasbro they can keep charging ludicrous prices for stuff we want. They said themselves that we would have gotten Deathsaurus in the mainline if Victory Saber hadn't done so well. Meaning we could have gotten him for half the price and most of what the haslab does minus the extras and not be forced in a limited time to decide whether we want him or not. I think Victory Saber did not justify the price but Deathsaurus is even worse. At least Saber came with a few figures in the box Deathsaurus is just a commander with 2 cassettes. And it's going to get even worse since Hasbro has been told we are fine with that too.
Deathsaurus would have been a leader, not Commander and you would have had to buy breast animals separate as core class releases. Yeah, it'd be half the price, but it'd also be less than half the quality
I can't stand this thought that if things don't sell well they'll make things cheaper, I got news for you buddy, if things don't sell well they stop selling them altogether not make them cheaper, you can think you're some warrior for fair prices, but you just look like a whiny baby
Great for the original funding price or ebay aftermarket prices?
I seriously wish I got him, I am going to do the ultimate hunt for this thing
Definitely a great legacy figure, not worth a premium figure though
i accidently thought that was a gundam model
@@angusmcnay5449 we all know this
Really wish and feel like this set would have been could have been should have been two separate mainline releases
I'm scared that in the future Is going to become yellow
"unpaintable plastic" my ass, I used paint markers I bought from Amazon, and I'm gonna keep an eye on it to see if the wings start paint chipping.
I feel like almost ever review I’ve seen of this figure have found some issue which is sort of disappointed for a product like this. My biggest issues were excess paint spots and a big paint-scratch on the leg. And then one of the actual hole cut outs for the flaps of the landing gear is completely lopsided.
Got mine today… I love him so much !! But I did get one QC defect… so where the nose cone tabs in the saber jet mode one of the tab is filled with a wall of plastic that prevents the tan goin in. Now I have contacted hasbro but I’ve heard a few other copies have the same problem so I might either file it out or get a replacement saber.
I love my copy of this guy, has some slight imperfections. But absolutely amazing other than the issues
"Here are some poses the masterpiece would only DREAM! Of doing" ...Man the masterpiece sure has to suck if it can't do even that boring bare minimum
Are you able to remove the brain master for more head articulation?
No its the same whether or not the brain master is in
surprised you didn't attach the shield in the combined jet mode with Victory Leo.