As a reinforcing ironworker, the guy who is installing this type of stuff, it's very nice to hear that you noticed the clearance issues found when trying to place certain details. It seems too often that these considerations like fitting the beam steel into the column are overlooked
Majid, I've been looking for rebar pluging for standard bend shapes and have not found any luck ether, anyway not too much civil and structural plugins out there. I'm looking to make lift drawings/bend schedules using sketchup. I think Dynamic components (DC) might be the way to go to get started. then I'd make my own Ruby script as one advance. I'm trying to find documentation on (DC) attributes such has, can a get the bend length for the stirrup etc
soo nice work congrats. . please can you ( if it's possible) to provide us more detail about the software.. I mean the version and the used table tools used within... again very nice work ...
your sketch is awesome,it was helpful. but at end of beam which is connected to the exterior column, the bottom bars should have extension (it should calculated by development length formula and provision of anchored) and to be bent or anchored upward, and also, at the middle of beam, the top bars should connected by 12 mm DIA for holding tied stirrup bars. and the distance between top bars is seems to closed and not adequate for size aggregates.any way its only sketch and it might be not clear to see through video. thanks ...
really nice good work matey,i am trying to extend a concrete floor 4 metres outside the edge of the cliff got a river down bellow,,as i got no much land ,also i can't use pillars it is too high,all i want to do now put lots of iron bars extend them to 3 to 4 mts outside and hook them at the bottom of the house for more strengh,any idea would be grateful.
As a reinforcing ironworker, the guy who is installing this type of stuff, it's very nice to hear that you noticed the clearance issues found when trying to place certain details. It seems too often that these considerations like fitting the beam steel into the column are overlooked
How do I contact you for a project I'm working on ?
Great video!! Enjoyed thoroughly and I must say all the instructions has been added with enormous accuracy. Keep it up...
Thank you it actually improves a beginner's vision. we do need more of these videos on TH-cam 👍
Thanks!
great detailing. you must have spent a lot of time figuring out the plug-ins to get them done.
Did you install add-ins, extensions or additional software beside SketchUp to build this?
Absolut coole Darstellung! Für viele Eisenbinder am Bau ein Traum .
12 year back wow
Yup, old school! :)
Thank you for this tutorial video!
hello great video...can you please tell me where did you find the fillet tool plugin...I have been searching all over and cant seem to find it
The plugin name for the filleting is "Bezier Spline"
Great video, is there any plugin for reinforced steel structures?
Majid, I've been looking for rebar pluging for standard bend shapes and have not found any luck ether, anyway not too much civil and structural plugins out there. I'm looking to make lift drawings/bend schedules using sketchup. I think Dynamic components (DC) might be the way to go to get started. then I'd make my own Ruby script as one advance. I'm trying to find documentation on (DC) attributes such has, can a get the bend length for the stirrup etc
Thanks. Nice work!
thankc
soo nice work congrats. . please can you ( if it's possible) to provide us more detail about the software.. I mean the version and the used table tools used within... again very nice work ...
how did you make the "fillet" button
I don't have such a button!
Very nice!!! Can you help me with above command i could not found it in warehouse.
what extensions are u using for your rebars?
What the fillet tool you used?
your sketch is awesome,it was helpful.
but at end of beam which is connected to the exterior column, the bottom bars should have extension (it should calculated by development length formula and provision of anchored) and to be bent or anchored upward,
and also, at the middle of beam, the top bars should connected by 12 mm DIA for holding tied stirrup bars.
and the distance between top bars is seems to closed and not adequate for size aggregates.any way its only sketch and it might be not clear to see through video.
thanks ...
+Kamal sahidaini Thanks! The video is more to demonstrate how to draw bars and not a reinforced beam design.
awsmmm video
really nice good work matey,i am trying to extend a concrete floor 4 metres outside the edge of the cliff got a river down bellow,,as i got no much land ,also i can't use pillars it is too high,all i want to do now put lots of iron bars extend them to 3 to 4 mts outside and hook them at the bottom of the house for more strengh,any idea would be grateful.
can you show the details of you whole models thanks
have you made any rebar into dynamic components to create a rebar bend schedule
why is the column bars only on the lower row in extension beyond pillars?
better make a leg of stirrups bend at 45 deg rather than 90 deg.
where can i find these tools , it is not integrated with sketchup
thanks sir
i learnt alot
very good. thanks for sharing
Please can i get 2015 plugins?
how can i add fillet to my sketchup?
+Nor Zian check out sketchucation.com. They have tons of plugins that can do that fast.
can i know what are your plug ins??
+john paul pangan email me johnpaulpangan14@gmail.com
subscribed
+Life is Awesome Architecture Entertainment civil thanks!
Today saw my own comment
can u give us the links to take fillets and wield plugins? thanks, man
+Sales Sou hi! Join sketchucation.com (Free) they have tons of free plugins!
@@TallBridgeguy what name of fillet plugin?
what is the software name ?
+arun thakur Hi thanks, the software is Sketchup
what version? I have sketchup pro 2016 but doesnt have many tools like yours
arun thakur good
what sketchup version is this please?
+Ms Savage this was Sketchup 8. Now 2017 is available.
Thanks for tutorial
Thank you .
what is the software name? where can i get it?
Trimble Sketchup. There is a free version.
¿como se lama el plugin?
a big help if i can find this at sketch up 3d warehouse,.pls,.share,.thanks,.
friend as plugins called and where can I download chili and I am very interested in the topic
thanks for sharing
Thanks for stopping by!
Ji
muy buena
Thanks!
waste of time doing this.allplan architecture or archicad does it best
th-cam.com/video/j2qbe-l4yWs/w-d-xo.html