IH Farmall 140 Tractor Oil Change w/Spin-On Filter

[@kevinwallace4751]

Tom, I appreciate you changing the oil in my 140 for me. Now if you can just bring it on down to Alabama that'd be great! Lol

[@tommys_trucks_trains_tractors]

Lol. I had to read it twice because I thought you told me you had a 240, then I realized you wanted this one🤣

[@kevinwallace4751]

You are right. I do have a 240. And yes, I want your 140 lol

[@FarmallFanatic]

You got a lot of EXISTENT buckets 🪣

[@tommys_trucks_trains_tractors]

I acquired a ton for maple sap and apple cider

[@markhornaday-ro3dy]

Thanks for your video, thank for showing me where you add oil engine oil I also have 1973 international good videos

[@tommys_trucks_trains_tractors]

Thank You for watching. It’s an unlikely place isn’t it?

[@MarkWYoung-ky4uc]

I was wondering what year they went to the spin on filter. My 63 has the cartridge type filter which is probably the same one your Super C and 200 has. When loosening the bolt that holds the oil filter case in place, I usually unhook the rod with the spring from the rockshaft arm and swing it forward out of the way.

[@tommys_trucks_trains_tractors]

My brother’s 140 is a ‘67 or ‘68 and it has a cartridge, just like the Super C. I’ve got to adjust something on my side dresser. It doesn’t shut off the chain. I think the spring might be weak?

[@MarkWYoung-ky4uc]

@@tommys_trucks_trains_tractors Possibly or it could be in the linkage that engages the drive cogs when you lower the right hand lift lever. Go around to the left side of the tractor and check these cogs while working the front lift lever. They should disengage when the front life lever is raised.

[@tommys_trucks_trains_tractors]

@@MarkWYoung-ky4uc I’ll do that today. I’m working on the installation video at the moment. Thank You