Simply amazing. Wish y'all had a shop near Indianapolis, I would love to have a brand new cab/bunk interior on my 2003 Intl 9400i Eagle. I've completely rebuilt all mechanical systems and now it's time for cosmetic ie; new interior and a new paint job exterior to make it look brand new again. Actually it would be nice to do away with the 72" Skyrise condo top in favor of a 72" Mid-roof. I found a few like new take-off 72" Mid-roof cabs in excellent condition with full interiors however they were wired for ISX Cummins and not the Series 60 Detroit. I was told the cabs would be of no use to me. I love the work you guys do.
Been driving long enough to remember I used to say "If it aint got a hood I aint drivin' it!" to "If it aint got a full fairing package, I aint drivin' it!" Man what a change in attitude! I seriously wont operate a truck that cant maximize my fuel economy. For some reason the installation of the fairings on this truck made me have that epiphany... Nice job!
Thank you. Its still a lot cheaper than buying a new truck. And on top of that, you're can write off more stuff on your business, besides truck depreciation.
At some point you have to decide the project cost. And ask before you start is it worth it ? Unless your doing the labor yourself . Looks beautiful . we would like to know the final numbers
@@MrCarmelo1959 Because it's not worth paying to have it repaired if you own it. It rarely is. The value of these trucks are all in the warranty. Once the truck is totaled, Freightliner won't warranty it. Wholesale, this truck is worth maybe $60k. But they probably got close to that in it.
Very soothing. My only question is this -- how on Earth do you accomplish this task without taking the valuable time, considerable effort and complex thinking needed to come up with a clever name for the truck? Not an actual question. Great video, thank you for sharing.
I've seen a few truck rebuilds like that, its always amazing to see the finished product in the end but that makes me wonder if these rebuilts are worth the money and the work for the customer. Buying a new truck may cost a lot of money but is a rebuild really a good alternative? You got the same truck in the end with the same (maybe high) mileage. Don't get me wrong i admire that work 😉
Love the work you guy's do, but You guy's must get these Freightliner parts on the cheap, LOL cause sometimes I just don't get it you rebuild a totaled truck. LOL, Don't get me wrong I love watching you all doing this great work. Again another great video.
Looks great. But, do u think the cost of materials and labor to rebuild this salavged truck is worth it rather than purchasing a certified used ? And then doing maintenance on that ?
We've built relationships with dealers, and since we have so many trucks we buy parts for the price that regular people will never buy. We get dealer parts sometimes twice cheaper than Chinese knock off. Used truck with 150k miles will probably be $120-$130k to buy, we build those for under $70k usually (for customers)
I'm on west coast and you looking on wrong places... There's lots cheap places here ID. UT MT WA OR AZ.. COPART around 🇺🇸 cheap buy expensive to tow home good luck
You don’t retitle it. You just get salvage/rebuilt title. Yes, you can’t just swap the vin. You just have to take it to the authorized dealer and he takes care of it. I don’t know what kind of processes they do, but at the end they just put stickers for you on the cab.
Wow wow you guys the crew are awesome incredible work. I could never afford taking my truck to your shop that’s a 2020 Freightliner I got a 97 Freightliner century class it’s held together mainly by duck tape..lol What do you do with these after repaired trucks? Sell them?? You’re there are customers fixing? Whatever don’t care it’s a great job and video kudos to the crew!!!👍👍👏👏👏
Copart doesn't give late model truck away you are paying a premium for the truck & to find a cab that will interchange with a 2020 you or who ever bought that truck paid a premium for truck the cab came off , cost of cab ,some other new &used parts paint labor the cost ????? . Hmmm amazing...
The only reason one would ever do this themself is because the insurance company wouldn't foot the bill and you're stuck making payments on the truck. From uneven tire wear to electrical issues, this truck will always have problems.
@@salvageparadise There is a reason why many buyers steer clear of vehicles which have been in a accident. On top of that, in one video, they showed the guy using a tape measure to measure the squareness of the frame. A tape measure for crying out loud.🤦♂️🤔😟🤫
@@nattydreadlocks1973 I think then you should not buy these trucks from us. Go buy from dealer, that sometimes even asking our shop with our tape measure to fix their frames :)
@@nattydreadlocks1973 Summing all what you said: You used lasers and you still had uneven tire wear. Sounds like the problem is not in tools, but mechanic. We have been doing this for over 10 years now, and yes we fleet our own trucks, and we don't have problems you mentioned. About insurance company, we do work with insurance companies, and never had them call us back because something was wrong. Our customers don't have payments for trucks, neither do we. Why? because we buy these wrecked trucks for cash from insurance companies, and fix them for cash as well, saving sometimes up to $60k. So while you have payments, we make money.
Go to buy a truck like that and they'll tell ya how great it is and everything is brand new now and all, try and trade the same truck in and they'll tell ya it's junk and how a salvage truck isn't worth anything.
karne ke liye Kah Raha Hun sar mera naam Shahrukh hai main India se hun truck mechanic all rounder Tata Diesel truck truck all rounder mechanic engine gear clutch plate Di Bulandshahar welding tyre fitting vagaira all rounder mechanic hun main sar mere liye koi job hai to call back me sir 🇮🇳🇮🇳🚛🚛
Love the time lapse. No talking just doing witn no stupid drama but I can do without the music. I watched it muted. Great job as always.
I still can't believe you got all that work done in 17 minutes wow mind blown 😳😜
I wish I could actually fix trucks this fast lol
You guys are machines!!!
Dam!!! Brand new truck.
Superb workmanship!!!👍
I'd love nothing more than to watch that whole process.
Simply amazing. Wish y'all had a shop near Indianapolis, I would love to have a brand new cab/bunk interior on my 2003 Intl 9400i Eagle. I've completely rebuilt all mechanical systems and now it's time for cosmetic ie; new interior and a new paint job exterior to make it look brand new again. Actually it would be nice to do away with the 72" Skyrise condo top in favor of a 72" Mid-roof. I found a few like new take-off 72" Mid-roof cabs in excellent condition with full interiors however they were wired for ISX Cummins and not the Series 60 Detroit. I was told the cabs would be of no use to me. I love the work you guys do.
Been driving long enough to remember I used to say "If it aint got a hood I aint drivin' it!" to "If it aint got a full fairing package, I aint drivin' it!" Man what a change in attitude! I seriously wont operate a truck that cant maximize my fuel economy. For some reason the installation of the fairings on this truck made me have that epiphany... Nice job!
Very cool how you straighten the frame and then the rear axle. impressive really cool tools to do that.
another happy customer, great job
Hello from Russia! 👍👍👍
Привет нашим!
Awesome job! Even though it looks very pricy project
Thank you. Its still a lot cheaper than buying a new truck. And on top of that, you're can write off more stuff on your business, besides truck depreciation.
How long did it take
@@patrickfulton1264 3 weeks - 1 month
@@salvageparadise how much y’all charge
How much was it?
Outstanding rebuild. Mayor1906! USMC, 1986-90.
))))))Марк, просто ШЕДЕВР!!!!!! Люба глянуть! Круто дружэ!...и музня всегда зачётная!!!!!!!!!!!!!!!!
Музон гавно - работа конфетка! )))
Виталий, вы знаете этих ребят? Нужна помощь в восстановлении трака. Как с ними можно связаться? И где они находятся?
Great job on the video👍🏻
En mi país las reparamos. Saludos Tabasco México 🇲🇽
Saludos desde Washington, en Mexico son mas abendados, mi papa mando armar un Dina con la caseta de un Volvo y motor Navistar, son chingones en Mexico
Amazing work looks very EXPENSIVE i thnk i would have bought a whole new truck
Terrific job and making money on top of money
At some point you have to decide the project cost. And ask before you start is it worth it ? Unless your doing the labor yourself . Looks beautiful . we would like to know the final numbers
Our company has been doing this for more than 10 years now. Most of the time we know what to expect from each type of collision.
How much was that project😁
I guess expensive because no number was given lol
@@MrCarmelo1959 Because it's not worth paying to have it repaired if you own it. It rarely is. The value of these trucks are all in the warranty. Once the truck is totaled, Freightliner won't warranty it. Wholesale, this truck is worth maybe $60k. But they probably got close to that in it.
man that kick bass
Hi wonderfull job
But do you know if a rebuild truck have any restruction in any place to work or problems like high insurance payments ?
Insurance is the same. Never heard from anybody that they couldn’t get a load because their truck had salvage/rebuilt title or something else.
🎵🎵 Ain't nuffin' that a beer can't fix. 🎵🎶🎶
What kind of frame machine y’all using?
Да. Вечно можно смотреть на три вещи: как горит огонь, течет вода и как другой человек работает.)
Son todos unos profesionales los admiro mucho, saludos desde miami FL 🙋♂️
Very soothing. My only question is this -- how on Earth do you accomplish this task without taking the valuable time, considerable effort and complex thinking needed to come up with a clever name for the truck? Not an actual question. Great video, thank you for sharing.
Thank you
Lots of man hours put into this is it really cost effective??
The best in all of America.
The cascadia's travelling a la al barsha 3
How they can do it without machine oil on the floor?. It is impossible in vietnam. Excellent!
I've seen a few truck rebuilds like that, its always amazing to see the finished product in the end but that makes me wonder if these rebuilts are worth the money and the work for the customer. Buying a new truck may cost a lot of money but is a rebuild really a good alternative? You got the same truck in the end with the same (maybe high) mileage. Don't get me wrong i admire that work 😉
Go read the comments below. I answered this question at least 15 times.
Не бит,не крашеный, один хозяин.Без пробега по РФ.
В России был бы «не бит, не крашен» хаха
Great job but how can I find you guys and how much it cast to rebuild it
I would like to shake his hand. Great job!
Do you use them for you’re fleet or sell them? Used to do this with cars before I started trucking business. Nice mix of both!
Both. Yeah, I started with cars too
ㄞ
唉唉唉欸欸欸欸欸欸欸安愛安欸欸ㄞ欸欸欸欸欸欸欸欸欸欸奧欸欸ㄞ
ㄞ奧欸欸欸唉唉唉欸欸欸欸欸欸欸安愛安欸欸愛ㄞ欸欸欸欸欸ㄞ
Love the work you guy's do, but You guy's must get these Freightliner parts on the cheap, LOL cause sometimes I just don't get it you rebuild a totaled truck. LOL, Don't get me wrong I love watching you all doing this great work. Again another great video.
As always great video, very cool to see what you guys do.
Thank you
Great Work! 😍
Отличная работа!!!!
Good job keep up the good work
Thanks
Looks great. But, do u think the cost of materials and labor to rebuild this salavged truck is worth it rather than purchasing a certified used ? And then doing maintenance on that ?
We've built relationships with dealers, and since we have so many trucks we buy parts for the price that regular people will never buy. We get dealer parts sometimes twice cheaper than Chinese knock off. Used truck with 150k miles will probably be $120-$130k to buy, we build those for under $70k usually (for customers)
Vale la pena comprar un.camion así de dañando y gastar en repararlo??
I'd think the "before" truck was destined to be parked in the woods for a deer blind.
Вы молодцы 👍👍👍
Благодарю!
I wish you could find me a truck like this I’ve been calling them for a while but I don’t know.
Not answering?
I'm on west coast and you looking on wrong places... There's lots cheap places here ID. UT MT WA OR AZ.. COPART around 🇺🇸 cheap buy expensive to tow home good luck
How do you retitle it?
Simply swapping the V.I.N. would be illegal.
Recertification?
You don’t retitle it. You just get salvage/rebuilt title. Yes, you can’t just swap the vin.
You just have to take it to the authorized dealer and he takes care of it. I don’t know what kind of processes they do, but at the end they just put stickers for you on the cab.
@@salvageparadise Thanks for the clarification.
How much did the whole process cost.
A soul and some very valuable internal organs lol.
@@Eternalsfan I know that's right. But still cheaper than the dealer,
Can a salvage truck have a older engine?
We don’t swap engines here, but I did here some people do it.
How much is it, all that work leber and the parts pls
по чем клиент брал этот хлам на копарте? спасибо
Hi did you guys do the old truck body shop I can bring my truck
Send me some photos:
wnccollision@gmail.com
Ouah!!! No guts no glories
More importantly why does it have a drive tire on the steer axle
Bro I gotta volvo daycab an wanna get it redone up any way I can get you to pimp my truck ?
You must know every nut bolt and screw on a Cascadia by now !!!
I actually do, body wise.
Wow wow you guys the crew are awesome incredible work. I could never afford taking my truck to your shop that’s a 2020 Freightliner I got a 97 Freightliner century class it’s held together mainly by duck tape..lol What do you do with these after repaired trucks? Sell them?? You’re there are customers fixing? Whatever don’t care it’s a great job and video kudos to the crew!!!👍👍👏👏👏
Thank, this particular project was for the customer. He bought it from copart. We sell most of them, sometimes we fleet them. Depending on mileage.
Thanks you guys do a excellent job!!
Copart doesn't give late model truck away you are paying a premium for the truck & to find a cab that will interchange with a 2020 you or who ever bought that truck paid a premium for truck the cab came off , cost of cab ,some other new &used parts paint labor the cost ????? . Hmmm amazing...
so do they have a rebuilt title like a car now
Yessir
Where’s your Shop? I have a truck that needs collision work.
Asheville, NC
how much for all of it
Do you do this kind of repairs for anyone?
Yes. We take customers. email me: wnccollision@gmail.com
Question for ya!. Will a classic cascadia cab fit this new model cascadia? Thanks in advance!
Their the same thing just different hoods and sleeper skirts and fairings
It will fit, but you can’t install new style cabinets (above dashboard) inside of old style cab.
Good job; where are u guys located?
Asheville, NC
Ok thanks
Wow to far for me great😩😩
Can you put your physical address and phone number....got Volvo 860 needs some work...
How much truck?
How many man hours project this size approximately
1 month of 40 hours per week
More man hours in one truck then I have put in in 10 years of shitty projects 😂
What's your opinion on purchasing a Rebuild?
If you buying it from the right shop I’m all for it.
Sometime you can save as much as $30,000
@@salvageparadise thank you very much , would you consider penske a reliable source? I appreciate your insight.🙏
They don’t rebuild trucks. So I wouldn’t
What do you guys charge for something like this? - labor wise
If you have any questions just email me: wnccollision@gmail.com
So the customer decided to buy a new cab than to rebuild the original but it's hard to believe that that cab could even be rebuilt though.
It’s possible but pointless.
Wooowwwww 😮😮😮😮
Amazing...👍
Rumor has it that guy drank 5 red bulls..
Bro, I need 5 red bulls just to wake up, Imagine how many I need to work this fast lol
@@salvageparadise damn you need a 55 gallon drum then and a big straw.
@salvage paridse where are u located do u have a site to get in touch???
Email me: wnccollision@gmail.com
Located in Asheville, NC
How can I get in touch with you guys for to rebuild a truck for me?
wnccollision@gmail.com
I think i know a TH-cam that are in need of youre help. & he called *The rusty cracker*
Everything is good, except for the music!
One man’s trash…💎
The only reason one would ever do this themself is because the insurance company wouldn't foot the bill and you're stuck making payments on the truck. From uneven tire wear to electrical issues, this truck will always have problems.
I guess you know better lol
@@salvageparadise There is a reason why many buyers steer clear of vehicles which have been in a accident. On top of that, in one video, they showed the guy using a tape measure to measure the squareness of the frame. A tape measure for crying out loud.🤦♂️🤔😟🤫
@@nattydreadlocks1973 I think then you should not buy these trucks from us. Go buy from dealer, that sometimes even asking our shop with our tape measure to fix their frames :)
@@salvageparadise When I did body work, I atleast used a tram if not a lazer system to measure for squareness. But what do I know?
@@nattydreadlocks1973 Summing all what you said: You used lasers and you still had uneven tire wear. Sounds like the problem is not in tools, but mechanic. We have been doing this for over 10 years now, and yes we fleet our own trucks, and we don't have problems you mentioned. About insurance company, we do work with insurance companies, and never had them call us back because something was wrong. Our customers don't have payments for trucks, neither do we. Why? because we buy these wrecked trucks for cash from insurance companies, and fix them for cash as well, saving sometimes up to $60k. So while you have payments, we make money.
What is the avg price for this?
For sale or to rebuild?
@@salvageparadise both please
How much would it cost to rebuild?
@@patrickfulton1264 questions here: wnccollision@gmail.com
🔥🔥🔥🔥🔥🔥
This is no longer 2020 model, with all those used parts I don't know what year this is. This music tho....
I don’t see how this is related. The frame is 2020, engine was manufactured in 2020, interior is 2020.
Thanks for the clarification. Awesome work. Keep it up!
🚛🚛🚛🚛🇮🇳 good
I’m just buying a new one
Can you put another video in real time not time lapse?
I really want to, but I don’t have enough time. Sorry
Just give me the engine
We recently sold 2
Do you have a website that I could go to see what is available?
Glacka Glack we don’t. You can email me though. wnccollision@gmail.com
👌
i didnt think it was legal to use a rebuilt titled semi truck lol
It’s legal.
Go to buy a truck like that and they'll tell ya how great it is and everything is brand new now and all, try and trade the same truck in and they'll tell ya it's junk and how a salvage truck isn't worth anything.
Dealers say it’s not worth anything, but they fix their trucks here. This is how they make money
Mejor me compro uno. New.
Thank you mr customer the total is 100k lol
Truck for sale, clean title, no accidents 1st owner
karne ke liye Kah Raha Hun sar mera naam Shahrukh hai main India se hun truck mechanic all rounder Tata Diesel truck truck all rounder mechanic engine gear clutch plate Di Bulandshahar welding tyre fitting vagaira all rounder mechanic hun main sar mere liye koi job hai to call back me sir 🇮🇳🇮🇳🚛🚛
🚛🚛🚛🚛🚛🚛🚛🚛🚛🚛🚛
🤙🤙🤙🤙🤙🤙🤙🤙👍👍👍👍👍
Ke buen trabajo para este hombre
im guessing all the times he is on his phoine he is ordering parts ;)
no great work really
When I’m on the phone I’m replying to comments here on TH-cam 😂
So stupid to all that money into a badly wrecked truck
I cringed when he immediately accelerated after starting the truck.
Amazing...👍