Part 1- Vacuum distillation unit in Refinery | Vacuum distillation of crude oil | VDU in Hindi

[@ManishKumar-ux9ci]

Sir, I am from EIL. Now a days i am assigned the work of HRRL refinery OBE construction. I like your videos a lot. Please keep on doing it.

[@sachinchaurasia1920]

❤easy understanding. One of the best way to explain VDU2. Must watch

[@SoNuSiNgHRefinery]

Superb information sir... Thank you so much.

[@sudheshbjain242]

इतने knowledgeable वीडियो बनाते है , इतना अनुभव है आपको, तो आपके Contact भी दमदार होंगे 😊 मदद कीजिये ताकि लोगो को जॉब खोजने या स्विच करने भटकना न पढ़े 🙏🙏

[@vonkutodongi7252]

Upne Etna achhe suggest kiya madat karne k liye...to ye bhi bata dijiye kaise madat karna possible hoge. Keise job switch karne k liye bhatak na na pore eisa keise madat kiya ja sakta hai?

[@sandeepprasadyogi7498]

Sir please provide PDFs if possible. Great work, lot of appreciations from my side, keep growing ❤️🙏

[@rajeshvishwakarma4374]

Very good information sir.
Thank you .
Waiting for the second part.

[@SandeepAcademy9]

Will upload tomorrow evening

[@chemicalengineermasti]

Sir thermal cracking hoga ya coking hoga high temperature par

[@kumaritanya2173]

Nice class ❤

[@sujeetkumar2127]

sir, we are using rco as feed for vdu,then why we are using heat exchangers to raise temperature before putting in vacuum column,and how the temperature of rco goes below 100 degree

[@sachinhumtum]

Sir you had mentiondd at high temp feed becomes coke then in heater it reaching at 400 deg C .Please guide .

[@shweta338]

Please make video on PSV sizing and selection API 520

[@rockysthenics8331]

Could you please tell what is the pressure in vacuum distillation unit normally 3-12 mm hg ?

[@mayankagrawal2981]

Sir ek air preheater k uper video bnaiye please

[@maheshnevase9650]

Thank you for video

[@Arun.828]

Thank you sir

[@yogeshpatel246]

Sir, please upload regarding DHDT unit startup and shutdown lecture

[@palbk1072]

How to draw product in vdu column...while inner side of column pressure is very low but outside pressure is high..how can possibly...to product draw in vdu column

[@rishabhgaur3898]

Thanku sir 🙏🙏

[@vivekfaldu]

Sir, please make video on how to read by proper way of GAD & Piping Isometric.

[@akshayparmar3141]

Sir explain Coker Unit in detail

[@surajkarmali5742]

Good explanation

[@SoyaRajK-92]

Thank you so much sir 🙏🙏

[@Sanjeevyadav-mg2uw]

Sir please define sop of compressor

[@adorable6462]

Great sir 💟

[@adorable6462]

Sir RFCCU ka products separation video banayege please...🙏

[@ajaytyagi4886]

Sir ek detail video hgu unit pr bnao or eskai catalyst compostion or unke use bhi btana

[@SandeepAcademy9]

OK

[@muthukumar1374]

Rfccu mein vacuum residue bhi use kar saktha hai padhaeeye sir ?

[@SandeepAcademy9]

th-cam.com/video/oXnAmR46rEw/w-d-xo.html

[@RahulMaurya-vt9hk]

Please sir make a video DHDT

[@utkrastkori3254]

Sir, why the feed temperature of the surge drum is 90 degree celsius, bcz the RCO that is coming from CDU must already have the temperature around 340 degree celsius? I request you to please clarify my doubt.

[@SandeepAcademy9]

If there is hot feed concept then feed temperature will be high...If cold feed system then temperature will be low. Cold feed means RCO first cool in CDU unit then sent to tank and finally again pumped to VDU.

[@utkrastkori3254]

​@@SandeepAcademy9 thank you sir for the clarification. In the case of hot fluid feed, we do not require that much no. of preheat train heat exchanger, may be we can directly send it to furnace after the surge drum, if I am wrong please do correct me sir.​

[@alokmanna7639]

Sir thank you.sir please heat exchanger start up bataya sir

[@SandeepAcademy9]

th-cam.com/video/X3D8v63lhow/w-d-xo.html

[@guruprasath765]

Nice ❤️

[@bhavinkumarjoshi9928]

sir please upload VIDEO REGARDING CDU, FCCU, DCU, SRU Unit

[@SandeepAcademy9]

th-cam.com/video/oXnAmR46rEw/w-d-xo.html

[@vikashkumar-ni4mc]

thanks sir 🙏

[@AnupSingh-kt5yn]

Thank you sir

[@jayminchangani5465]

Thank u sir