My '04 driver side marker went out today. After poking around for 10 minutes I came to the conclusion that I needed some help from someone that has done this before... TH-cam here I come. Jamie, outstanding idea!!! Thanks for posting this.
I just changed all my moms lights after watching this. This was the easiest thing ever and the mechanic had told he had to either take out the battery or remove the cover by the tire. Seriously thanks for this I just saved her about $200
Lauren C This was a heck of an idea. I'm not sure if it would have worked for my after market lights, but I'll check out the method for fun. FYI, removing the battery is extremely simple as well. You just need a 10mm socket and less than five minutes to get it removed.
Mike E. I was really impressed I was able to do it so easily, and thanks for the tip about the battery! She loves the car but it was a pain to get the lights changed before :)
I unfortunately couldn’t get the wire harness out. I did try a cheap open-end small wrench I had (not sure if it was the 12 or 13 end), but I was able to get it in at the right angle and turn the whole thing loose. To do this I have to be back far enough so I can actually see the wrench on it. I was also able to get it back in with my fingers and then turn/tighten back with the wrench.
Great idea. I just did this for the first time on the driver's side of my 2008 V6 Sport. My marker lights do not have an electrical connector to unplug. They are one piece and the whole thing comes out, wires attached, with a twist. They are also a lot easier to reach.
I bought some LED's from Autozone, and replaced [super simple from your video] but now it's white light instead if amber? I thought the orange plastic makes the side light orange regardless of bulb color? What am I doing wrong? In the end, are your ambers or clear when viewing? You put a clear bulb in but the package stated amber?
Bless you my 4Runner friend. Just bought a 2004 Limited V8 with 268k, I was losing my mind trying to get those out. Bought the truck with both sides burned out. I guess I can see why the previous owner never replaced them...
The side marker light on my 2005 4runner does also serve as a turn signal when the lights are on, when lights are off the amber day time running lights located below front bumper serve as running lights and turn signal / flashers. so worried about "LED Hyper flash" did you buy a resistor or upgrade your flasher control module for the new LED lights?
I don't think mine even turns on i got the bulb in there since my mom bought the suv but idk if work or not cause i don't see the bulb go off nor do ik how was kidding wanted to see it in the video as well but this help n my suv is an 03 4Runner v8 sr5
Wow. Going to try that. One guy took the whole front of the car apart plus the fender well cover off. Recommended it's easier if you have a home lift lol.
Unfortunately this does not work on a 2007 4runner. The light housing fitting is different. Don't need a socket but it's really difficult to get to on the driver's side.
my dealership used to be Toyota Rancho Santa Margarita. The guys were nice to me and changed my blinker bulb for $5.00. But now I moved to Vegas and will have to try this out to save myself $$$ and the hassle of taking vehicle in. Will let you know how i do...after i buy a 17mm socket
+1 on the socket. I ended up pulling the battery as the connector was on tight and I couldn't get any pliers on it. I wish I had just started with that and saved my 10min of hoping to sneak by.
Thanks Jamie. I have a few questions. First, did you have any problem with hyper flashing after installing the LED bulb, and if so, what did you do about it? And, I notice you're replacing an amber bulb with what appears to be a clear bulb. Did that new LED bulb end up being amber in color too? Anyway, thanks!
Jamie Franks this is the part killing me right now, I really don't want to remove my battery, hell I don't even have the time to do so. I'm currently sweating, considering pulling the whole headlight assembly.
I agree with the comment from Brinkley Stone. Why go to all of the trouble of posting this video, if you don't actually show the "money shot" of (1) disconnecting the plug and (2) getting the bulb socket out? Plus, you must have tiny little hands or something because even on the passenger side, it's not easy to disconnect the plug. And finally, my 17 mm deep socket does not fit tight enough on the bulb socket to get any grip on it. But, thanks for pointing me in the right direction. I can barely get my fingers near the thing! I think I'll remove the battery and try a different socket or needle nose pliers.
Why say "tiny little hands" are there big little hands, or tiny big hands? You should just say tiny hands or little hands but not "tiny little hands" it's redundant like saying "ATM Machine".
In my book if yota charges $280 just buy OME parts and do it yourself yes, but no LED's and remove the battery, any time you work under the hood more than likely you're going to disconnect it anyways. PS if everyone on the roads today replaced all their lights with LED's there would be a lot more wrecks, they're blinding, to bright of lights, might make you see better from 15/20 feet off inside your vehicle you think, but in reality it blinds you well beyond 20/50 feet or more.
Carl Smith - Sounds like your book isn’t one that anyone should read. I highly doubt that you disconnect your battery when you’re changing oil, or changing out your air filter. Not necessary for this either. Also, most auto manufacturers have switched over to LED lighting from the factory, so in a way everyone on the roads today *IS* replacing all their lights with LED and there is no major issue. Get a horse.
I have a 2007 4Runner and this procedure absolutely does NOT work! The turn signal bulbs are inserted into the car with the twist, stab lock retainer with the two ears that have to be turned. There is no place on this connector to place a socket. Wish somebody had a way to do this. Even with the battery removed, you need tiny little hands to reach the socket!
You most certainly are a genius! I’ll be contacting the Nobel prize committee on your behalf.
My '04 driver side marker went out today. After poking around for 10 minutes I came to the conclusion that I needed some help from someone that has done this before... TH-cam here I come. Jamie, outstanding idea!!! Thanks for posting this.
Outstanding tip with the 17 socket! Thank you!
After 3 months of no side marker light, let there be light! Thank you, your a genius.
agreed, pure Nobel peace prize material!
I went through the usual steps of cussing at the fittings and being mean to the cat and that didn't work, but this worked perfect. Thanks.
Thanks Jamie! This is brilliant. I have said a lot of curse words trying to get those damn bulbs out until I found your video.
Simply amazing. So simple. Thank you for making and posting this video as I struggled with this for 20 minutes.
Thanks a million. I couldn't remove it after several attempts. Looking for special tool on line then I found this clip.
I just changed all my moms lights after watching this. This was the easiest thing ever and the mechanic had told he had to either take out the battery or remove the cover by the tire. Seriously thanks for this I just saved her about $200
Lauren C - AWESOME!! Glad to hear it!!
Jamie Franks thank you!!!!
Lauren C This was a heck of an idea. I'm not sure if it would have worked for my after market lights, but I'll check out the method for fun. FYI, removing the battery is extremely simple as well. You just need a 10mm socket and less than five minutes to get it removed.
Mike E. I was really impressed I was able to do it so easily, and thanks for the tip about the battery! She loves the car but it was a pain to get the lights changed before :)
Trying to find a connector for my side marker. Wondering if you know where i can find one
I Would prefer the white instead of Amber,will any 194 bulbs fit?
Jimmy, thanks so much. It's guys like you that make things easier. 5 Stars
I am also struggling to remove the wiring connection. Is there a video someone could direct me to? Best.
Thanks for the video. I came to learn how to replace the bulb but love the LED idea.
Good thing only my passenger side light is out. 🏆 here’s your reward for being the only person on the planet to figure this out LOL
Thank you!!!!!!! 2004 4Runner. 5/8" deep socket tightly pressed on. Worked great!!!!!!
I unfortunately couldn’t get the wire harness out. I did try a cheap open-end small wrench I had (not sure if it was the 12 or 13 end), but I was able to get it in at the right angle and turn the whole thing loose.
To do this I have to be back far enough so I can actually see the wrench on it. I was also able to get it back in with my fingers and then turn/tighten back with the wrench.
Great idea. I just did this for the first time on the driver's side of my 2008 V6 Sport. My marker lights do not have an electrical connector to unplug. They are one piece and the whole thing comes out, wires attached, with a twist. They are also a lot easier to reach.
I bought some LED's from Autozone, and replaced [super simple from your video] but now it's white light instead if amber? I thought the orange plastic makes the side light orange regardless of bulb color? What am I doing wrong? In the end, are your ambers or clear when viewing? You put a clear bulb in but the package stated amber?
Sadly you did not say how to remove the connector so we can put the socket on.
Does it "thread" out counter-clockwise and back in clockwise?
Thank you so much! That was a tough task. It would have been impossible without your help.
Did it start hyper flashing/need a resistor? Or plug in and all good?
Bless you my 4Runner friend. Just bought a 2004 Limited V8 with 268k, I was losing my mind trying to get those out. Bought the truck with both sides burned out. I guess I can see why the previous owner never replaced them...
do you know how to disconnect the day time running lights ?
17mm socket was an elegant solution ... nice one
Going to try that tomorrow - was the LED amber or clear white?
SUPER HELPFUL! Did you have hyper flashing issues after installing the new LEDs?
You’re a lifesaver! Thanks!
Wow great tip! Does anyone know how to get the marker light out on a 2005 RAV4 I’m having a Difficult time doing it?
Great trick. Wondering if this would work on a 2011 4Runner (Gen 5) too?
The side marker light on my 2005 4runner does also serve as a turn signal when the lights are on, when lights are off the amber day time running lights located below front bumper serve as running lights and turn signal / flashers. so worried about "LED Hyper flash" did you buy a resistor or upgrade your flasher control module for the new LED lights?
So glad I just found this video! Thank you!
I don't think mine even turns on i got the bulb in there since my mom bought the suv but idk if work or not cause i don't see the bulb go off nor do ik how was kidding wanted to see it in the video as well but this help n my suv is an 03 4Runner v8 sr5
Thank you!! 2006 and marker bulb done. Thank goodness it was the passenger side.
Anyone know the part number for the piece the bulge goes into? ,, was changing mine & lost the piece... unbelievable... :(
DUUUUUUDE! Thank you for taking the time to make this video!
I could not get this to work for me. The 17mm deep socket just spun around and around. What am I missing here?
Wow. Going to try that. One guy took the whole front of the car apart plus the fender well cover off. Recommended it's easier if you have a home lift lol.
Unfortunately this does not work on a 2007 4runner. The light housing fitting is different. Don't need a socket but it's really difficult to get to on the driver's side.
2 years later....................EXCELLENT!
my dealership used to be Toyota Rancho Santa Margarita. The guys were nice to me and changed my blinker bulb for $5.00. But now I moved to Vegas and will have to try this out to save myself $$$ and the hassle of taking vehicle in. Will let you know how i do...after i buy a 17mm socket
+1 on the socket. I ended up pulling the battery as the connector was on tight and I couldn't get any pliers on it. I wish I had just started with that and saved my 10min of hoping to sneak by.
Nice trick! Darn I wish I knew all these years before I changed mine to the 06-09 housing... 👍🏽
Slick little trick! Thanks for sharing
Awesome! Thanks for sharing. Those little s.o.b.’s were always the hardest ones to get to.
Thank you! Really appreciate the help. Like the other I busted a couple of knuckles first.
Thanks Jamie. I have a few questions. First, did you have any problem with hyper flashing after installing the LED bulb, and if so, what did you do about it? And, I notice you're replacing an amber bulb with what appears to be a clear bulb. Did that new LED bulb end up being amber in color too? Anyway, thanks!
No issues with fast flashing with these LED bulb units. And yes - the LED is Amber even though it appears to be clear.
@@SARSquid79 Mine is now clear after using replacing? Confused?
Thank you. This save me a lot of money. Keep your DYI fix videos coming. I gave you thumbs up and subscribed to your channel. God bless!
Thanks for sharing this video now I switch my side markers to led thanks again
Thanks for sharing! 17mm socket did the trick.
Well done! Once you know how, it will take longer to watch this video than it does to replace BOTH marker bulbs.
I'm a little late to the party. But thank you so much for posting this.
Quick and easy, thanks for sharing!
Excellent trick! Still a pain in the neck having to unplug them.......
I wish you'd show us how the new LED looked in there when it was flashing!
Ryan McGroarty - It's a side marker lamp. It doesn't flash. I didn't show it because it doesn't hardly look any different than the OEM.
Jamie Franks Ha! I'm looking for a gen 4 4runner now. My bad
Jamie Franks I'm also curious if there is hyperflashing now
@@artymcfly935 it's not a blinker? How would it have hyperflash
Thanks, made the job easier.
Just did it today and I found that it is easier to remove the battery, less than 5 mins, than to struggle to take that socket out.
I have the 2006 and I was able to just use my hands. I think there is a slight difference/design than on the 2005. Thanks for the video though.
My ‘07 SR5 was a 22mm socket. Weird.
Jamie, thanks for the knowledge, my hands don't fit and no patience.
You’re a genius. Thanks!
Thanks, Jamie. Much appreciated.
Thought there wasn't any tools required lol good tutorial..though thank you
Genius! Thanks for the upload dude!
Thank you much! What a cool tip👍🏻
Great tip! Was a cinch to do...Thanks!
4 years later, ill try it!
Who would dislike this video🤷🏽♂️
Vom808 he said no tools
He also didn’t show what the led looked like at night and if it’s worth the extra money🤷🏻♂️
How do you disconnect the fitting?
Stevespecs - it's a standard Toyota QD electrical connector. You just have to get your fingers on it, squeeze, and pull.
Jamie Franks this is the part killing me right now, I really don't want to remove my battery, hell I don't even have the time to do so. I'm currently sweating, considering pulling the whole headlight assembly.
Just any fyi... The 4th gen is from 03-09
I agree with the comment from Brinkley Stone. Why go to all of the trouble of posting this video, if you don't actually show the "money shot" of (1) disconnecting the plug and (2) getting the bulb socket out? Plus, you must have tiny little hands or something because even on the passenger side, it's not easy to disconnect the plug. And finally, my 17 mm deep socket does not fit tight enough on the bulb socket to get any grip on it. But, thanks for pointing me in the right direction. I can barely get my fingers near the thing! I think I'll remove the battery and try a different socket or needle nose pliers.
Why say "tiny little hands" are there big little hands, or tiny big hands? You should just say tiny hands or little hands but not "tiny little hands" it's redundant like saying "ATM Machine".
Great advice 👍👍👍thanks!!
Thanks for the tip 🤘🍻
Perfect!! Thanks for the tip. Made the job a snap..
Thank you so much!
Thanks! That helped quite a bit
OH MAN THAT HELPS A LOT !!!!!!!!!!!!
IS THAT BULB SOLAR OR SOMETHING? I DIDN'T SEE ANY WIRES TO THE BULB.
“No tools”
“Just grab your 17mm deep socket!”
Three years later stupid easy!
Haha mah man! Good lookin out brother. Thanks
Thanks for the video. It was helpful, but technically you did use a tool ;}
super annoying this works for everyone else, 04 sport edition v8 17mm socket is too big, 16 too small.. glad i bought the set lol.
Badass thanks!
Thanks
Awesome, TY.
In my book if yota charges $280 just buy OME parts and do it yourself yes, but no LED's and remove the battery, any time you work under the hood more than likely you're going to disconnect it anyways. PS if everyone on the roads today replaced all their lights with LED's there would be a lot more wrecks, they're blinding, to bright of lights, might make you see better from 15/20 feet off inside your vehicle you think, but in reality it blinds you well beyond 20/50 feet or more.
Carl Smith - Sounds like your book isn’t one that anyone should read. I highly doubt that you disconnect your battery when you’re changing oil, or changing out your air filter. Not necessary for this either. Also, most auto manufacturers have switched over to LED lighting from the factory, so in a way everyone on the roads today *IS* replacing all their lights with LED and there is no major issue. Get a horse.
The drivers side was the easiest side!
woah nice trick
Dang man. I been killing my self with mine every time I changed them.
You are they man!
genius!
@3:49 - better fish that out...
Genius!
Almost 170k, so almost broken in, also you can get ten of these bulbs on Amazon for 10 bucks
awesome
I have a 2007 4Runner and this procedure absolutely does NOT work! The turn signal bulbs are inserted into the car with the twist, stab lock retainer with the two ears that have to be turned. There is no place on this connector to place a socket. Wish somebody had a way to do this. Even with the battery removed, you need tiny little hands to reach the socket!
Partisan1313 - This video does not address Turn Signals. This video is specifically for the side marker lamps.
2 thumbs up
No tools except for the 17mm deep socket haha...
Please no led headlights!! They are BLINDING especially in a rear view mirror or in your face at night!!!
Go back to non led